压力机

PLC在双动压力机控制系统中的应用

Use of PLC in the a double-action press control system

机械压力机PLC控制仿真软、硬件的研制

Emulational hardware and software investigation for PLC control of the mechanical press

压力机液压、气动原理图的CAD

CAD of Hydraulic and Pneumatic Schematic Diagram of a Press

尾砂成型压力机PLC自动控制程序设计

Design to PLC Automation Control Program for Tailing Molding Press

摩擦压力机机身铸钢件铸造工艺CAD生产总结

The Production Summarize for Casting Technique CAD of Steel Casting of Friction Press Frame

数控压力机CNC系统的研究

The study on the CNC system of CNC punching press

论述了对通用机械压力机可编程控制器（PLC）控制进行计算机模拟的必要性及可行性，研制了相应的模拟软件。

A software to simulate mechanical press with programmable controller ( PLC ) control was developed .

技术创新使CNC压力机赢得市场

Earn CNC Punch Press Market from Technical Innovation

利用ANSYS软件对高速压力机组合机身进行优化设计。

With using ANSYS , design optimization was developed to the high-speed press frame .

定宽压力机（SP）同步控制原理及调试

Synchronous Control Principle and Adjustment of Sizing Press Machine

现有各种数控中心、CNC机床、镗床、龙门铣床、压力机等先进的生产设备。

There is numerical control center , CNC machine , milling and boring machine , press machine and other advanced machines .

用PLC改造AБ6130型100t多工位自动压力机控制系统

Controlling system transformation of AE 6130 type 100t multiple stations automatic press with PLC

步冲压力机IPC数控系统

IPC CNC system for punching and nibbling press

本文介绍研究、自制、应用125吨立式“U”型钢压力机的情况。

The process of the test , manufacture and use of the125 " U " shape steel vertical press was introduced .

根据压力机液压气动原理图的设计特点，开发了压力机液压、气动原理图的CAD软件，介绍了其程序框图及应用框图。

The CAD software , Which can be used for designing the hydraulic and pneumatic schematic diagram of a press , is developed according to the characteristics of the hydraulic and pneumatic schematic diagram of press .

建立了机械压力机PLC控制仿真板硬件系统，并对所编制的具有良好的综合性能的仿真软件的组成及功能进行了阐述。

The emulation hardware board system of PLC control for the mechanical press has been set up and the compositions and functions of the emulation control software has been discussed , which has nicer general performance .

对压力机循环润滑的供油品质的影响进行了分析，提出了一种供油品质控制系统的设计方案，并对PLC控制部分的工作原理和设计要点进行了分析。

The influence of oil supplying quality on circulation lubrication of presser was analyzed . A project for quality control of oil supplying was presented , and the PLC control scheme and the design issues were analyzed .

实验采用大载荷压力机将粉末样品压片，用扫描电子显微镜（SEM）检查样品的表面形貌。

The powder sample of the ferromolybdenum alloy was pressed into thinner disc using the ( hydraulic ) universal testing machine , and the disc sample 's morphology is observed with scanning electron microscope ( SEM ) .

通过选择Hopkinson杆加载实验装置，利用自由式Hopkinson杆加载实验来研究延期药的抗冲击性能；利用螺旋压力机研究延期药的压碎强度。

Crushability intensity was studied by screw pressure machine . The performance of resist impact capability was studied in the free Hopkinson Bar experiment .

介绍了MCS－51单片机多机通讯技术在曲柄压力机多点测量中的应用，并对其硬件结构和软件设计方法进行了阐述。

To introduce application of communication technology of multiple single chip processors in multipoint measurement for crank press . And the hardware structure and software design are described in this paper .

结合青岛澳柯玛集团采用PLC改造400t压力机控制系统的实例，论述了PLC电气控制系统的控制原理、硬件选择、程序设计。

Combine with the sample of PLC control system for 400t pressing machine in Qingdao AUCMA Group , the system 's control principle , component choose , and programmer design are studied in this paper .

采用300t压力机，对半固态ZL116合金进行了模锻成形实验。

Thixoforging tests on semi-solid ZL116 alloy were carried out using the300 T press machine .

介绍了日本网野（AMINO）公司开发研制的电动伺服压力机的结构和工作特点，指出了几种不同驱动方法的电动伺服压力机的发展动向、使用实例和适用范围。

This paper gives the introduction of the structure and characteristics of the Electrical Servo Press , developed by the Japanese Company & Amino . It aims to demonstrate the development , best practice examples , and application scope for electrical servo press using different drivers .

首先，应用Pro／MECHANICAMotion建立了压力机曲柄滑块机构的多刚体动力学模型，对该机构进行了运动学和动力学仿真分析，并通过空气弹簧来平衡曲柄滑块机构的惯性力，提高滑块的工作平稳性。

Firstly , the multi-body dynamics model of the crank and slider mechanism was built up . The kinetic and dynamic simulation analysis was studied using Pro / MECHANICA Motion . The inertia force was balanced by air spring , which could enhance the stability of the slider .

针对JF75G-125型闭式曲柄压力机侧向惯性力得不到平衡的问题，提出了一种对称布置的结构方案，实现完全意义上的动平衡。

To alleviate the inertial forces of JF75G-125 type press , a symmetry scheme is presented to realize full dynamic balance .

公司专业生产制造CJK0620-6135系列数控机床、JC04系列台式精密压力机及多功能台式钻床系列。

The company manufactures CJK0620-6135 series numerical control lathe and desk-top accurate press of JC04 series and multi-functional desk-top drilling machine series professionally .

并以5MN数控多工位压力机作为基型，开发了机电一体化的高技术系列产品，展望了该产品的市场前景。

On the basis of5MN numerical control multi-station press , the machines combining mechanical and electrical of high-technique have been developed , which analyses the machines market foreground .

通过在伺服改造后的JB-04型压力机上进行的实验表明，该系统结构简单、测量精度高，适合对压力机的机械性能进行检测。

The experiment on the servo rebuilt JB-04 press shows that this system has high measuring precision , which is suitable for measuring the mechanical properties of presses .

介绍了大行程机械压力机的结构特点及其对精度调整的影响。在实践的基础上，总结了J39400、J39500系列机械压力机的精度调整过程及其要领，可供同行借鉴。

To introduce structure features of mechanical press with large stroke and their effect on accuracy adjustment Describes adjusting process and its keypoint of Series J39 400 , J39 500 mechanical presses .

介绍了8000kN／5000kN闭式四点双动拉伸多连杆压力机的总体技术方案和经过CAD优化设计的内外滑块多连杆主传动系统等关键技术。

In this paper , the author introduces general layout of 8000kN / 5000kN straight side 4 point double action multi bar link press as well as know how of multi bar main driving system for inner and outer rams , designed by CAD optimization .