瓦楞纸板

wǎ lénɡ zhǐ bǎn
  • corrugated board
瓦楞纸板瓦楞纸板
  1. 应用四阶龙格-库塔数值法求解,从而得到瓦楞纸板包装系统的冲击谱和破损边界曲线,讨论了相关参数对它们的影响。

    The shock spectra and the damage boundary curve of corrugated board under the action of half-sinusoid pulse are obtained using four steps of Runge-Kutta numeric method , and the influence of various factors on shock response is discussed .

  2. 瓦楞纸板生产线原纸张力模糊自适应PID控制

    Fuzzy adaptive PID paper tension control in production line for corrugated board

  3. B楞双层瓦楞纸板衬垫平压缓冲动态性能建模

    The Dynamic Modeling of Flat Compression Cushioning Made up of B-Flute Double-Wall Corrugated Fiberboard

  4. 基于模糊PID控制的瓦楞纸板横切机速度跟随控制器设计

    Design on speed to follow controller of cross-cutting machine based on fuzzy PID control

  5. PVA改性瓦楞纸板淀粉胶的研制

    Studies of the PVA modified SRARCH-BASED corrugated paperboard adhesive

  6. 该机极具有模切E型瓦楞纸板、胶辊线速度自动补偿和胶套修复功能。

    The functions of die-cutting E flute corrugated cardboard , automatic compensation of glue roller line speed and rubber automatic repair .

  7. 瓦楞纸板与EPS板材组合包装垫振动传递特性的实验研究

    Experiment Research on Vibration Transmissibility of Polystyrene Packaging Pillow Combined with Corrugated Paperboard

  8. 瓦楞纸板生产线将配套DE细瓦楞单面机和纵切电脑薄刀片分压机。

    Corrugated board production line will be supporting DE thin corrugated single machine and slitting thin blade points the computer press .

  9. POP瓦楞纸板展示架具有很好地促进产品销售的作用,既环保,又方便运输。

    The POP corrugated cardboard display frame can promote product sale , is both environmental protection and convenience to transport .

  10. 对认清今后POP瓦楞纸板展示架形态设计的发展方向有着积极的现实意义。

    This paper has a positive and practical significance for understanding the future direction of development of conformation design about POP corrugated paper board displays .

  11. 瓦楞纸板中铅、镉、铬元素的AAS测定V,Cr和Ni的原子发射光谱分析新方法。

    Determination of Cd , Cr and Pb in corrugated boards The elements determined are Pb , Cd , Sn , V , Cr and Ni .

  12. 根据B楞双层瓦楞纸板衬垫静、动态平压的测试数据,归纳出瓦楞纸板平压缓冲性能的三个基本特征及其它特点。

    According to the measured data from static and dynamic flat compression tests on B flute double wall corrugated fiberboard cushion , the three basic characteristics of the corrugated fiberboard 's flat compression cushioning and other features are summed up in the paper .

  13. 生产性试验表明,经PVA改性后的淀粉胶,性能稳定,所生产的瓦楞纸板质量提高。

    The productive test shows that the properties of the starch adhesive modified with PVA are stable , and that the quality of paperboard produced with the modified adhesive is improved .

  14. X-PLY超强瓦楞纸板的强度试验研究

    An Experimental Study on Strength of X-PLY Corrugated Paperboard

  15. KMnO4氧化改性玉米淀粉瓦楞纸板粘合剂的研制

    Preparation of maize-starch adhesive modified with KMnO_4 oxidizing for corrugated paper

  16. 本文通过对X-PLY型瓦楞纸板的力学性能和静态缓冲特性进行理论分析和试验研究,为X-PLY型瓦楞纸板缓冲包装设计提供理论参考和设计依据。

    The mechanical properties and static cushioning properties of X-PLY-corrugated paperboard are researched by theoretical analysis and experimental studies .

  17. 通过振动传递特性试验研究获得了X-PLY(A)和X-PLY(B)超强瓦楞纸板振动传递率曲线,以及其峰值频率、传递率及阻尼比。

    The vibration transmissibility curves , peak frequencies , transmissibility ratios and damping ratios of X-PLY ( A ) and X-PLY ( B ) corrugated paperboard are obtained by vibration transmissibility tests .

  18. 利用AAS分析技术,对试样分解方法、共存元素干扰、仪器分析参数等因素的研究,确定最佳分析条件,建立了连续测定瓦楞纸板中铅、镉、铬有害、有毒元素的分析方法。

    A method for the determination of Cd , Cr and Pb in Corrugated boards was proposed . the analytical lines of determined elements , The operation parameters by AAS , the digestion of samples , the influence of coexisting elements were studied in detail .

  19. 试验及数值分析结果表明,X-PLY超强瓦楞纸板跌落冲击模型及其参数计算方法有效。(3)研究了X-PLY超强瓦楞纸板的振动传递特性。

    The experimental results and numerical analysis show that the drop shock model and the calculation method of model parameters are valid . ( 3 ) The vibration transmissibility of X-PLY corrugated paperboard is researched .

  20. 新型瓦楞纸板用淀粉粘合剂的制备及应用

    Preparation and Application of Starch Adhesive Used for New Corrugated Paper

  21. 瓦楞纸板中的新成员&特重型和微型

    New Member of Corrugated Paper , Extra Weight and Micro Style

  22. 半正弦波冲击时瓦楞纸板破损边界研究

    Study on damaged boundary curve of corrugated board under half-sinusoid pulse

  23. 全自动瓦楞纸板贴面机质量控制要点

    The Key Point of Quality Controlling of Automatic Corrugated Board Laminator

  24. 瓦楞纸板横切机的无键联接设计

    Design of keyless coupling for the corrugated cardboard transverse cutting machine

  25. 数字喷墨印刷技术在瓦楞纸板上的应用

    The Application of Digital Ink Jet Printing on the Corrugated Paper

  26. 防锈瓦楞纸板制备工艺和性能的研究

    Investigation on Fabricating Technics and Properties of Corrosion Inhibitive Corrugated Board

  27. 瓦楞纸板衬垫的缓冲性能及物理参数优化

    The Cushioning Performance and Physical Parameter Optimization On Corrugated Board Cushion

  28. 新型瓦楞纸板压线轮的研究

    Researches on the New Type of Press Roll for Corrugated Cardboard

  29. 基于瓦楞纸板缓冲系统的电子产品绿色包装解决方案

    Electronic Product Green Packaging Solution Based on Corrugated Fiberboard Cushioning System

  30. 高速五层瓦楞纸板生产线的降噪治理

    Lower the Noises in the High-Speed Five Level Corrugated Board Line