钢水包

ɡānɡ shuǐ bāo
  • steel ladle
钢水包钢水包
  1. 150t钢水罐是板坯连铸机的主要配套设备,耳轴板的连接处是其主要受力部位,需要承受包括钢水包及包内所装钢水的负荷,承受的主要是弯曲力和剪应力。

    T steel water pitcher is the main equipped device of the sheet billet continuous casting machine . The connecting part of the trunnion plate bears the main bending and shearing forces , including the load of the steel ladle and the steel water in it .

  2. 快速颠倒钢水包从包里倒出熔渣。

    Quick reverse tilt the ladle to remove slag from the pouring spout .

  3. 慢慢地倾斜钢水包,铁水流速稳定可控。

    Tilt the ladle slowly to provide constant controlled flow of molten iron .

  4. 介绍了连铸机钢水包承载用新型设备钢包车的功能、主要技术参数及结构特点。

    Here is an introduction to the function , main technical parameters and structure features of ladle cara new carrier for caster ladle .

  5. 本文讨论了起升140吨钢水包、钢锭等物料用的冶金起重机的卷筒的铸造工艺。

    This paper discussed the casting technique of the winding barrel used on metallurgical crane of 140 ton capacity for lifting and transferring spout ladle or ingots etc.

  6. 不仅为产品的设计定型提供了可靠依据,而且该钢水包的设计成功对国内冶金行业偏于保守的设计思想也是一个很大的启发。

    Not only providing the trusty bases for finalized the design of the ladle but the succeed of this ladle giving a prodigious illumination to the conservative design ideas in domestic metallurgy industry .

  7. 通过钢包回转台的传送,使炼钢跨的钢液能够连续地传送到连铸机的浇注位置,并快速地进行钢水包重包与空包的更换。

    Through the transfer of ladle turret , the steel span steel liquid can be continuously transmitted to the pouring position of continuous casting machine , and quickly perform replacement of ladle heavy bag and empty package .

  8. 介绍根据安钢三炼钢条件进行的钢水中间包流场水力模型实验及其应用。

    This paper introduces water model experiments of molten steel flow field in tundish and its practical application .

  9. 主要研究了如何通过设置堰、坝来促进夹杂物上浮、减小中间包内死区比率,使钢水在中间包内的停留时间延长50%。

    By the setting of dam and wall , the resident time of steel in tundish increased more than 50 % .

  10. 钢水在中间包内温降的数学模型电炉出钢过程温降规律的研究

    Mathematical Model of Temperature Drop of Molten Steel in Tundish Study on Law of Temperature Drop During Tapping from Electric Arc Furnace

  11. 吹炼完毕,在钢液中加进添加剂调整成分,钢水倒入钢水包。

    When the blow is completed , the composition is adjusted by additions to the melt , and the steel is poured into a ladle .

  12. 通过对某厂板坯连铸中间包进行控流装置优化的水模实验,发现原中间包结构造成钢水在中间包内的最小停留时间过短,死区体积大;

    The flow control devices in the tundish of slab continuous caster in No. 3 steelworks in Angang were studied and optimized with water model experiments .

  13. 针对攀钢六流大方坯连铸中间包,采用等温和非等温物理模拟的研究方法,研究了钢水在中间包内的流动规律。

    The flow pattern of molten steel in tundish of the 6-strand bloom caster at PZH Steel were investigated by physical simulation with isothermal and non-isothermal model .

  14. 认为采用气幕挡墙可有效延长钢水在中包的平均停留时间,降低死区,混匀钢水;

    It shows that adopting the gas curtain can lengthen the average residence time of molten steel in tundish , reduce dead volume and enhance mixture degrees of liquid steel .

  15. 本实用新型钢水冶炼中间包盖板的开孔处都装有耐火纤维复合材料制成的护圈,能承受较大的热变形。

    The molten steel smelting tundish cover plate is provided with a guard ring made of fire-resistant fiber composite material is arranged at the opening and can withstand greater thermal deformation ;

  16. 对中间包稳流器在德马克连铸机上的应用情况进行了研究,分析了其对钢液流动状态和钢水在中间包内平均停留时间的影响。

    The application situation of tundish current regulator in Demark continuous caster is studied and the influence of it on liquid steel flow state and the average time of liquid steel stopping in tundish are analyzed .

  17. 钢水车无动力时,可用起重机吊钩倾斜,传递,旋转钢水包。

    Tilt , transfer , and rotate the ladle to align with crane hooks in the event of a power failure .