锰合金

研究了冷却速率和硅、锰合金元素含量对Fe-C合金的包晶反应和包晶点位置的影响；

It is researched the influence of cooling rate and the content of silicon and manganese alloy on peritectic reaction and position of peritectic point in Fe-C alloy .

中国电炉锰合金的现状及发展策略

Present situation and development tactics Countermeasures of electric furnace manganese alloy in China

研究了Ca对镁锰合金显微组织和腐蚀性能的影响。

The effect of calcium on microstructure and corrosion resistance of magnesium-manganese alloy was studied .

EDTA滴定法快速测定铝锰合金中铝

Rapid determination of aluminium in Al-Mn alloy by EDTA titrimetry

ICP-AES法测定铝锰合金中的铝锰硅磷含量

Determination of Al , Mn , Si and P in Al-Mn Alloy by ICP-AES

EMD生产中钛基钛锰合金阳极的电流效率

Current Efficiency of Ti-Mn Composite Anode in the production of Electrolytic Manganese Dioxide

当镁锰合金中加入的Ca含量达到0.6%时，镁锰合金的晶粒显著细化，并且腐蚀速率下降为原来的11.8%。

Grain refinement can be greatly improved by adding 0.6 % Ca element to magnesium-manganese alloy and the corrosion rate decreases to 11.8 % .

随着锰合金、锰铁氧体等新材料的不断研发与应用，对电解金属锰的纯度要求越来越高，含Se电解金属锰产品的应用及出口已受到限制。

With the development of new materials , as magnetic materials for example , the demand for the purity of manganese have become increasingly highly , the application and export of electrolytic manganese with Se at high levels have been restricted .

以硅、锰合金化的共析钢经90%冷轧及在450℃退火30～120s后，可获得最佳的拉伸性能。

The optimal tensile properties in the alloys with Mn or Si are obtained after annealing at 450 ℃ for 30 to 120s .

201奥氏体不锈钢上17μm的铝镀层，经620℃-680℃低温热处理，可获得含铬、镍、锰合金元素的Fe-Al涂层。

After the aluminum coating of 17 μ m on 201 austenitic stainless steel is heat treated at low temperature of 620 ℃~ 680 ℃, Fe-Al coating with the alloy element of chrome , nickel will form .

硅、锰合金化耐磨锌合金的研究

Study on the Wear-resisting Zinc Alloy with Si and Mn elements

喷管的镍锰合金电铸及其开裂问题的研究

Study on Ni-Mn Alloy Electroforming of Nozzle and Its Fracture Problem

锰合金白口耐磨铸铁锤头的研究

Study of the Wear Resistance of Manganese White Cast Iron Hammer

休斯勒强铁磁性铜锰合金低镍高锰铜铝合金轴瓦新材料的研究

Low Ni High Mn Cu-Al Alloy Bush for Hot Plate Mill

介绍了锌锰合金电镀工艺的概况及研究方向。

Zinc-manganese alloy electroplating process and its researching trend were described .

镁&锰合金的腐蚀特性及其显微组织分析

The Erosion Characteristics of Magnesium-Manganese Alloy and Analysis of Micro Structure

电铸镍锰合金因其特殊的性能而具有重要的应用前景。

The electroformed Ni-Mn alloys hold good prospects for its specific performance .

测定了含铬的钛锰合金吸放氢量和压力组成等温线。

Capacity of hydrogen absorption and pressure composition isotherms have been measured .

脉冲电铸纳米晶镍锰合金的拉伸性能研究

Study on Tensile Properties of Pulse Electroformed Nanocrystalline Ni-Mn Alloy

硒酸钠对锌锰合金电沉积影响的研究

Studies on the effect of sodium selenate on electrodeposition of zinc-manganese alloy

铬锰合金铸铁的耐热性能研究

The Heat Resistance of Cr & Mn Alloy Cast Iron

锌锰合金异常共沉积的热力学条件研究

Thermodynamic Analysis of the Anomalous Co - deposition of Zn and Mn

电解二氧化锰用钛基钛锰合金全浸没板状阳极的研制

Development of Fully-immersed Slab Titanium-Base Titanium-Manganese Alloy Anode for Electrolyzing Manganese Dioxide

纳米晶镍锰合金的脉冲电铸研究

Research on the Pulse Electroforming of Nanocrystalline Ni-Mn Alloy

钛－锰合金涂层电极在下田锰矿的应用

Application of ti - Mn alloy coated electrodes in Xia Tian manganese mine

电沉积条件对钴-锰合金结构和磁性能的影响

Influence of Electroplating Conditions on the Structure and Magnetic Performance of Co-Mn Alloy

铁锰合金颗粒在底吹钢包内的运动分析

Analysis of Movement of Fe Mn Alloy Particles in a Bottom Stirred Ladle

低温熔盐电镀铝锰合金的研究

Al-Mn Alloys Electroplating Technology in Low Temperature Molten Salts

影响电沉积锌锰合金电流效率的因素

Factors Affecting the Current Efficiency in Zn-Mn Alloy Electrodeposition

镁锰合金的晶粒细化及其耐蚀性的研究

Study on Grain Refinement and the Corrosion Resistance of Magnesium - Manganese alloy