玻纤增强

  • 网络Glass fiber reinforced;POM;GRIVORY HTV
玻纤增强玻纤增强
  1. 低翘曲玻纤增强PET复合材料的制备和性能研究

    Preparation and Properties of Glass Fiber Reinforced PET with Low Warpage

  2. 一种三嗪阻燃剂对玻纤增强PET体系性能的影响

    Effect of Triazine on Property of PET Reinforced by Glass Fiber

  3. 长玻纤增强PET工程塑料的性能研究

    Study of Property of Long Glass Fiber Reinforced PET Engineering Plastics

  4. 玻纤增强阻燃PET的研制

    Development of flame retardant and glass fiber reinforced pet

  5. 水悬浮-拉挤法制备长玻纤增强PVC复合材料的研究

    Process research of long glassfiber reinforced PVC Composite by aqueous suspension pultrusion

  6. 长玻纤增强ABS复合材料的性能研究

    Study on properties of long glass fiber reinforced ABS composite

  7. 玻纤增强ABS复合材料的制备及性能

    Preparation and Properties of Glass Fiber Reinforced ABS Composites

  8. NaCl/PEO成核剂对玻纤增强PET力学性能及结晶的影响

    Effects of NaCl / PEO on Crystallization and Mechanical Properties of Glass Fiber Reinforced Polyethylene Terephthalate Composites

  9. 短玻纤增强ABS复合材料的研制

    Study of short glass fiber reinforced ABS composite

  10. 单向玻纤增强BMI复合材料的酸雨和温热老化行为

    Acid Rain and Hygrothermal Aging Behavior of Unidirectional Glass Fiber Reinforced BMI Composites

  11. 环氧树脂对玻纤增强PA6力学性能的影响

    Effect of Epoxy Resin on the Properties of Glass Fiber Reinforced PA6

  12. 短切玻纤增强聚丙烯保持了聚丙烯(PP)的优点,性能已达工程塑料的水平。

    Short glass fiber reinforced polypropylene maintains the advantages of polypropylene and its properties reach the level of engineering plastics .

  13. 采用悬浮浸渍拉挤成型法制备长玻纤增强ABS复合材料。

    Long glass fiber ( LGF ) reinforced ABS composite was prepared by means of a new method .

  14. 纳米CaCO3和玻纤增强PVC、HDPE、PP的力学性能研究

    Study on mechanical properties of pvc , hdpe , PP reinforced by nano-caco_3 and glass fiber

  15. 短玻纤增强、增韧PA6的力学及加工性能

    Mechanical Properties and Processability of Reinforced and Toughened PA6 by Short Glass Fiber

  16. 玻纤增强PTT复合材料流变性能研究

    Study on Rheological Properties of PTT / Glass Fiber Composite

  17. 比较和分析了不同类型阻燃剂对玻纤增强尼龙(PA)66性能的影响。

    The effect of various flame-retardants on the properties of glass fiber reinforced PA66 is compared and analyzed .

  18. 得出了不同含量玻纤增强PP挤出吹塑制件的最小壁厚的参考值。

    The minimum reference value of the wall thickness of GF / PP products with different content of GF was obtained .

  19. 镧化合物改性超细碳酸钙对玻纤增强PET结晶性能和力学性能的影响

    Effect of Ultra-Fine CaCO_3 Modified by La ~ ( 3 + ) on Crystallization Property and Mechanical Property of Glass Fiber Reinforced PET

  20. 玻纤增强阻燃PBT复合材料的制备

    Preparation of Glass Fiber Reinforced Flame Retardant PBT Composite

  21. 依据降低翘曲的机理,选用不同降低翘曲的方法,制备了系列低翘曲玻纤增强PET复合材料。

    Series of glass fiber reinforced PET with low warpage have been prepared according to the mechanism and different methods of reduction of warpage .

  22. 采用熔体浸渍工艺制备长玻纤增强PA6复合材料。

    Composite was prepared with melt dipping that PA6 enhanced with the long glass fibre .

  23. 利用热重动力学方法研究了玻纤增强PF尼龙(即石油发酵尼龙)的热稳定性能。

    The thermal stability of glass reinforced PF nylon was studied by means of thermogravimetric dynamics .

  24. 偶联剂对玻纤增强PF尼龙界面和性能的影响

    Effect of coupling agents on the interface and property of the glass fiber / pf Nylon Composites

  25. 高CTI值、无卤阻燃玻纤增强尼龙66的研究及应用

    Study on high CTI value , halogen free flame-retardant glass fibre reinforced nylon 66

  26. RTM工艺中玻纤增强材料渗透率的测量与分析

    The Measurement and Analysis of the permeability of the Glass Fiber Reinforcement for RTM process

  27. 所制备的PEI及其玻纤增强塑料的性能与美国同类产品相当。

    The properties of the prepared PEI and glass fiber reinforcing PEI were corresponded with those of the congener products in America .

  28. 通过熔体流动速率测试及转距流变实验,分析确定了不同含量玻纤增强聚丙烯(PP)的挤出吹塑成型加工性能及加工工艺。

    By measuring MFR and torque rheological property , the processing property and processing technique of the extrusion blow molding of GF / PP with different content of glass-fibre were determined .

  29. 添加12份十溴二苯醚/Sb2O3复合阻燃剂,可使玻纤增强PET的阻燃性能达到UL94V-0级。

    By adding 12 phr decabromodiphenyl oxide ( DBDPO ) / Sb_2O_3 flame retardance system , the flame retardance property of glass fibre reinforced PET could reached the grade of UL 94 V-0 .

  30. 本文主要研究玻纤增强阻燃聚对苯二甲酸乙二醇酯(PET)和聚对苯二甲酸丁二醇酯(PBT)工程塑料的综合性能。

    This thesis mainly discusses the performance of the glass fiber reinforced and flame retarded polyethylene terephthalate ( PET ) and polybutylene terephthalate ( PBT ) engineering plastics .