田口方法

用SPICE仿真软件分析功能简化田口方法外表以优化参数设计

Predigesting Taguchi Method Exterior list by Monte Carlo Analysis Function of SPICE

SPC、EPC与田口方法的比较及整合

The comparison and integration among SPC , EPC and the taguchi method

基于田口方法的铌酸锂基片CMP工艺研究

Study on Chemical Mechanical Polishing of LiNbO_3 Wafer by Taguchi Method

利用田口方法探讨TiO2中空球之合成研究

Synthesis of Hollow TiO_2 Spheres by Taguchi Method

同时还利用田口方法中关于校准的理论，解决了GUM理论中只能进行固定点校准，无法进行任意点校准的缺陷。

At the same time , the calibration theory in Taguchi methods helps to improve the GUM flaw of calibrating on fixed point only to reach any point calibration .

本研究以田口方法和GUM两种理论为依据，对两者在校准及测量不确定度评定中的应用进行比较分析。

This article compares and analyzes the applications of the Taguchi methods and the GUM ( Guide to the Expression of Uncertainty in Measurement ) theory on calibration and measurement uncertainty study .

其次，从作用互补的角度分别论述了QFD和西方经典实验设计及田口方法的功能集成原理。

Secondly , from the mutual support point of view , it addresses the functional integration of QFD with classical DOE and Taguchi Methods respectively .

评价结果表明，基于POD的可靠性评估法较好的实现了对深层缺陷检测的可靠性评估。3为了提高电涡流深层缺陷的可靠性，研究了基于田口方法的实验设计优化问题。

The application shows that the reliability of inspection can be efficiently evaluated . 3 The Taguchi method is studied for optimizing the experimental design to improve the reliability in deep-seated flaws detection in eddy current testing .

工作的重点有三个方面：一是将田口方法和GUM应用于测量不确定度的评定中，分析了两者在测量不确定度评定中的异同点和优缺点。

There are three focus areas : First , to apply Taguchi methods and GUM in the study of measurement uncertainty , and to compare and analyze both methods in the assessment of similarities and differences and advantages and disadvantages .

针对田口方法的不足，本文在双因子方法DRA（dualresponseapproach）的基础上从经济的角度讨论了参数设计问题。

Aimed at the fault of the Taguchi method , the paper investigates the parameter design problem from an economic point of view in the base of DRA .

引入田口方法，对HPD型锯齿型错列翅片进行参数化研究，综合考虑翅片的性能与成本，得到优化几何参数的翅片方案。

Taguchi method is introduced to carry out parametrical study on the HPD type offset strip fins , and the optimum scheme is obtained , which is originated from the geometrical parameter combination based on the optimal combination of performance and cost . The multiple quality-cost loss function is introduced .

田口方法在蓄能发光陶瓷制造工艺中的应用

Application of Taguchi Methods in the Preparation Techniques of Light-storing Ceramics

田口方法在石墨负极改性研究中的应用

Application of Taguchi Methods in Modification for Graphite Used as Anode

田口方法在有机磷化工艺研究中的应用

Application of " Taguchi Method " to Organic Phosphating Process

基因演算法；非相关平行机；田口方法。

Genetic algorithm ; Unrelated Parallel Machine ; Taguchi method .

用田口方法推断校准仪器的测量不确定度

Uncertainty of Measurement for Calibrated Instrument Deduced with Taguchi Method

基于田口方法的关节轴承的优化制造工艺

Manufacturing Technology for Joint Bearings in Coal Machine Based on Taguchi Method

基于田口方法的小批量生产过程控制

Research on Process Control for Multi-product and Small-batch Production Based on Taguchi Method

基于田口方法的抗疲劳稳健设计研究

On Anti - Fatigue Design Using Taguchi Method

重点介绍了田口方法及其三次设计，并对这三种方法进行了评述与比较。

At last we comment and compare the three kinds of methods of DOE .

田口方法在吸波涂料中的应用

Application of Taguchi Methods in Antiradar Coating

结果表明，基于田口方法设计的转向机构可靠性强，稳健性能好。

The steering mechanism based on Taguchi method is shown high reliability and strong robust .

这堂课利用课内练习介绍了田口方法。

This lecture introduces the concept of Taguchi Methods with the help of an in-class exercise .

学习完整田口方法且能独立应用此方法于研究上。

Learn the integrity Taguchi method and can be independent to apply this method in study .

本文第一部分研究了田口方法的基本原理，并对其进行了改进以合理的处理带约束的优化问题。

The first part of the paper improved the Classical Taguchi method to solve constrained optimization problem .

关于田口方法中望大特性信噪比的改进

Optimization of Taguchi 's Signal-to-noise Ratio for the Case of " Larger the Better " Quality Characteristics

提出一种替代静态田口方法进行稳健性设计的方法&双响应面法。

Dual respone surface method which is an alternative to the static Taguchi Method is proposed in this paper .

为探明各影响因素对工序加工质量的影响，采用田口方法&稳健性设计对筛分加料工序进行了较为系统的质量评价与参数优化。

Quality evaluation and parameter optimization of sieving and casing process were studied based on Taguchi method & robust design .

基于田口方法提出了一种解决多质量特性参数设计的优化方案。

A method based on Fuzzy theory and Taguchi method is put forward to optimizing the design parameter for multiple quality characteristic questions .

应用和推广田口方法的主要困难之一是计算、统计和分析的工作量较大。

One of main difficult problems of using Taguchi method is that calculation , statistics and analysis should do a great quantity of work .