喷气织机

pēn qì zhī jī
  • air-jet loom
喷气织机喷气织机
  1. 介绍了基于ARM7的喷气织机控制系统设计。

    An air-jet loom control system design based on ARM7 was presented .

  2. 基于CAN总线喷气织机控制系统的研制

    Air-jet loom control system based on CAN bus

  3. 基于Web的喷气织机远程监测系统的研究

    Study of Web-based Remote Monitoring System on the Air-jet Looms

  4. Air(初三适用)织造轮胎帘子布的喷气织机

    Air - Jet Weaving Machine for Weaving Tire Cord

  5. 基于DSP的喷气织机控制系统的软件设计

    The Software Design of Air Jet Loom Control System on DSP

  6. PC型喷气织机储纬器的研制与测试

    Manufacturing and Test of PC Pick Storer for Air-jet Looms

  7. 多CPU分布式控制的新型喷气织机电控系统

    Distributed control system of air-loom based on multi-microcomputer

  8. 基于FLUENT的喷气织机主喷嘴气流场分析

    Analyses on the Flow Field of the Main Nozzle in an Air-Jet Loom Based on FLUENT

  9. 基于FLUENT的喷气织机主喷嘴内部气流场三维数值分析

    3D Analyses on the Inner Flow Field of the Main Nozzle in Air-Jet Looms Based on FLUENT

  10. PIV技术在喷气织机主喷嘴流场测量中的应用

    PIV Technology Application of Main Nozzle Flow Field

  11. ZA205/209i喷气织机FDP变频板的维护

    Maintenance of the Frequency Inverting Plate FDP on Air-jet Looms ZA205 / 209i

  12. 基于arm7的嵌入式系统在喷气织机控制技术中的应用

    The Air Loom Control System Based on ARM7 Embedded System

  13. ZA型喷气织机电子送经装置及其性能分析

    ZA Electronic Let-off Device on Air Jet Looms and its Performance Analysis

  14. ZA型喷气织机喷气引纬控制系统的改进

    Advancement of ZA air jet loom for air leading weft control system

  15. ZA型喷气织机主喷嘴内流道气流特性分析

    Characteristics of Air Flow in Internal Passage of Main Nozzel of ZA Air-jet Loom

  16. 为了在单织轴喷气织机上顺利生产平纹加缎纹条联合组织织物,对纱线的强力、条干CV等方面提出了更高的要求。

    To produce join stitch fabric which is combined plain weave with stain in single loom bean air-jet loom , higher demand for yarn strength and evenness CV were proposed .

  17. 我公司还是韩国SH双龙陶瓷喷嘴、喷针喷体浙江福建总代理,日本津田驹、丰田喷水织机、喷气织机配件的代理商;

    I still South Korea 's Ssangyong SH ceramic nozzle , spray-spray needle agent in Fujian , Zhejiang , Japan Tsudakoma , Toyota Loom water , air-jet looms parts of the agents ;

  18. 探讨喷气织机织造Tencel氨纶织物时的各工序技术关键及重要工艺参数,分析Tencel氨纶织物服用性能。

    Key technical and processing parameters for Tencel Spandex fabric woven on an air jet loom were investigated , and the wearability of Tencel Spandex fabric was analysis .

  19. 使用CVI软件设计了一种基于虚拟仪器的频谱分析仪,并将其运用于喷气织机振动传感器输出信号测试与分析中,建立了整个测试系统。

    A VI-based spectrum analysis instrument using CVI software is designed and it is used to test and analyze sensor output signal of jet loom vibration . The whole testing system is established .

  20. ZA-203型喷气织机引纬系统原理与实践

    Working Principles and Application of Weft Insertion System on ZA-203 Air-jet Loom

  21. 变频调速技术在ZAX-e型喷气织机上的应用

    Application of frequency inverter technology in ZAX-e air jet loom

  22. 由1515型改造的ZS-190型喷气织机

    1515 Looms Remade to ZS-190 Air-jet Type

  23. 从1515有梭织机和ZA型喷气织机的机架和筘座的振动测量出发,比较了两种四杆打纬机构的结构、运动学参数和动态性能。

    The article , starting with the oscillating measure of the loom frame and the lay of 1515 shuttle loom and ZA-style air-jet loom , compares the structures , kinematics parameter and dynamic performance of two kinds of four-bar linkage beating-up mechanisms .

  24. 分析了ZA200型喷气织机开口凸轮的作用、设计、工艺要求及主要参数的选择依据。

    Analysis is done to mechnism of open cam of air jet looms ZA2000 , the design , process and the main specifications for refernce .

  25. 本文阐述了国内外喷气织机的发展过程及现状,并对ZA200系列喷气织机作了较详细的介绍。

    The article gives us a detailed introduction to ZA200 air-jet loom series whileexpounding the development and status quo of air jet looms home and abroad .

  26. 本文对PAT-W型喷气织机引纬系统中的储纬器、主喷嘴、接力喷嘴、探纬器进行了介绍和特点分析;

    The paper offers the weft storer , main nozzle , relay nozzle and weft feeleron wefting system of PAT-W air-jet loom , and also makes analysis of its characteristic .

  27. 测量了丰田JA型喷气织机的引纬气流速度,用最小二乘原理归纳了引纬气流速度的分布规律,并对影响气流速度的因素进行了分析。

    This paper first measured the velocity of air flow used to insert weft yarn on common multi-nozzle profile reed air jet loom , concluded the distribution patterns of weft insertion air flow by using the least square method , and analysed the factors which affect weft insertion flow speed .

  28. 本文主要以WG-2000型喷气织机后梁系统为研究对象,分析开口、打纬、松经运动及后梁的摆动对经纱变形及经纱张力的影响。

    This dissertation makes the back rest system of type WG-2000 air-jet loom as the research object , analyzes the influence on warp deformation and warp tension by shedding motion , beating-up motion , warp loosing motion and back rest oscillating motion .

  29. PAT-A型喷气织机编码器原理与检修

    Working Philosophy and Maintenance of Encoder on the Air-jet Looms PAT-A

  30. 剑杆织机和喷气织机减少横档的措施和进展

    Cutdown of Starting Marks of Rapier and Air - jet Looms