高温蠕变

ɡāo wēn rú biàn
  • high temperature creep;elevated temperature creep
高温蠕变高温蠕变
  1. SiC颗粒弥散对相变增韧陶瓷高温蠕变性能的影响

    The elevated temperature creep behavior of SiC particulate dis & persed and phase transformation toughened ceramics

  2. TiAl合金层片组织具有相当好的室温断裂韧性和抗高温蠕变性能,但层片团中强烈的塑性各向异性导致其室温塑性很低。

    The fully lamellar microstructure ( FL ) of TiAl alloys exhibits good ambient fracture toughness and elevated temperature creep resistance .

  3. 细晶Al2O3-TiN复合物的高温蠕变

    Creep deformation of fine grained Al 2O 3 tin Composites

  4. Al2O3/SiC复相陶瓷的高温蠕变与持久强度

    Creep and stress ageing of al_2o_3 / SiC multiphase ceramics at high temperature

  5. SiCP/ZA27复合材料界面微结构分析及高温蠕变性能

    Interface structures and high temperature creep property of sic_p / za27 composite

  6. W和Co对Ni-20Cr基合金高温蠕变行为的影响

    Influence of W and CO on high temperature creep behaviour of NI-20 CR base alloys

  7. 氮化硅陶瓷高温蠕变行为及Y2O3和CeO2的影响

    High Temperature Creep Behavior of Si_3N_4 Ceramics and Effect of Y_2O_3 and CeO_2

  8. Nb和Mo对Fe3Al基合金高温蠕变性能的影响

    Effect of Molybdenum and Niobium Additions on Greep-Rupture Properties of Fe3 Al-Based Alloys

  9. TiAl合金PST晶体高温蠕变特性及蠕变失稳机制

    Compression creep behavior and instability mechanism of TiAl PST crystals at high temperature

  10. 原位合成TiB2/ZL109复合材料的高温蠕变行为

    High temperature creep behavior of in situ synthesized tib_2 / zl109 composite

  11. ZTA陶瓷复合材料的高温蠕变及延迟断裂行为研究

    Study on High Temperature Creep and Delay Fracture behaviors of ZTA Ceramic Composite

  12. MX相尺寸较小,在高温蠕变过程中较稳定,对持久强度起着强化作用。

    MX size is smaller , stable in high temperature creep process , plays an enhanced role for lasting strength .

  13. 由于Ti(C,N)金属陶瓷具有更高的热硬度、更好的抗氧化性和抗高温蠕变能力,因此被广泛用做刀具材料。

    Ti ( C , N ) - based cermets have been widely used as the tool materials because of its higher red hardness , better resistance to oxidation , and better resistance to creep at high temperature .

  14. 结果表明材料的高温蠕变性能与Al2O3含量有密切关系;抗蠕变性能好坏的排列顺序为Ⅱ等>Ⅰ等>Ⅲ等。

    The results indicate that their creep properties at high temperature are closely related to the Al_2O_3 content , the creep resistance of the bauxites being in the order of grade ⅱ > grade ⅰ grade ⅲ .

  15. 纤维体积分数对3Al2O3·2SiO(2f)/ZL107复合材料高温蠕变的影响

    Effect of fiber volume at high temperature on creep of 3al_2o_3 · 2sio_ ( 2f ) / zl107 composite

  16. 原位自生7715D基复合材料高温蠕变性能研究

    High Temperature Creep Deformation Properties of in Situ Synthesized 7715D Titanium Matrix Composites

  17. 纳米Al2O(3(P))增强铜基复合材料具有很好的高强、高导电和良好的抗高温蠕变、耐磨减磨性能,在电子、电工和信息产业领域具有广泛的应用前景。

    Copper matrix composites reinforced by Nano-Al2O3 ( p ) can provide excellent performances such as high strength , high electric conductivity .. anti-high temperature creep and resistance to wear , which have a broad application foreground in the field of electrotechnics , electronics and information technology .

  18. 热处理对莫来石增强ZL107高温蠕变的影响

    The Effect of Heat Treatment on the High Temperature Creep of 3Al_2O_3 2SiO_2f / ZL107 Composites

  19. 较详细地介绍了提高9~13Cr钢高温蠕变强度的措施。

    The measures to improve high temperature creep rupture strength of 9 ~ 13Cr steel are detailed .

  20. 本研究利用电子探针和扫描电子显微镜(SEM)对高温蠕变Nicalon/Sic复合材料进行了纤维/基体介面的成份和断口形貌分析。粗合成纤维混凝土力学性能及纤维-混凝土界面粘结行为研究

    The composition of fiber-matrix boundaries and the fractography of fracture surfaces in Nicalon / Sic composites have been analyzed by means of Electron Microprobe and Scanning Eletron Microscope ( SEM ) . MECHANICAL PERFORMANCE OF SYNTHETIC STRUCTURAL FIBER REINFORCED CONCRETE AND BOND BEHAVIOUR OF FIBER-MATRIX INTERFACE

  21. 新型马氏体耐热钢P92钢以其卓越的抗高温蠕变性能,成为超超临界火力发电机组的主蒸汽管道用材。

    The new martensite heat-resistant steel P92 by its remarkable anti-high temperature creep strength behavior , as candidate alloys for supercritical plants as the main steam tube .

  22. 本文在文献[1]的基础上,用电子显微镜透射方法研究了一种镍基合金(Ni80Cr20Ti)在高温蠕变第一和第二阶段内的位错结构。

    On the basis of the previous paper [ 1 ] , dislocation structures in the primary and secondary stages of high temperature creep of a nickel base alloy ( Ni80Cr20Ti ) have been studied by transmission electron microscopy .

  23. 一个新的金属高温蠕变空洞形核理论模型

    A Cavity Nucleation Model During High Temperature Creep Deformation of Metals

  24. 损伤力学方法在汽轮机高温蠕变损伤分析中的应用

    Application of Damage Mechanics on High Temperature Creep Analysis of Turbine

  25. 高温蠕变与断裂评价的若干关键问题

    Some critical issues in creep and fracture assessment at high temperature

  26. 一种单晶合金的高温蠕变行为及其变形特征

    Creep behaviors and deformation features of a single crystal nickel-base superalloy

  27. 锡铅稀土钎料合金高温蠕变性能试验研究

    An Experimental Study on the Creep Properties of Sn-Pb-Re Solder Alloy

  28. 一种含Re单晶镍基合金的高温蠕变行为

    Creep Behavior of Single Crystal Nickel-Base Superalloy Containing Element Re

  29. 高温蠕变分析的非线性连续损伤力学模型

    Nonlinear continuum damage mechanics model on high temperature creep analysis

  30. 微型试样高温蠕变试验系统设计

    Design of Test System of Minitype Specimen High Temperature Creep