聚甲基硅氧烷

用单体乳液滴加法合成了高含氢聚甲基硅氧烷/聚丙烯酸酯共聚乳液，TEM照片显示乳胶粒子为核壳型结构；

Polymethylsiloxane / polyacrylate copolymer emulsion was synthesized by a drop-adding monomer emulsion method . The TEM photos demonstrate the core-shell structure of latex particles .

采用羟基树脂通过TDI对聚甲基硅氧烷进行化学改性，用红外光谱、热重分析等手段对改性产物进行了表征。

Hydroxyl resin is used to modify polymethylsiloxane through the action of TDI and the products are characterized by IR and TGA .

合成了含氢聚甲基硅氧烷（PHMS）醋酸乙烯酯（VAc）羟甲基丙烯酰胺（NMA）复合乳液，研究了聚合方法、乳化剂配比及用量对乳液的粒径、粘度、表面张力及存放稳定性的影响。

Synthesized the PHMS / VAc composite emulsion , studied the effect of polymerization method , emulsifier formula and amount on particle size , viscosity , surface tension and storage stability .

采用水解-缩聚两步法以甲基三甲氧基硅烷（MTMS）为原料制备微米级聚甲基硅氧烷微球，粒径为1~15μm，粒径分布较窄；

Polysiloxane microspheres were prepared by the sol-gel polymerization method from methyltrimethoxysilane ( MTMS ) . The particle size is from 1 μ m to 15 μ m and the size distribution is narrow ( C.V. )

通过对羟基封端聚甲基硅氧烷的预聚，提高了树脂基体的粘度；

The risen viscosity was increased by prepolymerizing hydroxyl-terminated polydimethyl siloxane ;

结果表明所得到的梯形聚甲基硅氧烷具有较高规整性。

The data show that the polymer has ordered ladderlike molecular structure .

激光溅射下聚甲基硅氧烷的结构重组

Restructuring of Siloxane by Laser Ablating

再与低含氢硅油进行硅氢加成反应，合成出环氧聚醚改性聚甲基硅氧烷；

It was then reacted with low hydrogen containing silicone oil via hydrosilylation to produce epoxy-containing polyether silicone .

高含氢聚甲基硅氧烷改性聚丙烯酸酯乳液的研究&（Ⅱ）原料配比对乳液稳定性的影响

Studies on the modification polyacrylate emulsions with high hydrogen-containing polymethylsiloxan & (ⅱ) influence of raw material composition upon emulsion stability

含氢聚甲基硅氧烷/聚丙烯酸酯复合乳液研究Ⅰ.复合乳液的制备及其性能

Studies on hydrogen containing poly ( methyl siloxane ) / polyacrylate composite latexes ⅰ . preparation and some properties of the composite latexes

纳米SiO2填充聚二甲基硅氧烷的微观结构在热贮存中的演变动力学

Microstructure evolution kinetics of polydimethylsiloxane filled with nano-SiO_2 composites during thermal annealing

硅氢加成型室温固化硅橡胶胶粘剂的研究聚二甲基硅氧烷结构的~1HNMR研究和硅氢、硅羟基含量的测定

Study of structure of polydimethylsiloxanes and determination of hydrogen and hydroxyl bonded to silicone by Fourier transform ~ 1h NMR

该传感新方法是在一块氧化铟锡导电玻璃-聚二甲基硅氧烷（ITO导电玻璃-PDMS）芯片上开展的。

This novel approach was performed on a indium tin oxide glass-poly ( dimethylsioxane )( ITO glass-PDMS ) microchip .

利用该硅模具成功复制出聚二甲基硅氧烷（PDMS）微米级纤维阵列。

The polydimethylsiloxane ( PDMS ) microfiber arrays were successfully replicated from the silicon mold .

为了使聚二甲基硅氧烷（PDMS）具有较稳定的亲水性表面，利用氧等离子体技术对PDMS表面进行处理。

Oxygen plasma technology was applied to obtain the hydrophilic poly ( dimethylsiloxane )( PDMS ) surface .

同时证实了木醋杆菌可在PDMS（聚二甲基硅氧烷）制作的微流控芯片中良好的生长，表明通过微流控芯片可调控纤维素的定向排列。

It was also confirmed that the acetobacter xylinum can grow well in the micro-fluidic chip made of PDMS .

芯片由玻璃片作模具，聚二甲基硅氧烷（PDMS）为基质。

The chip consisted of glass substrate and polydimethylsiloxane ( PDMS ) membrane in which the channel for protein digestion existed .

