润滑性

  • 网络Lubricity;lubricating property;oiliness
润滑性润滑性
  1. 还可以使用NPC来改善燃料的润滑性。

    Also the NPC can be used to improve fuel lubricity .

  2. JC-1冷轧油用于五机架高速串联轧机上具有优异的轧机清净性、退火清净性以及润滑性。

    TC 1 cold rolling oil exhibits superior properties such as mill cleanliness , annealed cleaning and lubricity .

  3. OLA/TEA/LP/H2O体系的润滑性

    Lubrication of OLA / TEA / LP / H_2O System

  4. 结果表明,添加剂PA与聚合物钻井液配伍性好,不影响聚合物钻井液的流变性,提高钻井液的润滑性和膨胀抑制性。

    The result of experiment showed that additive PA had good compatibility with polymer drilling fluid .

  5. 汽油润滑性研究I.对欧洲汽油润滑性的初步考察

    STUDY ON THE LUBRICITY OF GASOLINE FUELS I A Preliminary Investigation on the Lubricity of European Gasoline Fuels

  6. 提高MoS2含量有助于改善高温自润滑性;

    The increase of MoS_2 content is beneficial to improving the high temperature self-lubricating property of the composites .

  7. 结果表明,CMC可以提高纤维之间的润滑性,减少打浆过程中纤维的过多切断,促进竹浆纤维在打浆过程中的分丝帚化。

    The results indicated that CMC acts like lubricant , and can promote fibrillation , protect the bamboo fiber from over cutting during beating process .

  8. 复合镀层的耐磨性及自润滑性优于Ni-P化学镀,而复合镀层的硬度低于化学镀层的硬度。

    Compared with ( Ni-P ) chemical coating , composition coating is ( better ) in the wear resistance and self-lubrication and lower in hardness .

  9. 在温压中(110℃)EBS蜡粉比室温下表现出更好的润滑性;

    Lubricant performance of EBS wax becomes better in warm compaction ( 110 ℃) than in cold compaction .

  10. 新型氮硫无灰添加剂的合成及润滑性考察新型储氧材料的添加对全Pd催化剂性能的改善

    SYNTHESIS OF THE NOVEL NITROGEN AND SULFUR ASHLESS ADDITIVES AND THEIR LUBRICITY Effects of the Addition of Novel Oxygen Storage Components in Pd / γ - Al_2O_3 Catalysts on the Catalytic Performance

  11. 聚四氟乙烯(PTFE)是一种热塑性塑料,有塑料王之称,具有高度的化学稳定性和优异的润滑性,是重要的防腐和减摩材料。

    As thermoplastic , polytetrafluoroethylene ( PTFE ) which is famous as " The King of Plastic " has been widely used as antiseptic and friction materials for excellent chemical stability and lubricating properties .

  12. 试验证明:所选的甲基葡萄糖甙(MEG)钻井液体系在抑制性、润滑性方面均优于聚合醇润滑防塌海水低固相钻井液体系,而且具有更好的油层保护效果。

    The experiments have shown that the selected MEG drilling fluid is better than low_solid sea water system with polyglycol in controlling well stability , lubricating performance and preventing formation damage .

  13. 评价了JAB体系在超高密度条件下的流变性、抗污染能力、抗温性、抑制性及润滑性等。

    In lab , the JAB system was evaluated on aspects of rheological characteristic , anti-pollution ability , thermal stability , inhibition and lubrication .

  14. 通过磨损试验及表面显微观察,测试并分析了(NiP)SiCPTFE化学复合镀层的耐磨性、自润滑性等摩擦性能。

    By wearing test and microtest to the surface , the wear resistance , self lubricating capacity , etc. friction properties of ( Ni P ) SiC PTFE chemical composition coating have been tested and studied .

  15. MEG是近年来利用半透膜机理优选出的一种优质处理剂,有良好的润滑性、热稳定性和页岩抑制性,无荧光、易生物降解。

    Optimized on basis of semipermeable membrane principle , MEG is a quality treating agent for drilling fluid providing excellent lubrication , thermal stability , shale inhibition , no fluorescence and easy degradation .

