金属材料

介绍了一个超媒体《金属材料及热处理》教学CAI软件。

This paper introduce a hypermedia CAI software for 《 Metal Material and Heat Treatment 》 .

金属材料ICP-AES分析中基体干扰及校正技术

Matrix Interferences and Their Correction Methods in ICP-AES Analysis of Metal Material

“电子回收”指的是回收使用过的或者被丢弃的电子设备中的部件或金属材料。

Ecycling is the process of recycling the components1 or metals contained in used or discarded electronic equipment .

太阳P模振动理论的研究金属材料振动拉伸的实验

Theory of Solar P-mode Oscillation Experimental Research of Vibration Drawing of Metals

金属材料X射线散射比的测定

The Measurement of Scattering Ratio of X - ray for Metal Materials

离子注N对人体用金属材料在人工模拟体液中的阳极极化行为的影响

Effect of N-ion Implantation on the Anodic Polarization Behavior of Surgery Medical Materials in Artificial Body Fluid

土壤pH和Eh对金属材料腐蚀的影响

Effect of soil pH and eh on Corrosion of metal materials

针对纳米晶（NC）单质金属材料的腐蚀特性，研究了块体纳米晶铜的耐蚀性能。

To examine the corrosion performance of pure nanocrystalline ( NC ) metal , the corrosion behaviors of NC copper bulk was investigated .

ICP-AES在有色金属材料中的应用

Application of ICP-AES in Nonferrous Metals

分析表明：这种K（IC）测试法不宜用于这些延性金属材料。

The analysis shows that the measurement method of K_ ( IC ) is not suitable for the measurement of fracture toughness of these ductile metallic materials .

除了在常规掺杂衬底Si上制备外，在相对高电导率的Ta、Ti、Nb等金属材料上亦沉积成功金刚石薄膜。

Besides high doped Si , diamond was successfully deposited on metal substrates with relatively high conductivity such as Ta , Ti , Nb by CVD method .

采用运动硬化法则，描述了金属材料在循环载荷作用下的Bauschinger效应。

Kinematic hardening rule was used to account for the Bauschinger effect of metal under cyclic loading .

当镁合金替换原有的车用金属材料后，必将影响整车的NVH性能。

If original automotive metal materials are replaced by magnesium alloy , the vehicle NVH performance must be affected .

采用异方差回归分析理论，建立一种SN曲线和PSN曲线小子样测试方法，可以对金属材料中寿命区的SN曲线和PSN曲线进行散点测试。

Based on the heteroscedastic regression analysis theory , a small sample test method for S N and P S N curves is established , which can obtain S N and P S N curves of metal materials by scattered test .

应用高速摄影技术研究电火花线切割加工（WEDM）放电、热蚀、气泡运动和金属材料的抛出过程，并对线切割加工放电的过程进行了描述。

The Paper presents the processes of corrosion , bubble movement and vaporization of metals in WEDM by using high speed photography , and also describes the process of electric discharge in WEDM .

研究了一种CO2激光表面硬化预涂层用的涂料，并将之用于凸轮轴等金属材料的激光表面硬化处理，检测了硬化层的热穿透深度、硬度、表面粗糙度等。

A kind of coating used in the pretreatment coating of CO 2 laser surface modification is studied . The thermal penetration depth , hardness and surface coarseness of the hardened layer have been examined with the coating used in laser surface hardening treatment .

利用高频超声波（10～125MHz）技术可对金属材料整个体积进行非金属夹杂物的无损检测。

High-frequency ultrasonic ( 10 ~ 125MHz ) technology could be used to the inspection of nonmetallic inclusion in metal material on the whole volume .

依据Lemaitre损伤演化模型，建立了裂尖塑性区内损伤材料的损伤演化，并对金属材料裂纹尖端损伤以及弹塑性断裂有关特征量的影响进行了分析。

The damage evolution for damage material in the plastic area of crack tip is deduced on the basis of Lemaitre 's model of damage evolution . The characteristic measures about elastic-plastic fracture for damage at crack tip of metals material are analysised .

金属材料仓储计算机管理程序的编制与应用

Programming and application of computer management for storage of metal materials

用非晶态合金层使金属材料表面改性

Surface Modification of Metals with the Formation of Amorphous Alloy Layers

金属材料工程专业学生素质教育影响因素研究

A Study of the Quality-oriented Education of Metal Material Engineering Students

金属材料课程教学中理论与实践相结合的教学探索

On Combining Theory with Practice in Teaching of Metallic Materials Course

金属材料塑性变形过程中细观结构演化的几何描述

Geometric simulation of meso-structure evolution of metal material in plastic deformation

无机非金属材料发展的新趋势及其影响无机层状矿物/聚合物高吸水性复合材料

Progress on inorganic layered mineral s / polymer super absorbent composite

介质性质对金属材料电化学腐蚀的影响

Influences of medium property on the electrochemical corrosion of metal materials

同步辐射及其在稀有金属材料研究中的应用

Synchronous Radiation and Its Application in the Studying of Less-Common Metal Materials

金属材料流动应力模型对有限元仿真结果的影响

A Influence of the Metal Flow Stress Model to FEM Numerical Simulation

半导体微电子技术用贵金属材料的应用与发展

Application and Development of Precious Metal Materials for Semiconductor-microelectronic Technology

拉伸试验力学性能项目符号与内容的变化&解读新版GB/T228-2002金属材料室温拉伸试验方法

Symbol and Content Changes of Mechanical Property after Tensile Testing

金属材料拉伸和压缩过程的有限元模拟

Simulation of metal elongation and compress process by the elastic plastic FEM