盘车

在使用抱闸扳手时，必须有一人控制抱闸扳手，而另一人转动盘车手轮。

To operate the equipment , it is essential for one person to control the releasing of the brake , whilst another operates the winding crank .

SSS离合器式高速盘车装置初步方案

Preliminary Scheme on SSS Clutch Type High-speed Turning Gear

珠海发电厂2号机组B给水泵汽轮机盘车损坏的分析

Analysis on damage to turning for Feed Pump Turbine B of Unit 2 in Zhuhai Power Station

基于PLC的汽轮机盘车控制系统的分析

The Analysis of Control System of Turbine Barring Gears Based on PLC

介绍了新一代ZKPG－1型水轮发电机智能电盘车装置的原理、结构、双通道控制／调节功能和PLC智能分相以及应用实绩，并提供了实用的技术数据

The principle , structure , dual channel control / regulation

DP型电动盘车器的改进

Improvement of Type DP Electric Barring Device

三峡左岸电站VGS机组盘车及总装工艺改进

Improvements on axis alignment and assembly process of VGS units for Three Gorges Left Powerhouse

为此，在对珠海发电厂汽轮机盘车结构和工作原理介绍的基础上，探讨了2号机组B汽动给水泵汽轮机运行时盘车异常的原因，并提出了改进建议。

With the description of the structure and working principle of the turning for the feed pump turbines in Zhuhai Power Station , this paper analyzes the causation of the turning malfunction during the operation of Feed Pump Turbine B of Unit 2 .

1000MW汽轮机组盘车装置研究及设计

Research and Design of 1000 MW T-G Unit Turning Gear

SSS离合器式高速盘车装置适合小型汽轮发电机组上使用，与传统盘车装置比较有结构紧凑、减小汽缸温差等优点。

SSS clutch type high-speed turning gear is suitable for small turbine-generator unit . Compared to the traditional turning gear , it has such advantages as compact structure and small casing temperature difference .

珠海发电厂700MW机组调试期间盘车装置的损坏分析

Analysis of Damage to Turbine Turning Gears in Commissioning of 700 MW Unit of Zhuhai Power Plant

由于型材轧机主传动系统中轧机与齿轮箱、轧机与轧机间梅花接轴联接困难，焦作钢铁公司研制出一种轧机盘车装置，该装置结构简单，可使更换工装时间从6h缩短为4h

There is difficult of joining coupling box of driving system of section mill , so a mill jigger equipment was developed by Jiaozuo Iron and Steel Co which has simple structure , and can shorten the shafts changing time from 6 hours to 4 hours

珠海发电厂700MW进口机组在调试期间汽轮发电机盘车装置轮齿损坏的原因主要是盘车第二级减速主动齿轮设计强度裕度不足。

Damages to turbine turning gear in commissioning of Unit 1 in Zhuhai Power Station are presented . The main cause for the damage lies in lack of strength in teeth design .

汽轮机&压缩机组液压盘车器的自动控制

The Automatic Control of Hydraulic Barring Gear in Hot Turbine-Compressor Unit

依轿厢所需上下方向转动盘车手轮。

Turn winding crank for required direction of movement of car .

盘车与静态刹轴机构的设计

Design of a Spinning and Stationary - State Shaft - Braking mechanism

锅炉给水泵汽轮机高速盘车装置的设计

Design of High Speed Turning Gear for Boiler-feeding Pump Turbines

不投盘车冲管方案的应用与分析

Application and Analysis of Pipe Blowing Option without Turning Gears

对盘车数据优化处理方法的研究

Study on the Optimum Method of Turning Data Processing

汽轮机盘车装置自动控制的设计

Design of Auto - control for Turbine Turning Gears

超临界压力机组给水泵汽轮机高速盘车技术改进

Technical Retrofit on High-speed Barring of Feed Pump Turbine for Supercritical Pressure Unit

功率强劲的三相输出可免除人力盘车的难题。

Strong three-phase power output solves the trouble of hoisting the car by manpower .

汽动给水泵组连续盘车时存在的问题及改进措施

Problems Encountered with Continuous Barring Steam Driven Feed Pump Sets and Ways of Improvement

利用齿轮联轴器加装的一种轧机盘车装置

A mill jigger equipment with gear coupling

龙滩水电站5号机组盘车与水导摆度处理

Turning and treatment of turbine guide bearing throw of Unit 5 in Longtan Hydropower Station

大功率船用柴油机盘车机用多级行星齿轮减速器的研制

Development of the Multispeed Planetary Gear Reductor for the Turning of Huge Power Marine Diesel Engine

微机电动盘车装置的研制

Development of Micro-Computerized Electric Barring Equipment

就盘车装置的功能要求，提出初步的设计方案。

The preliminary design scheme is proposed in view of the function requirements on turning gear .

STM360/570双进双出磨煤机盘车装置优化设计

Optimal deign of jiggle device of STM360 / 570 double entry and double exit ball mill

高速盘车是很容易实现的，而且在国内已经实现了。

High speed barring gear is easy to perform and it has already been performed at home .