  16. 选择各种添加剂的基础上,根据切削工艺的要求和国家标准,选择主要的实验指标:外观、存储安定性、透明度、pH值、消泡性、表面张力、腐蚀性、润滑性。

    Select a variety of additives on the basis of the cutting process in accordance with the requirements of national standards and select key indicators of the experiment : the appearance , storage stability , transparency , pH value , anti-foaming , surface tension , corrosion resistance , lubricating property .

  17. 本文利用中频热压烧结法制备了TiC-Ni、TiC-Ni-Mo和TiC-Ni-MO-WC3种高温自润滑性金属陶瓷材料。

    TiC-Ni , TiC-Ni-Mo and TiC-Ni-Mo-WC ceramets which have high temperature self-lubricating performences were prepared using intermediate frequency induction hot-press sintering .

  18. GP-600型高润滑性硅钢轧制油的研制及工业应用

    Development and commercial application of GP-600 silicon steel rolling oil with high lubricity

  19. 采用热分析方法对WS2高温锂基脂在高温下的状态进行了分析,得出WS2粉末在800℃高温下具有良好的稳定性和润滑性。

    We analyze the situation of WS2 high temperature lubricating grease in the high temperature using the approach of heating analyze proving that WS2 powder is of good stability and lubricity under high temperature condition .

  20. 结果表明,Ni-P-PTFE-SiC复合镀层具有硬度高、自润滑性好等优点。

    The result shows Ni-P-PTFE-SiC composite coating has higher hardness , lower friction coefficient and self-lubricating , etc.

  21. 六角氮化硼(h-BN)与石墨碳类似,具有良好的润滑性、导热性及热稳定性,并且是一种非常好的电绝缘材料。

    H-BN is similar with graphite carbon , , it has good thermal stability , thermal conductivity , good lubricity . So it could be an ideal electrical insulating material .

  22. 对ARJ进行了室内性能评价,实验结果表明,ARJ具有较好的增粘性、降滤失性、抑制性及润滑性。

    The experiment results in laboratory showed that ARJ had good performance in increasing viscosity , lubricity , and inhibiting a-bility .

  23. 相同厚度的Ni-P-PTFE复合镀层耐腐蚀性比Ni-P镀层耐腐蚀性略差,但Ni-P-PTFE复合镀层自润滑性好,可用于各种橡胶模具镀层。

    The corrosion resistance of Ni-P-PTFE composite coating is slightly less than that of the same thickness Ni-P coating , but Ni-P-PTFE composite coating possesses excellent self-lubricity , which can be applied to various rubber mold coating .

  24. 在水基钻井液中,通过添加ROP增速剂来提高钻速的机理是在钻井液原有的流变性、固相含量及分散性的基础上,大大改善其润滑性,从而降低扭矩来实现的。

    The ROP enhancing agents can improve the lubrication of water base drilling fluids significantly and thus may decrease the drag and torque in drilling operations and enhance ROP while the original rheology , solid content and dispersion can be kept .

  25. 介绍了高皂化值GP-600型高润滑性硅钢轧制油的研制过程及工业应用情况。

    The development process and commercial application of GB-600 silicon steel rolling oil with high saponification value and lubricity are expounded .

  26. 室内实验评价了HRH-101的理化性能、润滑性、与钻井液的配伍性及抗污染能力,进行了加量优选。

    The property , lubricity , compatibility with drilling fluid , anti-pollution ability of HRH-101 are evaluated by experiment in lab and selected the amount of optimum addition .

  27. Ti3SiC2是一种综合性能优异的三元层状化合物,结合了金属和陶瓷的许多优良性质,具有良好的导热性、易加工性、耐腐蚀性、抗氧化性和自润滑性。

    Is a remarkable ternary layered compound with excellent comprehensive performances , which combines many best properties of both metal and ceramic , such as high thermal conductivity , good resistance to corrosion and oxidation , easy machinability and nice self-lubricating .

  28. PU/PVP半互穿网络体系的亲水润滑性研究

    Study on Hydrophilic Lubrication of Semi-Interpenetrating Network of PU / PVP

  29. 粘度指数改进剂对基础油润滑性影响研究

    Effects of VI Improver on the Lubricating Performances of Base Oil

  30. 汽油润滑性研究Ⅵ.磨损机理

    Study on the lubricity of gasoline fuels ⅵ . wear mechanism