子午线轮胎

研究了钴盐品种和用量对NR胶料性能及子午线轮胎帘布胶镀铜钢丝帘线粘合力的影响。

The effect of cobalt salt type and level on the properties of NR compound and the adhesion strength between the cord compound and the brass plated steel cord in radial tire was investigated .

对酚醛补强树脂和高苯乙烯树脂/SBR共混物增硬子午线轮胎三角胶进行研究。

The application of the reinforcing phenolic resin and the high styrene resin / SBR blend in the bead filler of radial tire was investigated .

本论文使用VISUALBASIC开发了子午线轮胎CAD系统。

CAD system of radial tire is developed with Visual Basic in the thesis .

DSP和改性锦纶66帘线在子午线轮胎中的应用对比

Comparison between DSP and modified nylon 66 cords applied in radial tire

介绍尺寸稳定型（DSP）聚酯帘布压延工艺及其在子午线轮胎中的应用。

The calendering technique of DSP and its application in radial tire are described .

子午线轮胎活络模的花纹块模具设计与NC加工

Pattern Block Mold Design And NC Machining of Radial Parting Mold of Meridian Type

1145（Z）子午线轮胎定型硫化机的开发

Introduction of 1145 ( Z ) Radial Tire Bag o Matic Press

基于Rebar实体单元的子午线轮胎加载过程模拟

Simulation for loading process of radial tire based on Rebar element

基于Bezier曲面的子午线轮胎自由振动分析

Free vibration analysis of radial pneumatic tire via Bezier surface

防焦剂CTP在轿车子午线轮胎胎圈护胶中的应用

Application of anti-scorching agent CTP in bead chafer of PCR tire

研究再生IIR在全钢载重子午线轮胎气密层中的应用效果。

The application of reclaimed IIR in inner liner of BTR tire was investigated .

利用差式扫描量热法（DSC）对半钢子午线轮胎各部位胶料的比热进行了测试。

Measurements of the heat capacity of steel-belted tire rubber composites were performed with Differential Scanning Calorimeter ( DSC ) .

采用改性锦纶66帘线试制ST系列子午线轮胎，并与聚酯帘线子午线轮胎进行性能对比，成品耐久性能比聚酯帘线轮胎有较大提高；

A modified nylon 66 cord was used to produce ST series radial tires and the test tire was compared to the corresponding polyester tire .

本文应用大型有限元分析程序ANSYS，建立了子午线轮胎205/60R15的完整有限元模型。

A finite element model of radial tire which type is 205 / 60R15 was built by ANSYS which is a large finite element analysis procedure .

通过并用NR并加入适量陶土，对全钢载重子午线轮胎气密层胶配方进行改进。

The BIIR-based formula of inner-liner in TBR tire was modified by blending NR and adding proper level of clay .

SUV型无内胎子午线轮胎的设计

Design of SUV tubeless radial tire

介绍了1145（Z）子午线轮胎定型硫化机的结构、结构特点、采用的新技术以及为保证制造精度而采取的各种工艺措施。

The structure and new technology of 1145 ( Z ) radial tire Bag o Matic press and the technical measures to ensure manufacturing precision are described .

试验研究防焦剂CTP减量对轿车子午线轮胎胎圈护胶喷霜的影响。

The influence of anti-scorching agent CTP on blooming from bead chafer of PCR tire was experimentally investigated .

子午线轮胎非线性分析的分片Rayleigh-Ritz法

Nonlinear Analysis of Radial Tires via Piece-Wise Rayleigh-Ritz Technique

试验研究液体IR（LIR50）在全钢子午线轮胎胎面基部胶中的应用。

The application of liquid IR ( LIR50 ) in tread base of BTR tire was experimentally investigated .

以尺寸稳定型聚酯（DSP）和改性锦纶66帘线作为轿车和轻型载重子午线轮胎的胎体骨架材料，对比分析轮胎外缘尺寸和静负荷特性。

The dimension-stable polyester ( DSP ) and modified nylon 66 cords were applied in the carcass ply of PCR tire and LTR tire , and the overall diameters and static loading capacities of test tires were compared .

基于Surfacer和Pro/E的子午线轮胎花纹结构反求设计

The Reverse Engineering Design of Tread Pattern Based on Surfacer and Pro / E

改性增粘树脂TKM系列在子午线轮胎中的应用

Application of modified tackifying resin TKM series to radial tire

改性间苯二酚-甲醛树脂GLR-20在半钢子午线轮胎中的应用

Application of modified resorcinol-formaldehyde resin GLR-20 in PCR tire

研究促进剂TBSI在全钢载重子午线轮胎上三角胶和胎体胶中的应用。

The application of TBSI accelerator in upper bead filler and carcass compounds of BTR tire was investigated .

橡胶改质剂SPE-100在全钢载重子午线轮胎胎面胶中的应用

Application of rubber modifier SPE-100 in tread compound of TBR tire

环保型塑解剂SL-6011在轿车子午线轮胎粘合胶中的应用

Application of environment-friendly peptizer SL-6011 in bounding rubber of PCR tire

采用ANSYS软件非线性分析技术，通过三维体单元、层单元和接触单元，建立了60系列的R15型子午线轮胎的三维有限元模型。

Using the Non-linear analysis technology of ANSYS software , the three-dimension finite element model of radial tyre is built with three-dimension volume element , layer element and contacting element .

国产不溶性硫黄OT-20在全钢载重子午线轮胎中的应用

Application of domestic insoluble sulfur OT-20 in TBR tire

试验研究促进剂TBSI在全钢子午线轮胎胎体胶中的应用效果，并分别与促进剂NS和DZ进行等量和减量对比。

The application of accelerator TBSI in carcass ply compound of TBR tire was experimentally investigated and compared to those of accelerator TBBS or DCBS by equal weight or less weight respectively .