簧片

huáng piàn
  • reed;leaf;languet;languette
簧片簧片
簧片[huáng piàn]
  1. 由于系统的设计对象是具有复杂加工曲面的簧片,因此对于类似复杂曲面的CAD有借鉴意义。

    Since reed is complex cut surface , it 's useful to similar complex surface CAD system .

  2. 本文介绍簧片阀的有效作用力面积(βAp)和推力系数β的实验装置和实验方法。

    The paper introduces an experimental apparatus and measuring method for effective force area (β A_p ) and drag coefficient β of reed valve .

  3. 把GA应用于同时求解非线性蛇簧联轴器簧片振动主共振的复数解问题,讨论了问题的模型,GA的适应函数和具体的算法。

    This paper applies simultaneously genetic algorithms to the forced resonance solution of nonlinear grid coupling and discusses its computational model , fitness function and specific algorithm .

  4. 应用有限元分析软件ANSYS对簧片的振动进行模拟,探讨簧片的长度和厚度改变对其固有频率和振动模态的影响。

    Finite element analysis software ANSYS to simulate the vibration of the reed to explore the length and thickness of the reed influence on the natural frequency and vibration mode .

  5. 介绍了N2光驱中压盘簧片的高速级进冲模的结构设计及特殊的加工工艺方法。

    This paper mainly introduced structure design method of high-speed stamping die for the spring presser in N2 CD-room and special process method .

  6. 根据PDE供油系统的特点,创新性的采用簧片来控制爆震管燃料的喷注。

    According to the characteristic of PDE fuel injection system , the spring lamination was adopted to control the fuel injection of detonation chamber .

  7. 居里温度、元件尺寸的大小及消磁正、副片间金属簧片的厚度对电脑彩色显示器PTC消磁热敏电阻器的电流衰减特性有重要影响。

    The result showed that Curie temperature , the element size and the thickness of metallic leaf springs have a significant effect on the characteristics in current attenuation of the above mentioned thermistors .

  8. 目前采用的气流发声器有Hartmann哨、旋涡哨、喷注边棱哨(簧片哨)、单孔喷注旋转阀和多孔喷注旋转阀等等。

    The air current sound generators at present include the Hartmann whistle , vortex whistle , jet-edge whistle ( resonant wedge whistle ), single-hole jet rotary valve , multi-hole jet rotary valve , and so on .

  9. 这种双层簧片分析法对于探讨固化历程、确定固化温度及时间等工艺条件都十分简便,它还是筛选耐热性FRP配方、检验不同存放期予浸料铺敷性的有用手段。

    The TRA proved to be a simple and useful technique for studying the curing processes of FRP , selecting the recipes of heat resistant resin systems , determining the required curing temperature and time , and checking the drapability of prepreg with different storage lives .

  10. 将FRP预浸料和钢片载体制成双层簧片试样,用振簧仪进行动态力学分析(DMA),从而监测、研究FRP的固化。

    The curing process of FRP prepreg could be readily tested by means of the two-layered reed analysis method ( TRA ) , in which a strip of FRP prepreg was bonded to a thin steel and its DMA was tested with a vibrating reed instrument .

  11. 为了满足主镜的设计约束条件,主镜柔性支撑簧片厚度设计的较薄(1.3mm),因此有必要对主镜组件的结构稳定性进行校核。

    For the flexible support reed is very thin ( 1.3mm ), it 's necessary to study the buckle of the primary mirror assembly .

  12. 簧片阀座组合是NF50摩托车发动机中的重要部件,它不但影响发动机起动性,而且影响油耗和怠速波动率。

    The seat combination is an essential part used on NF50 motorcycle engine , which influences the starting ability , fuel consumption and idle speed fluctuating rate of the engine .

  13. 压缩机簧片阀工程设计新技术

    A New Technique for Engineering Design of Reed Valve in Compressors

  14. 簧片阀三种力学模型的建立及比较

    Establishment of Three Mathematical Models and Comparison for the Reed Valves

  15. 弹性联轴节主簧片的激光热处理

    Laser heat treatment of a master reed in elastic shaft coupling

  16. 预压簧片级进模设计与制造

    Design and Manufacture of Progressive Die for the Pre-Pressed Spring Leaf

  17. 航天用电磁继电器折线形簧片的固有频率分析

    Analyzing Natural Frequency of Polygonal-shape Spring for Electromagnetic Relay in Aerospace

  18. 微型继电器接触簧片镀金工艺研究

    Technics of gold plating on contact spring strip of microminiature relay

  19. 舌簧片振动法测杨氏模量

    Measuring Young modulus of materials by the method of vibration reed

  20. 冰箱压缩机吸气簧片阀的数值模拟与优化

    Simulation and optimization of the suction reed valve of refrigerator compressor

  21. 簧片簧乐器中振动的前端。

    The vibrating end of a reed in a wind instrument .

  22. 继电器簧片气隙的激光校正试验研究

    Experiment and Study on Laser-adjusting to the Gap between Relay Copper Sheets

  23. 键盘式管风琴;鼓式簧风琴及类似的带自由金属簧片的键盘乐器

    Keyboard pipe-organ ; harmonium and similar keyboard instrumen with free metal reeds

  24. 基于扭矩测量的二维簧片重力梯度仪的设计

    Design of 2D flexure hinges gradiometer based on torsion measurement

  25. 高速复杂形状簧片阀动力学模型的研究

    Study on the dynamic model of HIGH-SPEER reed valve of complicated shape

  26. 空气通过簧片引入吸气风箱。

    Air is drawn in through reeds by suction bellows .

  27. 无升程限制器的条状簧片阀开发

    The Development of the Feather Valve Without The Valve Guard

  28. 簧片的尺寸对圆柱腔型簧片哨发声频率和声压级有影响。

    The sound frequency impacted by the size of reeds .

  29. 压缩机簧片阀的有效作用力面积和推力系数研究

    The Effective Force Area and Drag Coefficient of Reed Valve in Compressors

  30. 平行簧片式三维模拟测头的设计

    The Design of 3-D Analog Probe of Parallel Plate Springs

热门查询