表面喷涂

表面喷涂技术可以修复FRP产品的表面缺陷，美化产品外观。

This paper describes the surface spray technology for FRP products .

采用火焰喷涂技术对基体金属表面喷涂Al2O3陶瓷。

Flame spraying technique was employed to spay Al2O3 ceramic coating on metallic surface .

FRP产品的表面喷涂技术

Surface spray technology for FRP products

利用等离子喷涂方法在聚酰亚胺基复合材料表面喷涂金属防护层，涂层材料分别采用Al、Cu、Zn和Ni。

Metal coating was made on polymer matrix composite substrate by plasma spraying , and coating material was Al , Cu , Zn and Ni .

HA涂层方法能够促进骨组织长入及增强骨-植入体界面结合强度，并在中晚期有一定的优势，因此表面喷涂HA是一种促进骨与假体界面结合的好方法。

HA coating is also an effective method of prosthesis surface treatment to improve bone ingrowth and enhance the interface shear strength .

牙轮钻头金属密封环表面喷涂WC-Co涂层耐磨性研究

Wear-resistant Properties of Plasma Sprayed WC-Co Coating On the Roller Bit Metal Seal Ring Surface

介绍了用氧乙炔火焰在铜材表面喷涂Al2O3基复合耐热涂层的新方法&倾斜过渡和重熔。

A new process , slope transition and remelting used for spraying Al_2O_3 composite heat resistant layer on the surface of copper materials with oxyacetylene flam has been introduced .

探头是直径75mm、高82mm的几乎是圆筒形结构的塑料闪烁体，表面喷涂ZnS（Ag）。

A plastic scintillator ST-401 almost cylindrical in form is used as the detector . It is 82 mm high and 75 mm in diameter and zinc-sulphide is covered on the detector surface .

结论P19具有成骨活性，可复合HA修复骨缺损和用于HA表面喷涂假体的生物活性修饰成分。

Conclusion The results are showed that the P19 with osteogenous activity , can be used in the area of hydroxyapatite based materials for repairing bone defect and coating on HA prosthesis as a modification element with biological activity .

本文通过电弧喷涂的方法，在船舶用钢A36表面喷涂锌、铝涂层，采用极化曲线和电化学阻抗谱等电化学方法，研究了在模拟海水溶液中，浸泡时间对锌、铝涂层耐蚀性的影响。

The effect of immersing time on corrosion performance of zinc coating and aluminum coating were studied by polarization curve and EIS .

采用等离子喷涂工艺在炭/炭复合材料表面喷涂成型了0.8～1mm厚的钨涂层和含有0.03～0.08mm钽中间涂层的钨涂层。

Tungsten coatings of 0.8 ~ 1mm thickness , uncontaining and containing 0.03 ~ 0.08 tantalum intermediate coatings , are successfully deposited by plasma spraying technique on carbon carbon composites . Coatings are investigated by SEM and metalloscope .

开发了一种RE-Fe-Ni-Cr粉末冶金材料，采用等离子喷涂方法在水泥混凝土泵缸套表面喷涂该合金粉末，分析了该合金的组织结构，以及稀土元素含量对耐磨性的影响。

A sort of P / M RE-Fe-Ni-Cr used in cylinder liner of cement concrete pump is developed , A coating consisting of RE-Fe-Ni-Cr is formed on the cylinder liner surface of cement concrete pump by plasma spraying .

灰铸铁表面喷涂WC/Co涂层的磨损特性研究

Wear Characteristics of WC / Co - Sprayed Surface of Gray Iron

电爆技术用于超细粉制备和表面喷涂的研究进展

Progress in Ultra-fine Powders Preparation and Spray Coating Using Electrical Explosion Method

导卫板失效分析及表面喷涂层的耐磨性能

Failure Analysis of Guide Piece and Wear Resistance of the Thermal Sprayed Coating

复合材料零件表面喷涂铝涂层工艺

Technology for Spraying the Aluminium Coating on the Part Surface of Composite Material

瓦楞辊表面喷涂硬质涂层耐磨性研究

Study on Wear Resistance Behaviors of Hardening Coatings Sprayed on Corrugating Rolls Surface

采用冷喷涂技术在不锈钢表面喷涂纯铜涂层；

The copper coatings were prepared on stainless steel surface by cold spraying .

混凝土面板坝表面喷涂聚脲防护试验研究

Protective experimental research on spray polyurea on concrete faced rock fill dam surface

表面喷涂氟塑料中空间电荷分析

Space charge analysis of fluoroplastics after surface coating

采用表面喷涂法生产抗菌纸的研究

The Making of Antibacterial Paper by Surface Spraying

显示屏内表面喷涂机控制系统的应用研究

Research on Application of the Control System for Spraying Machine for Inner Surface of Kinescope

外形材质具有不锈钢板和防腐蚀表面喷涂板两种材质可选；

The surface material can be made by stainless steel plate or anti-corrosion surface-spraying plate ;

塑料制品表面喷涂关键技术

Key Surface Spraying Techniques for Plastic Products

根据您的要求的颜色对积分球外表面喷涂。

We can according to your request for the colour to spray-paint the surface of sphere .

喷涂聚氨酯（脲）弹性体的研究混凝土大坝表面喷涂聚氨酯保温保湿试验

Experimental study on thermal insulation and moisture holding of concrete dams by spraying polyurethane on surface

介绍了基体采用45钢，表面喷涂工程陶瓷的旋塞阀芯的研制情况。

The development of the ceramic coat plug valve core which substrate uses 45 steel is introduced .

关于利用电爆炸技术进行表面喷涂的研究，除日本外未曾见到其他报道。

Excepting Japan , it has not been reported on the research of the electrothermal explosion spraying technology .

选择不同的喷涂工艺参数，在镁合金表面喷涂铝锌丝材。

Different technological parameters of electric-arc spraying aluminum and zinc on the surface of magnesium alloy samples were selected .

熔缸内层表面喷涂特氟龙防粘涂层以防止炭化，减少堵塞；

There is a layer of Teflon coat on th surface of melting jar to avoid carbonization and lesson blockage .