玻璃纤维增强复合材料

利用Hopkinson杆加载装置，对带有单边切口的炭纤维增强复合材料（CFRP）及玻璃纤维增强复合材料（GFRP）层板试件进行冲击拉伸加载实验。

The CFRP and GFRP laminates with a crack on a single side are loaded under tensile impact by the apparatus of Hopkinson bar .

本实验通过适量加入增韧剂和增容剂，较大提高了挤出的复合材料丝的韧性及力学性能，从而使制备出的短切玻璃纤维增强复合材料适用于熔融沉积制造（FDM）工艺。

The toughness and mechanical properties of the resultant composite filament from injection molding machine are improved so as to be used for FDM ( Fused Deposition Manufacturing ) process .

近几年由于钢筋锈蚀所导致的桥梁面板结构功能退化的问题变得日益严重，而采用玻璃纤维增强复合材料（GFRP）代替钢筋被证实为一种有效解决途径。

In recent years , deterioration of reinforced concrete bridge deck slabs caused by corrosion of reinforcement has become increasingly evident . Glass Fiber-Reinforced Polymers ( GFRP ) is developing to be promising alternative reinforcement construction materials as an effective solution of corrosion problems .

玻璃纤维增强复合材料抗爆容器的研究进展

Research Progress Survey of Anti-explosion Container Twined with Fiberglass Reinforced Composite

研究了基体模量对玻璃纤维增强复合材料单向板各项性能的影响。

The influence of matrix module on the properties of composite is studied .

玻璃纤维增强复合材料的损伤分析

The Damage Analysis for Glass / Epoxy Composites

玻璃纤维增强复合材料在汽车上的应用

Application of Glass Fiber Reinforced Composites in Automobiles

玻璃纤维增强复合材料筋材连接试验研究

Experimental study of glassfiber reinforced polymer bar joint

对碳纤维增强复合材料和玻璃纤维增强复合材料进行了验证试验。

Experimental verification for carbon fiber enhanced composite and fiberglass enhanced composite have been done .

聚苯硫醚及其玻璃纤维增强复合材料力学性能研究

Study on the mechanical properties of continuous glass fiber reinforced poly ( phenylene sulfide ) Composites

紫外线对玻璃纤维增强复合材料力学性能的老化研究

Research on the effect of UV radiation to the mechanical properties of glass fiber reinforced composites

玻璃纤维增强复合材料材料性能及加固受弯钢构件试验研究

The Experimental Research on Material Behaviors of Glass Fiber Reinforced Plastic Sheet and Steel Beam Strengthened with GFRP

最后，用已确定的、制备出浇注体性能最佳的有机粘土用量及工艺组合，制备出粘土改性的热固性树脂基玻璃纤维增强复合材料，并对其性能作以考察。

In the last , we prepared clay-modified composites of fiber glass build - lipping thermo hardening resin matrix .

在介电性能的研究中，芳纶纤维增强复合材料的介电常数低于玻璃纤维增强复合材料，而介电损耗却高于玻璃纤维增强复合材料。

The aramid fiber composite showed a lower dielectric constant and a higher dielectric loss than the glass fiber composites .

本文所研究的陶瓷复合装甲由铝合金、玻璃纤维增强复合材料（玻璃钢）、抗弹陶瓷三种材料复合而成。

The ceramic composite armor related to this thesis is composed of aluminum alloy , glass fiber reinforced composite and engineering ceramics .

以碳纤维增强复合材料和玻璃纤维增强复合材料为例，分析说明了纤维增强复合材料在桥梁工程中的应用形式和应用方法。

Based on the examples of carbon fiber reinforced plastics ( CFRP ) and glass fiber reinforced plastics ( GFRP ), the fiber reinforced composites application form and method in bridge engineering were analyzed .

复合材料在当今经济飞速发展的时代，已经成为国民经济和人们日常生活中必不可少的重要材料，其中以玻璃纤维增强复合材料的研究最为完善，其应用领域也最为广泛。

Nowadays , composites already are indispensable material in national economy and daily life , and the research of glass fiber reinforced composites is the most perfect , at the same time the application of composites reinforced glass fiber is also most broad .

6%份润滑剂可进一步改善玻璃纤维增强ABS复合材料的流动性。

Adding 0.4-0.6 % lubricant can improve the fluidity of GF / ABS composite reinforced .

利用自行研制的漫润装置，采用一体化结合的工艺路线制备长玻璃纤维增强PET复合材料。

A new method was used to prepare long glass fiber reinforced PET thermoplastic composite with a self-made impregnating device .

加入2%的抗冲改性剂可以提高玻璃纤维增强ABS复合材料的冲击强度。

Adding 2 % anti-impact modifier can strengthen the impact stress of GF / ABS composite reinforced .

稀土元素对玻璃纤维增强PTFE复合材料拉伸性能的影响

Effect of Rare Earth Elements on Tensile Properties of Glass Fiber Reinforced PTFE Composites

玻璃纤维增强PEEK复合材料成型工艺研究

Studies of the processing conditions of glass fibre reinforced PEEK composites

本文成功制备了玻璃纤维增强聚丙烯复合材料，并对复合材料进行了力学分析，SEM和DSC分析。

This article successfully prepared glass fiber reinforced polypropylene composite materials , and analysis in mechanics , SEM and DSC .

加入0.05%的抗氧剂可以提高玻璃纤维增强ABS复合材料的使用寿命，降低玻璃纤维增强ABS复合材料的黄色指数；

Adding 0.05 % and-oxidant can prolong service life of GF / ABS composite reinforced , lower the yellow quota of GF / ABS .

润滑剂TAF对玻璃纤维增强PBT复合材料性能的影响

Effects of Lubricant TAF on Properties of Glass-fiber-reinforced PBT Blends

ABS树脂是影响玻璃纤维增强ABS复合材料性能的重要因素，利用ABS接枝粉料和SAN共混可以制得性能优异的复合材料；

ABS resin is a main facter of performance of GF / ABS composite reinforced , we can get excellent composite by compounding ABS graft powder with SAN .

因此所合成的ACR是一种有效的PVC抗冲改性剂。加入2%的抗冲改性剂可以提高玻璃纤维增强ABS复合材料的冲击强度。

So the ACR is an effective modifier for improving impact strength of PVC . Adding 2 % anti - impact modifier can strengthen the impact stress of GF / ABS composite reinforced .

基于前面对挤出工艺条件对短玻璃纤维增强ABS复合材料力学性能及流动性能的研究，本文选择挤出温度为225℃，螺杆转速为60r/min；

Making use of the conclusion about the influence of the extrusion processing conditions on mechanical property and flowability of short glass-fiber reinforced ABS , extrusion temperature of 225 ℃ and screw revolution speed if 60r / min was chosen in this paper .

本文利用在线溶液浸渍法制备预浸带，采用原位固结的方式进行连续玻璃纤维增强PEK-C复合材料的缠绕成型工艺研究。

In this paper , the winding process technology was studied by using in-situ consolidation combined with on-line solution impregnation for glass fiber reinforced PEK-C composite .

混纤纱法制备连续玻璃纤维增强聚丙烯复合材料

Study on Continuous Glass Fiber Reinforced Polypropylene Composite with Commingled Roving