盘条
- 名wire rod
![盘条](../cache/1340986.jpg)
-
提高82B盘条表面质量的优化工艺
Optimized Process to Improve Surface Quality of 82B Wire Rod
-
优化原材料质量、提高82B盘条的深加工性能
Optimizing the Raw Material Quality and Improving the Deep-processing Performance of 82B Wire Rod
-
影响PC钢盘条塑性指标的因素浅析
Analysis of Factors Influencing on Plasticity Index of PC Wire Rods
-
盘条缺陷对PC钢棒质量的影响
Effect of Defects in Wire Rod on the Quality of PC Steel Bar
-
高强度预应力(PC)钢棒用盘条的开发
Development of wire-rod used for high-strength pre-stress steel rod
-
研究结果表明,针对1860MPa级PC钢绞线用热轧高碳盘条的拉拔生产,其最佳拉拔角约为8°。
The results show that the optimized angle of drawing die is about 8 ° .
-
Cr、Mo冷镦钢盘条控冷工艺研究
Research of Cr 、 Mo Cold Heading Wire Cooling-controlled Process
-
采用激光拉曼光谱并结合SEM和XRD等手段对高碳钢盘条表面氧化皮进行了研究,同时,对不同冷却条件下形成的氧化皮机械剥离性能进行了评价。
The three-layer structure of oxide scale formed on high carbon steel wire was confirmed by laser Raman spectroscopy ( LRS ), together with SEM and XRD .
-
镀Ni-Cu盘条生产焊丝的研究
Investigations of Manufacturing Welding Wires from Ni - Cu Coated Wire Rod
-
本文介绍广钢集团开发高强度预应力PC钢棒用盘条的生产及技术特点。对工业试验结果进行分析,提出批量生产应该注意的问题。
This article introduces the productive and technical characteristic in developing high strength pre-stress steel bar by GISE , and analyses the industrial trial result and puts forward the attentive problems for batch production .
-
φ6mm带肋盘条轧制工艺分析及对策
Rolling technology and Countermeasure of φ 6mm ribbed coil rod
-
82B高碳钢盘条拉拔脆断的原因分析
Cause Analyses on Brittle Fracture of 82B Wire Rod
-
Si-Mn合金弹簧钢带控轧控冷工艺研究盘条轧制控制冷却法
Research on the Controlled Rolling and Controlled Cooling Technology for Si-Mn Alloy Spring Steel Strip stelmor process
-
82B盘条脆断原因分析
Brittle Fracture Cause Analysis of 82B Wire Rod
-
介绍武钢PC钢丝及钢绞线用高碳钢盘条的生产和质量改进工作,分析存在的问题,提出了下一步工作的思路及建议。
The production and quality improvement of high carbon steel wire rod for PC steel wire and steel strand in WISCO are introduced and problems existing analyzed and considerations and proposals for the future work put forward .
-
120mm方坯轧制Φ6.5mm盘条的孔型设计
Pass Design of Rolling 120 mm Square Billet into Φ 6.5 mm Wire Rod
-
针对影响高线控冷盘条塑性性能指标的诸因素进行了分析,控制、改善PC盘条的塑性性能,以利于PC钢丝、钢绞线的生产和产品性能达标。
Factors influencing on plasticity index of high-speed cold control wire rod is analysed . Controling and improving the plasticity index of PC wire rods can get better production of PC steel wire and strands and reach standard product property .
-
72A高线盘条在胶管钢丝生产中的应用
Application of 72A High Speed Wire Rod to Production of Steel Wire for Hose
-
文章对72B钢盘条断口进行了较系统的检验分析。
The Fracture of 72B rods are analyzed systematically .
-
控轧过程中冷却速度对35K钢盘条冷镦性能的影响
Effect of cooling rate on the cold forging property of steel 35K during its controlled rolling
-
预应力钢绞线用优质高碳盘条82B在拉拔过程中常出现脆断现象。
There is brittle fracture frequently during drawing the high carbon wire rod 82B , which is used for pre-stressed strand .
-
72B钢盘条断裂及断口分析
Fracture Analysis of Steel 72B Wire Rods
-
对82B钢盘条拉拔脆断断口进行了金相组织和夹杂物检测,并借助扫描电镜观察分析了拉拔过程中产生的脆性断口形貌。
The fracture section microstructure and inclusion of 82B wire rod were tested , and the drawing brittle fracture was examined using SEM .
-
全球产量最高的钢材生产商安赛乐米塔尔(ArcelorMittal)表示,将于下周二重新启用位于南卡罗莱纳州乔治敦的盘条厂。
ArcelorMittal , the world 's largest steelmaker by output , said it will reopen its wire rod mill in Georgetown , S.C. , next Tuesday .
-
杭州钢铁集团公司生产的ML35(B)冷镦钢盘条,在镦制内六角螺栓时发生了开裂现象。
This paper introduces analysis on cracks in hexagon socket head bolts of ML35 ( B ) cold heading steel wire rod which is made in Hangzhou Iron & Steel Group Company .
-
对Q235钢盘条,采用先拉拔后淬火或先淬火后拉拔两种工艺方法进行试验。
This paper deals with the test of Q235 wire through different technologies such as drawing first and hardening second or hardening first and drawing second .
-
对盘条和钢丝的热处理强化和微合金强化分析后认为,高碳钢盘条添加微量Cr,V元素,通过斯太尔摩冷却可制造1860MPa斜拉索用镀锌钢丝。
Through analysis of heat treatment and microalloy strengthening of wire rod and steel wire , it is considered that adding a small quantity of Cr , V and stelmor control cooling , 1 860 MPa galvanized wire for inclined drawing cable can be produced .
-
H08MnA、H10Mn2、H10MnSi焊接用盘条的研制
Development of H08MnA 、 H10Mn2 、 H10MnSi Wire Rod for Weld
-
用该双相钢盘条可生产8.8级M10,M14六角头螺栓和M8双头螺柱。
Using the Dual-phase steel wire rod can produce 8 . 8 grade M10 , M14 hexagon head tap bolts and M8 tapped studs .
-
因此开发400MPa级热轧盘条具有较大的经济效益和社会价值。
Developing hot rolled ribbed wire rod of 400 MPa has the great economic benefit and social value .