钢管公司

  • 网络Steel Pipe Company;Wheatland Tube
钢管公司钢管公司
  1. 天津钢管公司生产的石油套管采用NDT全自动100%探伤。

    The petroleum Casing made in Tianjin Pipe Corporation is inspected with NDT automatically by 100 % .

  2. 天津钢管公司150tEAF-LF/VD-CC工艺实践

    Practice on 150 t EAF-LF / VD-CC Process at Tianjin Pipe Company

  3. 叙述了天津钢管公司220kV总降压变电站33kV系统设备运行的概况。

    The general situation of 33 kV system equipments for 220 kV general stepdown substation in Tianjin Pipe Corporation is described .

  4. 简述天津钢管公司φ250限动芯棒连轧机组生产20G高压锅炉管的工艺和质量状况。

    This paper introduces the situation of technology and quality of the 20G high pressure boiler tube produced by φ 250 retained mandrel continuous rolling mills in Tianjin Pipe Corporation .

  5. 最后,本文结合SJ钢管公司预算管理实际运用案例,对其预算管理现状进行分析,指出其预算管理存在的问题。

    Finally , combined with the budget management case of SJ Steel Company , by analysing its present situation of budget management , pointed out the problems existed in budget management .

  6. 介绍衡阳钢管公司φ150mm水平连铸圆管坯的开发方案、生产工艺及铸坯质量。

    The paper describes the development , process and quality of horizontal casting for φ 150mm round blank at Hengyang Steel Pipe Group Co. , Ltd.

  7. 对天津钢管公司由德国LOI公司总承包设计建造的φ33.25m环形炉设计特点做了分析。

    The designing characteristics of φ 33.25m ring heating furnace which is designed and built by LOI Company in TPCO is analyzed .

  8. 天津钢管公司在150t超高功率电弧炉上采用顶渣吹氩搅拌法成功地生产出超低硫管线钢。

    In Tianjin steelpipe comany , the ultra low sulphur pipeline steel is successfully produced by applying top slag Ar bubbling in a 150t electric arc furnace with a super high powder .

  9. 天津钢管公司φ250限动芯棒连轧机组浅述介绍了天津钢管公司轧管厂Φ250mm限动芯棒连轧管机组热轧20G高压锅炉管的在线常化工艺。

    The co-authors introduce the on-line normalizing process for Grade 20G high-pressure boiler pipes hot - rolled with the φ 250mm retained mandrel mill line at Tube-rolling Plant , Tianjin Steel Tube Corp.

  10. 把SAPF应用于天津钢管公司配电系统中,针对特定负荷的实用化问题进行分析,包括主电路的选择,参数设计等等。

    Tianjin Pipe Corporation SAPF used to distribution power systems , load-specific analysis of the practical issues , including the choice of the main circuit , parameter design and so on .

  11. 天津钢管公司还原铁厂针对DRI回转窑出料系统在设计上存在的明显的缺陷,对出料系统进行改造,有效地提高了回转窑的作业率及产量,降低了工人的劳动强度。

    In view of the evident defects existed in the design of discharging system of rotary kiln in DRI Plant of TPCO the discharging system is modified to improve efficiently the working rate and yield and reduce the working strength .

  12. 天津钢管公司炼钢厂150t超高功率电炉用国产优质镁炭砖后,平均寿命达220炉,炉衬工作层单耗为1.36kg/t。

    A home-made high quality MgO - C brick in 150t UHP EAF in Tianjin Steel Pipe Company has achieved an average life of 220 heats and the working lining consumption of 1 . 36kg / t steel .

  13. 本文以天津钢管公司(TPCO)为例,对大客户管理(重点客户管理)的高级阶段&建立客户联盟的运作模式进行了研究。

    Taking Tianjin Pipe Corporation ( TPCO ) as an example , this thesis makes a study on advanced stage of major customer management , i.e. the operation patterns of establishing customer intimacy .

