铝黄铜

测定了HAl77-2铝黄铜、BFe30-1-1白铜在3.5%NaCI和3.5%NaCI+S~（2-）溶液中的腐蚀速率、腐蚀磨损率和电化学行为；

The corrosion rate , corrosive were rate and polarization curves of aluminium brass and cupronickel alloy were determined in 3.5 % NaCl and 3.5 % NaCl + S2 - solutions .

硼对HAl77－2铝黄铜组织和腐蚀性能的影响

Effect of Boron on Microstructure and corrosion resistance of aluminium brass

铁铝黄铜中的Fe3Al沉淀

Fe_3al precipitates in iron-alumunium brass

用离子探针（SIMS）分析了铝黄铜表面膜的组成和深度分布.结果表明：表面膜中富集Zn、AI、B；

The composition and elements depth distribu-tion of surface film were analyzed by SIMS . The results show that the content of Zn , Al , B in surface film is more than that in matrix ;

稀土铝黄铜合金在NaCl+NH4Cl腐蚀液中的腐蚀行为

Study on corrosion behavior of rare-earth aluminum brass in NaCl + NH_4Cl solution

测定了成膜前后加硼HA177-2铝黄铜的静态腐蚀速率、脱锌系数和电化学行为。

The corrosion rate , dezincification coefficient and polarization curves of boron modified HA177-2 brass with and without surface film were measured ;

采用ICP，XRD，EMPA，PAT等方法研究了加硼对铝黄铜脱锌行为的影响和机理。

The role of boron in inhibiting dezincification of aluminium brass was investigated by ICP , XRD , EMPA and PAT methods . By adding trace boron into aluminium brass with or without arsenic , the resistance of the brass against this type of selective corrosion could be remarkably improved .

铝黄铜止推轴承座是发动机涡轮增压器的重要组成部件，其质量优劣直接影响涡轮增压器的性能和寿命。

Aluminum Brass Thrust Bearing Blocks are important component parts in turbocharger .

硼抑制铝黄铜脱锌机理的研究

Role of boron in inhibiting dezincification of aluminium brass

HAI60-1-1铝黄铜止推轴承座精密成形研究

Study on the Precision Forming of HAI 60-1-1 Aluminum Brass Thrust Bearing Blocks

滑动轴承用复杂铝黄铜耐磨性能研究

Wear Resistance of Aluminum - brass for Bearing

高强耐磨复杂铝黄铜研究

Wear Resistant Complex Al-brass with High Strength

结果表明，在铝黄铜中加入微量硼，能提高合金抵抗这类选择性腐蚀的能力；

By adding trace boron into aluminium brass with or without arsenic , the resistance of the brass against this type of selective corrosion could be remarkably improved .

该课题最终实现了用挤压技术成形铝黄铜止推轴承座的目的，大大提高了该产品质量、节约了原材料，降低了生产成本。

This paper achieved the purpose to form the Aluminum Brass Thrust Bearing Blocks by the extrusion process . This process can greatly improve the product quality and saving raw materials and reduce costs .

本文研究的铜合金是一种复杂铝黄铜，其抗粘着磨损性能优良，成型工艺简单，克服了钢模与被拉零件产生粘着而擦伤零件表面等弊端，弥补了钢模的不足。

The copper alloy reported here is a kind of complex aluminium-brass with excellent adhesive-abrasion resistance . The forming process is simple , overcoming the shortcomings , such as the surface abrasion of a part caused by the adhesion between the steel die and the part being drawn .

运用本系统测量了埋地金属板材（A3钢、铝、黄铜及1Cr18Ni9Ti）的庸蚀电流及土壤的地温、电导、电阻率等理化性质随时间的变化规律，并探讨了它们之间的相互影响。

The corrosion behavior of A3 steel , stainless steel ( lCrl8Ni9Ti ), aluminum and brass were studied by means of it . Also , the underground temperature , resistivity and conductance of soil were determined at the same time .

应该避免使用铝、黄铜和铜。

Aluminum , brass , and copper should be avoided .

铝锰黄铜中铁的宏观偏析的形成与防止

Forming and Preventing of Iron Macrosegregation for Al-Mn Brass

推荐用于所有金属，包括不锈钢，如铝，黄铜，铜软金属。

Recommended for all metals , including stainless steel and soft metals such as aluminum , brass and copper .

抛光：珠宝、铝、黄铜、铜、钢、不锈钢、压铸件，塑胶漆面，木头。

B. For coloring : jewelery , aluminium , brass , copper , steel , stainless steel , die casting , plastic , lacquer , wood .

钎焊业务：广泛应用于汽车、航空、航天、家电等行业的不锈钢、碳钢、铝、黄铜、紫铜等零部件的钎焊。

Brazing of business : widely used in automotive , aviation , spaceflight , home electrical appliances industry of stainless steel , carbon steel , aluminum , brass , copper etc parts brazing .

电解沉积铝层与黄铜基体力学性能

The Force Bahavior of the Deposited Aluminium Coating and Brass Substrate in Abrasion

采用正交试验，确定了铝镍复杂黄铜防爆弹性合金的化学成分，并试验了冷挤压变形对合金性能的影响。

The components of aluminium-nickel-brass explosion-preventive spring alloy were determined by orthogonal design and the effects of cold-extrusion deformation on alloy function .

渗铝后的黄铜耐蚀性提高1.8倍，硬度增加25.6%，渗层厚度为50μm。

After aluminising , The corrosion resistance of brass increases 1.8 times , the hardness increases 25.6 % and the coating thickness is 50 μ m.

金属毛刷类比粗糙的金属表面，如毛刷拉过的铝和磨光的黄铜。

Brushed Metal simulates textured metal surfaces such as brushed aluminum and polished brass .

公司产品以碳钢（占77%）为主，其附属产品包括不锈钢、铝、红铜和黄铜。

Their primary product is carbon steel ( 77 % ) followed by stainless , aluminum , and copper & brass .

铝，青铜，黄铜，以及不锈钢是在加工时就上过的，但是必须保护好以免在加工中损坏。

Aluminum , bronze , brass , and stainless steel have factory-applied finishes , but have to be protected from damage on the job site .

实验评价了几种商品气相缓蚀剂和一种自制缓蚀剂对碳钢、铝、铜、黄铜等在海洋大气环境中的缓蚀性能。

Several commercial and one prepared in laboratory inhibitors against corrosion in ocean atmosphere of carbon steel , aluminum , copper and brass are investigated experimentally .