反射镜

fǎn shè jìng
  • mirror;reflector;speculum
反射镜反射镜
反射镜[fǎn shè jìng]
  1. 步进电机对空间大惯量反射镜驱动性能的研究

    Study on Performance of Stepping Motor Driving Super Inertia Speculum

  2. 大惯量反射镜在空间研究中广泛应用,采用步进电机可实现对反射镜的驱动。

    In order to adapt to the extensive application of super inertia speculum in space detection , the stepping motor is used to drive the speculum .

  3. 采用光子晶体与全向反射镜提高LED光提取效率

    Enhanced Light Extraction Efficiency of LEDs by Using Photonic Crystal and Omni-directional Reflector

  4. 软X射线多层膜反射镜的反射率测量

    Measurement of soft X-ray multilayer mirror reflectance

  5. 空间相机用碳化硅(SiC)反射镜的研究

    Research of SiC Reflection Mirror for Space Camera

  6. 空间用SiC反射镜表面改性的性能和可靠性评估

    Performance and Reliability Evaluation for The surface Modification of Space Used Silicon Carbide Mirror

  7. 通过X射线衍射方法,测定了碳化硅空间用反射镜坯体的残余应力。

    The residual stress of the reaction bonded silicon carbide ( RBSiC ) space-borne mirror was tested by x-ray diffraction .

  8. 航天反射镜材料SiC

    Mirror Material SiC for Space Application

  9. 大尺寸轻型SiC光学反射镜研究进展

    Optical large scale lightweight SiC mirrors

  10. 微光学自适应技术中基于PZT薄膜的微反射镜工艺研究

    Technical study of micro-mirror based on PZT films in adaptive optics

  11. 本文主要介绍软X射线等离子体光源、多层膜软X射线反射镜和软X射线显微镜。

    The main topics discussed in this paper are soft X-ray plasma sources , multilayer soft X-ray mirrors and soft X-ray microscopes .

  12. 在此基础上对四种不同的改善半导体激光器相干特性的技术方案进行了深入的实验研究,它们包括:(1)由普通反射镜构成的LD外腔。

    These include : ( 1 ) an external cavity with a conventional mirror .

  13. 光栅产生的Ⅰ级和Ⅱ级衍射光被两个全反射镜反馈回染料池,染料由N2激光器横向泵浦。

    The 1st and 2nd diffraction light from the grating is fed back by two mirrors with full reflectivity into dye-cell pumped by N_2-laser transversely .

  14. He-Ne激光管反射镜膜层的表面分析

    Surface analysis of the films for He-Ne laser mirrors

  15. 半导体可饱和吸收反射镜及其在自启动锁模fs脉冲固体激光器中的应用

    Semiconductor Saturable Absorber Mirrors and Their Applications in Self-starting Femtosecond Solid State Lasers

  16. TOF电子能谱仪抛物面电子反射镜参数计算抛物面反射镜的着色膜

    Calculation of parameters for parabolic reflecting mirror in TOF electron-energy spectrometer

  17. 微反射镜和V字型光纤槽通过对(100)单晶硅的各向异性腐蚀实现。

    The mirror and V-grooves are fabricated in a one-lever mask by bulk micromachining of ( 100 ) monocrystalline silicon with anisotropic wet etchants .

  18. 反射镜用Kelvin支承定位精度研究

    Research on Accuracy of Relocation of Mirrors ' Kelvin Mount

  19. 快速反射镜双X-Y轴控制的仿真研究

    Simulative research on dual X-Y axis control of fast steering mirror

  20. 讨论了F-P腔反射镜RF及RB的最佳选择,同时也讨论了F-P腔夹层的非线性介质材料、腔长等的选择。

    The optimal selection for the reflectivity H ? and Rs of F-P mirrors , nonlinear optical layer in F-P cavity and cavity-length was discussed .

  21. 以X小型遥控光电经纬仪为背景,研究了双反射镜式光电经纬仪的总体设计。

    The overall design of the double reflector optical - electronic theodolite is studied on the background of " the X small remote - control optical - electronic theodolite " .

  22. Coons曲面在汽车前照灯多曲面反射镜设计中的应用

    Design of multi - surface reflector headlamp using Coons surface

  23. 椭圆光孔上的Fraunhofer衍射图样X光掠入射平面反射镜系统的制备

    Fraunhofer Diffraction Diagram on an Ellipse Aperture Manufacturing Technology of an X-ray Grazing Mirror System

  24. Talbot干涉仪反射镜转角误差对光纤光栅写入的影响

    Effect of Turning Error of Reflectors in Talbot Interferometer on Writing of Fiber Bragg Grating

  25. 红外反射镜a-C·H/Au/Cu/Cu的设计与实验室工艺

    Design and laboratory technique of IR-reflecting mirror a-C : H / Au / Cu

  26. 类镍钽软X射线激光用反射镜是周期多层膜,其膜层厚度小、周期数多,制备难度大,实际反射率远小于设计值。

    The high reflective mirrors for Ni-like Ta soft X-ray laser are periodical multilayers , whose layer thickness is small and the period number is large , which make them extremely difficult to fabricate .

  27. 以某反射镜组件为例进行了计算,结果表明,子结构模态综合法与经典的整体FE分析法比较,求解的前10个固有频率误差小于7%,计算时间前者为后者的2/3;

    The results indicate , modal synthesis of substructure contrasting to the classical FE method , normal frequency errors are less than 7 % , the calculate time is shorten to 2 / 3 ;

  28. 用Kramers-Kronig关系求出反射镜的相位色散

    Application of Kramers-Kronig relations for calculating phase dispersion of reflective mirrors

  29. 本文重点介绍了WIDE系统的设计原则和技术指标的确定,以及为保证指标的实现,确定球面反射镜和后投影屏设计、制造和检测指标。

    This paper mainly introduces design principles and technology parameters of WIDE System . To Ensure realization of those parameters , criteria for designing , manufacturing and testing of spherical mirror and back projection screen of this system are discussed .

  30. 报道了用于啁啾脉冲振荡器(CPO)和啁啾脉冲放大器(CPA)的高色散反射镜的进展。

    We report on the development of highly dispersive mirrors for chirped-pulse oscillators ( CPOs ) and amplifiers ( CPAs ) .