直接复合

为了提高纳米氧化物对AP热分解的催化性能，采用对其进行表面改性、掺杂混合、与高氯酸铵（AP）直接复合等方法来进行研究。

In order to improve the catalytic performance of nanometer-sized oxide on the thermal decomposition of AP , the methods of the surface modification , doped mixing and composite with AP directly of nanometer-sized oxide are studied .

该工艺的设备系统可在一道工序中进行纺丝及POY与HOY或其他特殊丝组合的直接复合，具有很好的成本效益，最高速度可达4800m/min。

This system permits the spinning and direct combination of POY and HOY , or any other special yarn combination , in a single step . This process is highly cost efficient and at very high speeds in excess of 4 800 m / min.

结果表明，复合界面为带有的旋涡的准正弦波形，复合方式为直接复合和熔化复合二种。

The results show that the interface is sine-like with eddies .

锆质直接复合式长寿定径水口的研制与使用

Development & application of fixed diameter nozzle of high-zircon direct-composition

这种共振态模型肯定比直接复合模型更有吸引力。

This model of a resonance is certainly more sophisticated than that of a straight forward composite state .

本文介绍了通过加入添加剂以及合理选择工艺参数来解决高氧化锆直接复合式定径水口在制作及使用过程中的开裂现象。

This article introduced that by adding in some additive and selecting the reasonable technical parameter , the crazing of the fixed diameter high-zircon direct-composite nozzles , in the course of being made and used , was resolved .

对ZnO薄膜发光光谱常见的三个发光带，即紫外、绿光和黄光而言，紫外发光普遍被认为是带-带直接辐射复合发光或激子发光；

There are usually three types of luminescence bands in spectrum of ZnO thin film , which are UV luminescence , green luminescence and yellow luminescence . Ultraviolet emission is generally attributed to band-band direct radiative recombination or excitons radiation .

本文使用接触反应法制备TiCp／LY12复合材料熔体，然后经固液挤压直接制取复合板材与棒材。

Contact reaction method was used to prepare TiCp / LY12 composite slurry in present study , and then the composite plates were manufactured with semisolid extrusion method .

气动力/直接力复合控制系统零极点配置设计

Design of Aerodynamic / Reaction-jet Multi-control System Using Pole-Zero Assignment

直接熔融复合制备聚酰胺6/未改性蒙脱土纳米复合材料

Direct Melt Compounding for Polyamide 6 / Pristine Montmorillonite Nanocomposites

基于气动力/直接力复合控制的空空导弹末端制导性能分析

Analysis on Side Jet / Aerodynamics Compound Control of Air-to-Air Missile in Endgame

气动力/直接力复合控制拦截弹的气动外形设计及弹道仿真

Aerodynamic Configuration Design and Trajectory Simulation of an Interceptor Controlled by Aerodynamic / Lateral Thrust

在基于内容的数字音乐检索研究中，其音乐库大都直接使用复合音音乐数据文件。

Much of the work on content based music query focuses on polyphonic music files .

说明了非织造布/软木纸复合工艺中粘结剂比例直接影响复合产品的弯折性能。

The bending performance is effected by ratio of bonding agent in nonwovens / cork bumf complex technics .

但是尚无较好的方法直接计算复合材料防弹特性，其中困难在于复合材料弹道冲击过程中的应变率效应和冲击破坏机理至今没有被揭示。

But it is difficult to model the behavior of composite materials under ballistic impact because of the complexity of damage mechanism .

当杆的断面收缩率比杯形部分断面收缩率大得较多时，不适合直接用复合挤压成形。

When the shrinkage of the rod fracture surface much more than that of the cup part fracture surface , its formation by compound extrusion is not applicable .

纳微米材料在高聚物基体中的分散程度直接影响复合材料的性能，它们的分散和防团聚技术是材料能否实用化的关键。

Dispersibility of nano / micro materials in polymer has an effect on the properties of composites directly . Their dispersibility is the key factor to materials ' utility .

仿真结果验证了该点火算法的有效性。最后研究了姿控式气动力/直接力复合控制自旋拦截弹的制导控制仿真平台。

The simulation results proved the validity of this fire algorithm . Finally , the guidance and control simulation platform was designed for the interceptor missile with aerodynamics and lateral thrust blended .

采用水平连铸复合的方法，在冷却速度达到80℃/s的条件下，将Al10%Pb合金熔体直接铸造复合到钢背上获得Al10%Pb钢背轴瓦材料。

Under the cooling rate 80 ℃ / s , an Al-10 % Pb-steel backing bearing material was obtained by casting Al-10 % Pb melt onto steel backing in the process of horizontal continuous casting .

在普通双螺杆挤出机上，基于未改性蒙脱土和聚酰胺6的直接熔融复合制备了纳米复合材料。

An original direct melt extrusion processing of polyamide 6 / clay nanocomposites is reported , based on pristine ( Na ~ + - based ) montmorillonite as well as a simple approach using typical twin-screw extruder .

直接把复合肥粉碎样加到卡尔·费休滴定容器中测定其游离水，省去萃取和离心步骤，简化了操作，分析结果重现性和准确度更高。

The free water is to be determined by adding directly smashing the NPK compound to the karl Fisher Titrator without the extraction and centrifuging , so that the operation process becomes easy , and the result shows the higher accuracy .

同时，每日咽部直接喷FE复合酶口腔消毒喷雾剂4次，每次3喷。

At the same time , FE Complex Enzyme Oral Cavity Disinfectant Spray was used four times one day , three presses once .

利用Pro／E工程软件，建立精密剪切设备的几何模型，融合了特征建模、参数建模和直接建模的复合方法。

Utilized Pro / E project software , sets up the geometry model of the accurate shear equipment , had merged characteristic modeling , parameter modeling and direct modeling complex method .

本论文工作拟采用无压渗透工艺，利用铝合金直接氮化原位复合MgO制备性能优异的特种耐火材料，希望能为传统耐火材料生产工艺开辟出一条全新的制造工艺。

MgO / AIN composites will be prepared by Al alloy welt infiltration into MgO preforms with the aim of establishing a novel process for the refractories in this paper .

特点：直接高温挤压复合，黏贴结实不脱层。

Features : high temperature extrusion compound , paste directly off layer stout .

设计了滚转导弹气动力与姿控直接力的复合控制系统。

The combined control system was designed .

并以此模型来研究其气动力与姿态直接力的复合控制规律。

Using this model , the combined-control-system of aerodynamics and direct force produced by lateral jets .

若为单级或二级传动时用直接法&复合形法寻优。

For single or double transmission , the direct search method-the complex method is used for optimization .

介绍气-固流化床内直接进行钢塑复合的原理、工艺和装置。

The principle , technology and apparatus on plastics-steel composite in an air-solid fluidized bed were introduced .

空气动力和直接侧向力复合控制的拦截弹飞行力学及稳定回路模型

A flight mechanics and stable control loop model of interception missile with the blended control by aerodynamic force and moment-gas-thrust-vector