阻燃性

在没有经过辐照过的样品中添加红磷，即使掺杂量达到12.5%，都不能很好的提高PA-6的阻燃性。

Red phosphorus contained in non-irradiated polyamide-6 at concentrations up to 12.5 does not significantly improve the fire resistance of the polymer .

氧指数实验、热重分析实验表明：三聚氰胺（Mel）的引入，可减少含磷阻燃剂的用量，提高含磷UPR体系的阻燃性。

The oxygen index test and TG analysis reveal that the introduction of melamin can reduce the use of phosphoric flame retardant and improve the fire resistance of phosphoric UPR system .

用Al（OH）3提高共聚甲醛阻燃性的研究

Study on flame retardancy of acetal copolymer improved by aluminum hydroxide

阻燃性建筑穿线用可弯曲硬质PVC管材

Flame-Resisting Bendable Rigid PVC Pipe Used As Building Service Wire Conduit

提高ABS塑料阻燃性两种方法的比较

Comparison of Different Methods in Elevating Flame Retardant of ABS Plastics

纳米Mg（OH）2的分散性对ABS阻燃性及加工流动性的影响

Effect of Dispersion of Nano-meter Mg ( OH ) _2on Flame Retardance and Processing Flowability of ABS

聚合物材料燃烧性和阻燃性的评价&锥形量热仪（CONE）法

Utilization of cone calorimeter for the appraisal of the flammability and flame retardancy of polymeric materials

HIPS插层复合材料的结构与阻燃性的关系

Relationship Between Intercalated Structure and Flame Retardancy of HIPS / Montmorillonite Composites

研究了在共聚甲醛中加入Al（OH）3或Mg（OH）2后，产物的阻燃性及力学性能。

Flame retardancy and mechanical properties of acetal copolymer blended withAl ( OH ) 3 or Mg ( OH ) 2 were studied .

高阻燃性PVDF乳胶泡沫复合材料

PVDF latex foam composites provide high flame resistance

阻燃性LDPE电缆料的研制

A Study of the Flame Retarded LDPE Cable Compound Q & A on Sex

采用PANOF转杯纱开发的织物在阻燃性、耐磨性方面明显优于环锭纱织物。

The flame retardant fabric developed with rotor spun PANOF yarns was obviously superior to that with ring spun yarns .

着重探讨了含极性基团的乙烯基单体种类及用量等因素对PP阻燃性的影响。

The effects of the type and content of vinyl monomer containing polar group on the flame retardance of PP were studied .

PBT的低烟阻燃性研究

Studies on Low Smoking Flame Retardance of PBT

结果表明：TFR1填充软质PVC的氧指数可达37.2%，阻燃性优于Al（OH）3、Mg（OH）2等阻燃填料；

Results show that the TFR1 / PVC system has superior flame-retardance with an oxygen index up to 37.2 % .

用回归分析法对EPDM胶料的阻燃性和物理机械性能进行研究。

Study on the properties of halogenless and flame retardant EPDM blends with the method of regression analysis .

阻燃性ABS塑料的注塑成型阻燃增塑剂LBC热稳定性的研究

Study on heat stability of flame retarding plasticizers LBC

FPP对Al（OH）3/PP复合材料的流动性、阻燃性和结晶行为的影响

Effect of PP-g-AA on melt flow index , limiting oxygen index and crystallization behavior of al ( oh ) _3 / polypropylene Composites

为提高ABS树脂的阻燃性，扩大其应用领域，本文分别采用了添加低分子阻燃剂、自熄性聚合物以及两者并用的阻燃方法对ABS进行了阻燃研究。

In order to elevate the flame retardancy of ABS and extend its applications in various fields , we have investigated different flame retardant methods .

对美国Borgwarner公司生产的阻燃性ABS（牌号KJW）进行了注塑工艺及阳燃试验。

Flame-retarding ABS ( KJW of Borg Warner Co. ) has been used in injection moulding test .

结果表明，所研制的聚氨酯（PU）胶不仅具有优良的粘接性能，而且还具有良好的抗流淌性、阻燃性及操作性能。

The properties of the adhesive were studied and the results showed that the PU adhesive not only had excellent bond strength , but also had good anti flowing property and fire retardancy .

结果表明，此5种处理剂均能提高木材的抗吸水性、阻燃性，并显著提高了木材的硬度，纳米SiO2的添加对木材硬度的提高有显著作用；

Results showed that all of the modifiers reduced water absorption of poplar wood and enhanced its flame resistance and hardness . Nano-SiO-2 showed a marked effect in improving the hardness of wood .

线型PPS树脂具有良好的加工性能，是制备纤维的原料，PPS纤维具有很强的耐化学腐蚀性、耐热性、强度、阻燃性、以及良好的纺织加工性能。

Linear PPS resin has good processing performance , it can be prepared of fibers which has a strong chemical resistance , heat resistance , strength , flame resistance , and good textile processing performance .

FB酚醛树脂就是这种新型高阻燃性树脂，现已研制成功并投入批量生产，本文介绍了FB树脂的阻燃性能。

FB phenolic resin is one of this new kind of high performance flame retardant resins , having been developed and put into lot production . The flame retardant property of FB resin is described .

因密度、比刚度、高温比强度和阻燃性等方面的优势，TiAl基金属间化合物被认为是最有应用潜力的新一代结构材料。

Due to their advantages in density , specific rigidity , specific high temperature strength and burning resistance , the TiAl based alloys are considered a new generation of high temperature structural materials of the most potential applications .

双马来酰亚胺树脂（BMI）具有优异的耐高温、耐辐射、电绝缘性、阻燃性，以及良好的尺寸稳定性和力学性能，已被广泛用于先进复合材料的树脂基体。

Bismaleimide ( BMI ) resin has outstanding thermal stability , radiation resistance , electric insulativity , high flame resistance , as well as good dimensional stability and mechanical properties , which has been widely used as resin matrix in advanced polymer composites .

为了在提高ABS阻燃性要求的同时，又能保持、甚至改善ABS的力学性能，本文于ABS/PVC/Sb2O3体系中加入了增容剂CPE及自制助剂TR，建立起五组分阻燃ABS共混体系。

Aimed at keeping the mechanical properties of ABS unchanged or improved while flame retardancy increased , we add CPE and TR to the systems of ABS / PVC / Sb 2O 3 . Thus , the blend system with five factors is established .

结果表明，BPP毒性低，热稳定性高（开始分解温度达310℃以上），阻燃性好，能显著改善树脂的加工性能和力学性能。

Results showed that BPP had low toxicity , excellent thermal stability ( the initial decomposition temperature over 310 ℃), highly efficient flame retardance and can significantly improve resin processibility and mechanical properties .

实验结果表明：PVC对体系的阻燃性贡献显著，且与Sb2O3有协同作用。ABS用量的增加可明显改善共混体系的韧性。

It was showed that , PVC had remarkable contribution to the flame-retardancy , and had synergistic effects with Sb 2O 3 . The toughness of the blend system could be improved with increasing of the amount of PA-747 of ABS .

试验结果表明，蜜胺泡沫的密度随着甲酸、正戊烷和op-10用量的增加先减小后增加，发泡效果先变好然后变差。MF（三聚氰胺甲醛树脂）泡沫具有良好的阻燃性。

The result is as following : with the amount of formic acid 、 n-pentane 、 and op-10 increasing , the density of MF foam decreases and then increases , the effect of foaming gets better and then worse ; MF foam has great flame retardant .