对玻璃和聚二甲基硅氧烷（PDMS）制成的矩形微流道中电渗流（EOF）的温度场进行了数值模拟研究。

Joule heating effect of the temperature fields during electroosmosis in glass and polydimethylsiloxane ( PDMS ) rectangular microchannels is numerically investigated .

以氟钛酸钾和氨乙基氨丙基聚二甲基硅氧烷（AEAPS）为整理剂，对羊毛产品进行阻燃整理，使其具有阻燃的性能和柔软的手感等多重功能。

In this paper , as finishing agents , potassium fluotitanate and aminoethylaminopropyl polydimethylsiloxane ( AEAPS ) were used on the wool product to attain flame retardant property and soft feeling .

结合乙醇、乙酸对聚二甲基硅氧烷（PDMS）膜的溶胀特性差别，分析并讨论了两者在渗透汽化过程中可能的分离机理。

The swelling properties of PDMS membrane in ethanol and acetic acid were also examined for exploring the possible separation mechanism in the pervaporation process .

聚二甲基硅氧烷（PDMS）具有极低的表面能、良好的低温柔韧性和热稳定性，能显著改善环氧树脂的疏水性、韧性及耐高低温性能，是改性环氧树脂的理想材料。

Polydimethylsiloxane ( PDMS ) was used as an ideal modifier in epoxy resin because of its low surface energy , excellent flexibility and thermal stability .

以超精密车削技术在铝合金样品表面上加工的条纹图形，经复制模铸得到了聚二甲基硅氧烷（PDMS）基底表面上的反相结构。

The ultra-precision turning technique was used to fabricate striped patterns on Al alloy samples which serve as hard masters to replicate reverse patterns in PDMS substrate surface .

采用旋转异构态模型，用MonteCarlo方法计算了聚二甲基硅氧烷（Polydimethylsiloxane）链考虑侧基（CH3）的均方通转半径。

The mean-square radius of gyration of polydimethylsiloxane chains , considering the effect of side group , is investigated by using Monte Carlo simulation and the rotational isomeric state model .

以末端基为羟基的聚二甲基硅氧烷（PDMS）与聚四甲基醚二醇（PTMG）为混合软段合成出一系列含硅氧烷的聚氨酯弹性体。

A series of siloxane-containing polyurethanes were synthesized using polytetramethylene ether glycol ( PTMG ) and hydroxyl terminated polydimethylsiloxane ( PDMS ) as mixed soft segments .

在此研究中，毛细管色谱柱制备采用的固定相是端羟基聚二甲基硅氧烷，石英毛细管尺寸：8m×250μmi.d。

In this research , the stationary phase of the sol-gel capillary column is hydroxy-terminated poly ( dimethylsiloxane ) . Dimension of the capillary column : 8m × 250 μ m i.d.

眼科用硅油的材料为聚二甲基硅氧烷（Polydimethylsiloxane，PDMS）.在常温下，其屈光指数为1.404，与玻璃体屈光指数相近，与晶状体的屈光率基本相同。

The silicone oil material used in eye is Polydimethylsiloxane ( PDMS ) . The refractive index is 1.404 at the room temperature , which is similar to vitreous body and lens .

利用聚合反应合成了一种柔软剂N-环己基-γ-氨丙基聚二甲基硅氧烷ASO-702。

A fabric softener N-cyclohexyl - γ - aminopropyl polydimethylsiloxane ( ASO-702 ) was synthesized by a ring-opening polymerization .

过滤检测的方法十分灵敏，在对环境污染物监测以及定量分析方面存在潜在应用。2、研究了聚二甲基硅氧烷（PDMS）作为SERS基底的修饰剂对有机污染物的富集效果。

The substrates are sensitive and the flow-through method has potential application in monitoring pollutants . 2 、 We investigated the enrichment effect of polydimethylsiloxane ( PDMS ) for organic pollutants as the SERS substrate functional agent .

以乙醇/水体系为研究对象，结合Flory-Huggins理论，讨论溶胀过程的热力学行为，用以分析和考察聚二甲基硅氧烷（PDMS）膜在乙醇/水中的溶胀特性及组分间的耦合效应。

Ethanol / water mixture was dissolved in PDMS membrane prepared in laboratory in conjunction with ( Flory - ) Huggins theory to analyze the swelling ( behavior ) of the membrane .

该微泵利用聚二甲基硅氧烷（PDMS）作为泵膜，使用了一个主动阀和一个被动阀，并利用压电双晶片作为驱动部件。

Polydimethylsiloxane ( PDMS ) is utilized to form the diaphragm , a passive valve and an active valve are formed by anisotropic etching of bulk silicon , and a piezoelectric bimorph is used as the actuator .