铝带

金德铝塑复合管主要包括五大原材料，分别是塑料（热水料，冷水料）、热熔胶、色母料、加工助剂、铝带。

Kinder plastic composite pipe includes five major raw materials are plastic ( hot feed , cold feed ), hot melt , masterbatch , processing aids , ribbon .

我手上的一个样本的铝带没有安装对齐，但不影响什么所以我假定它没有接触到磁体上。

One of my test samples had a misaligned ribbon , but it did not affect things so I assume it was not touching the magnets .

基于泛化回归RBF神经网络铝带厚度控制系统的辨识

Identification Based on GR-RBF NN for Thickness Control of Aluminum Strip

SiCp/Al-Si复合材料中SiC/Al界面处亚晶铝带的研究

A Study of Subgrain Al Layer of SiC / Al Interface in SiC_p / Al-Si Composites

基于SVM的铝带坯晶粒度软测量模型的研究

Research on Support Vector Machines of Soft-Sensor Measurement Model for Aluminum Strip 's Grain Fineness Number

本课题的主要目的是利用可编程序控制器（PLC）实现对铝带横切机的自动控制。

The main purpose of the thesis is to achieve auto control of the aluminum plate shear cutter with Programmable Logical Controller ( PLC ) .

基于PMAC多轴运动控制器的自动铝带绕片机数控系统设计

CNC System with PMAC-based Motion Controller for the Aluminous-Winding Machine

采用SEM和EDAX分析技术，观察和分析了铸轧铝带的表层夹杂缺陷。

The surface inclusion in cast rolling aluminum strip was observed and analyzed by means of SEM and EDAX .

本文介绍了基于PMAC多轴运动控制器的自动铝带绕片机数控系统的软硬件设计。

This paper introduces the software and hardware design of the aluminous-winding machine based on the PMAC motion controller .

本文深入分析SC气动增压泵的结构、性能和工作机理，详细介绍其在铝带铸轧机液压控制系统中的应用。

The paper analyzes the construction , performance and working principle of SC pneumatic booster pump , and introduces its application in the hydraulic system of aluminum strip casting-rolling mill .

基于PSO-BP神经网络的铝带坯晶粒度软测量建模及优化

Soft Sensor Modeling and Optimization of Aluminum Strip Grain Size Based on PSO-BP

在对分段冷却控制研究的基础上，应用ANSYS有限元软件首次系统地模拟分析了铝带轧机轧制时，影响工作辊与冷却液之间换热特性的因素。

On the base of analysis of cooling in stage , the influence on convective heat transfer between working rolls and coolant fluid of aluminum strip mill was systematically simulated with software ANSYS for the first time .

各种铝带管（nadti-portaluminumtubes）已经在汽车空调系统中得到了广泛应用，其单个通道当量管径已经小至0.5mm。

Various multi - port aluminum tubes with the diameter small to 0.5 mm are widely used in air conditioning systems .

近几年来，我国在这一行业先后建设了近十台1600mm～2400mm单机架、两机架双卷取铝带坯热轧机，2050mm六辊高速铝带冷轧机等大型设备。

In recent years , our country has built approximately ten 1600mm ~ 2400mm single or double stand double coiler hot rolling mills and six-roller high-speed double coiler cold rolling mills in total in this industry .

铝带轧机辊型设计及在轧制中的调整

Design of Roll Profile and Its Adjustment in Aluminum Strip Rolling

轧制过程中铝带塑性变形复杂。

There is the complex plastic deformation in aluminium rolling process .

另外还对轧制过程中铝带的应力和应变分布变化情况进行了探讨。

Also the Aluminium stress and strain distribution changes were discussed .

冷轧铝带厚度自动检测与控制

Automatic measure and control of the thickness of cold-roll aluminum strip

铝带坯快速铸轧新型外冷系统设计与研究

Study on External cooling system of speed-cast-rolling of Aluminium strap

截止2002年底，我国引进的各种规格的铝带冷轧机30台，其中二手的8台，它们的总生产能力806kt/a。

There were 30 introduced cold mills for aluminium rolling in China .

氧化膜铝带绕组起重电磁铁的改造

Transformation of Oxide Film Aluminium Belt Winding of Lifting Electromagnet

铝带轧制中的板形测量和控制

The Measurement and Control of Shape In the Rolling of Aluminium Strip

铝带热连轧的工艺过程自动控制

Automatic Processing Control System in Aluminium Hot Rolling Tandem Mill

铝带坯双辊铸轧过程瞬态传热数学模型

Transient heat-transfer mathematic model in twin-roll aluminum trip casting and rolling process

铝带箔轧机中对流换热特性影响因素的数值模拟

The Simulation of Influence on Convective Heat Transfer in Aluminum Strip Mill

本文介绍了熨平辊设计的特点和在高速铝带轧机上的应用。

Solutions for stability of ironing roll for high speed foil mill ;

铝带卷生产中直流电机张力控制系统的转矩补偿分析

Torque Compensation Analysis of DC Motor Control System for Aluminium Strip Production

铝带不可逆冷轧机卷取传动设计与计算

The Design of Coiler Driver for Aluminium Strip Non-Reversing Cold Rolling Mill

铝带坯铸轧机循环冷却水系统分析

Analysis of Circulating Cooling Water System for Aluminium Strip Caster

国外现代铝带冷轧机和国产先进冷轧机

Modern Aluminium Cold Mills Abroad and the Advanced Ones Made in China