羧基丁苯胶乳

羧基丁苯胶乳具有优良的成膜性和粘结性，其应用范围极广。

Carboxylic styrene butadiene latex has wide range of applications because of its excellent film-forming and adhesive properties .

考察了后添加乳化剂种类与用量、醇类、pH值、固含量对胶乳冻融稳定性的影响，确定了羧基丁苯胶乳的防冻剂配方（0.7份防冻剂Ⅰ和0.3份防冻剂Ⅱ）。

The effects of types and amounts of emulsifiers added , alcohols , pH values and solids content on the freeze-thaw stability of carboxylated styrene-butadiene latex were investigated . The recipe of antifreezer was 70 % antifreezer ⅰ and 30 % antifreezer ⅱ .

YH-05羧基丁苯胶乳粘合剂在铜版纸中的应用

Application of YH-05 Carboxylated Styrene-Butadiene Latex Binder in Coated Paper

结果表明，燕化公司研究院研制生产的YH-05羧基丁苯胶乳各项性能指标与Dow-675、SD-656相当。

The results showed that behavior of YH-05 similar to Dow-675 and SD-656 .

讨论了羧基丁苯胶乳物化性能对铜版纸涂布性能的影响，对比了YH-05、Dow-675、SD-656三种羧基丁苯胶乳的成纸性能。

Physical and chemical behavior of YH-05 , Dow-675 , SD-656 carboxylated styrene-butadiene latex in paper coating are discussed .

采用间苯二酚-甲醛-羧基丁苯胶乳对尼龙短纤维进行了预处理，研究了自处理短纤维/橡胶复合材料（SFRC）的性能，并与乌龙牌预处理SFRC进行了对比。

Resorcinol-methanal-carboxylated SBR latex adhersive system was used in the pretreatment of short nylon fiber . The properties of SFRC composites prepared by lab-pretreated were studied , and compared with SFRC composites prepared by DN-3 short fiber respectively .

在2000t／a工业试验装置上，用低皂乳液聚合法在高温、高转化率下采用分批加料方式合成了羧基丁苯胶乳，并开发研究了聚合、脱气和浓缩的工程放大。

The carboxylated butadiene-styrene rubber latex was synthesized in a 2000t / a pilot plant by the batch process , using low-soap emulsion polymerization with multi-feeding at elevated temperature and high monomer conversion . The engineering enlargement of the polymerization reactor and devolatilization stripper was studied .

羧基丁苯胶乳生产釜挂胶的成因及清洗

Reasons of Gel 's Formation and Cleaning About SBR Latex Polymerizer

羧基丁苯胶乳在涂层内分布的检测

Study on Distribution of Carboxylated Styrene butadiene Latex in Coating Layer

羧基丁苯胶乳在尼龙短纤维预处理中的应用

Application of carboxylated SBR latex in pretreatment of short nylon fiber

天然胶乳/羧基丁苯胶乳共混制自黏胶乳

Natural rubber latex / carboxylated SBR latex for self-adhesive latex

高固羧基丁苯胶乳的工艺开发

Technological development for synthesis of high solid content carboxylated butadine-styrene rubber latex

用化学法脱除羧基丁苯胶乳中残余苯乙烯

Chemical removal of residual styrene in carboxylated styrene - butadiene rubber latex

羧基丁苯胶乳工业技术的工程开发

Engineering development for commercial technology of carboxylated styrene - butadiene rubber latex

羧基丁苯胶乳的工业试验及工程开发

Pilot plant trial and engineering development for synthesis of carboxylated butadiene-styrene rubber latex

油气田固井专用羧基丁苯胶乳的合成

Synthesis of special carboxyl styrene-butadiene rubber latex for cementing well in oil-gas field

水墨用羧基丁苯胶乳的合成

Synthesis of carboxylated styrene-butadiene latex for water-based printing inks

造纸用新型羧基丁苯胶乳的开发与应用

Development and Application of SBR Latex Used in Papermaking

高功能化羧基丁苯胶乳在涂布白纸板中的应用

Application of High Functionalized Carboxylated Styrene-butadiene ( SBR ) Latex in Coated White-Board Paper

干燥对羧基丁苯胶乳迁移的影响

Influence of Drying on Binder Migration

研究了高功能化羧基丁苯胶乳在涂布白纸板面涂中的应用情况。

The application of high functionalized SBR latex in the top layer of coated board was investigated .

对比了现有国内生产造纸用羧基丁苯胶乳的各项指标，剖析了国内高速涂布纸生产厂家所用的进口胶乳；

The indexes of domestic carboxylated styrene-butadiene latex for paper coating were compared and the imported latexes used in paper coating were analyzed .

含羧基丁苯胶乳比例较大的涂料，表观粘度最小。

The apparent viscosity of the coating containing higher ratio of carboxylated SB was the lowest , the coating containing PVA was in between .

以硫酸亚铁为催化剂用水合肼及过氧化氢对羧基丁苯胶乳在常压下进行加氢。

Hydrogenation of carboxylic styrene-butadiene latex was carried out using hydrazine and hydrogen peroxide with ferrous sulfate as catalyst without pressurized hydrogen and an organic solvent .

一是采用了国产价廉的羧基丁苯胶乳代替进口价高的丁吡胶乳，实验结果表明，羧基丁苯胶乳体系可使预处理获得一定的粘合性能，同时可以大大降低预处理成本；

The results of the experiments indicate that carbolated styrene-butadiene latex system can endue the pretreatment with adhesive performance at the same time reduce the cost of pretreatment greatly .

讨论了增粘树脂浓度直接影响着乳液稳定性，树脂／羧基丁苯胶乳比例影响着地毯胶的粘结强度；

It was found through discussion that concentration of tackifying resin directly affected emulsion stability and the ratio of resin to carboxylated styrene butadiene rubber emulsion affected adhesive strength of carpet adhesive .

考察了以专用羧基丁苯胶乳为基础料的制钢桶用专用密封胶粘剂的粘结性、耐寒性、耐热性、耐溶剂性、存放稳定性等基本性能及应用性能。

The properties and application performances of adhesive composed of special carboxylated butadiene - styrene latex as elementary component were studied , including resistances to cold , heat and solvent , adhesion and store - stability et al .

实验结果表明，高功能化羧基丁苯胶乳具有优良的机械和化学稳定性，配制的涂布白纸板面涂涂料性能稳定，保水性能好，高剪切条件下表观黏度较低。

The results showed that high functional latex have excellent mechanical and chemical stability , and the top layer coating color containing the SBR latex has good performance , good water-holding characteristic and lower apparent viscosity under high shear force .

在羧基丁苯胶乳生产中，清釜前后的聚合环境变化、聚合釜搅拌有效功率大小和预热时间长短都能影响聚合反应速率。

The rate of polymerization in the production of carboxylated butadiene-styrene rubber latex was influenced by the change of polymerizing condition in fore - and - aft reactor cleaned and the efficient power of mixing in its reactor and the time of warming-up their materials .

羧基改性丁苯胶乳多元水泥浆体系的研究

Study on Carboxylic Styrene Butadiene Latex Complex Cement Slurry System