  14. 通过分析天津钢管公司炼钢厂Φ210mm断面圆坯连铸工艺特点,提出了适合于该断面结晶器保护渣的性能要求。

    By analysing the casting characteristic of round billet φ 210 mm section in Steel - making Plant of Tianjin Pipe Corporation , the requirement suitable to property of crystallizer flux powder of the round billet section is put forward .

  15. 珠江钢管公司在发展中崛起

    Zhujiang Steel Pipe Co. Ltd. ( PCK ): rising by development

  16. 天津钢管公司乳化液循环使用处理装置的研制

    Development of device for recycling emulsion in Tianjin steel pipe company

  17. 天津钢管公司独特的高架式储管运输系统

    Tne unique pipe storing and handling system at Tianjin Pipe Corporation

  18. 天津钢管公司对电弧炉和连铸机进行了高效化改造,通过优化中间包参数,解决了高拉速下连铸圆坯钢液的纯净度问题;

    Purity problem of round billet steel was solved by optimizing parameter of tundish .

  19. 华油钢管公司人力资源管理系统改革与设计研究

    Study on the Reform and Design of HRM System of Steel Pipe Corporation of North China Petroleum

  20. 西班牙挤压成型钢管公司采用热挤压工艺成功地生产出双金属无缝钢管。

    The bimetallic seamless steel pipes are successfully manufactured with a hot-extrusion process in Tubacex , Spain .

  21. 对钢管公司的整个运输系统特点作了详尽的论述。

    At the same time , it approaches the characteristic of whole transportation system for Pipe Corporation .

  22. 天津钢管公司炼钢厂1~除尘反吸系统改造及袋式除尘分析

    Modification of 1 ~ # Dedusting Back Absorption System and Sack Dedusting Analysis in Steelmaking Plant of TPCO

  23. 阐述了钢管公司精整线中测量系统的作用和基本功能;

    This paper introduce the effect and basic function of the measure system in the pipe corporation fine machining product line .

  24. 天津钢管公司150tVD真空脱气处理设备是我国新引进的最大的钢液脱气处理设备。

    The 150 t vaccum degassing equipment recently imported by Tianjin steel pipe company is the biggest molten steel degassing equipment in our country .

  25. 中间仓库是天津钢管公司生产工艺中由轧管向管加工输送钢管的一座自动化立体中间过度仓库。

    Intermediate storage is a solid automatic three-dimensional intermediate storage between steel pipe mill and pipe finishing plant production process in Tianjing Steel Pipe Co.

  26. 概略介绍了美国普利茅斯钢管公司所属八个钢管车间的情况,重点介绍了该公司新建的狄塞尔轧管车间情况。

    Brief descriptions are given to eight steel tube workshops in Plymouth Steel Pipe Corporation US , especially to a newly constructed Diescher mill workshop of the corporation .

  27. 将天津钢管公司套管与日本同类优质套管分别从几何尺寸、制管材料的理化性能及套管实体的使用性能等方面进行了对比分析。

    Quality of oil casing produced in Tianjin Pipe Corporation is analysed and compared with same kind produced in Japan in aspects of size , manufacturing materials , physiochemical property and utilization property .

  28. 太原钢铁集团公司和成都无缝钢管公司双方利用各自装备优势,通过合作解决了生产大口径不锈钢冷拔无缝钢管的关键&大型不锈钢管坯和热穿孔。

    Used each superior equipment and both solved the key of large-sized stainless steel cold-drawn seamless tube-large-sized stainless tube blank and hot-piercing by Taiyuan I & S Co. Ltd. and Chengdu seamless steel tube Co.

  29. 与欧洲钢管公司类似产品实物质量指标进行了对比,对相应钢板和钢管标准提出了改进建议。

    Compared the quality index of finished pipes of Europe Pipe Co 's similar products with that of the above mentioned pipe and put forward improved suggestion to the related plate and pipe 's specification .

  30. 文章阐述了提高产品质量、开发新产品、技术改造与企业发展的关系,介绍了天津钢管公司在技术改造方面的成绩及对公司的发展所起的作用。

    The relation of products quality improvement , new product development and technical transformation to enterprise advance is described , and the achievement of technical transformation and its effect on Tianjin Pipe Corporation are introduced .