环烷油

利用等高线可预测胶料的性能，通过调整配方中轻质碳酸钙和环烷油的用量，可选出能满足性能指标要求的胶料配方，达到调节EPDM硫化胶某些性能的目的。

The physical properties of EPDM vulcanizate could be predicted by isohypse , and the required physical properties of EPDM vulcanizate could be obtained by adjusting the loading levels of light calcium carbonate and naphthenic oil in the formula .

研究了填充高芳烃油和环烷油对充油顺丁橡胶性能的影响。

The influence of the filled Aromatic oil and Naphthenic oil on the properties of the oil extended polybutadiene rubber was studied .

以大港油田炼油厂生产的10种环烷油作填充油，国产SBS为基础胶，从工艺条件，油品质量及其对充油SBS性能的影响方面对填充油进行了评选。

Ten grades of naphthenic oils produced by Dagang Oil refinery were evaluated as extender oil for domestic SBS thermoplastic elastomers .

某些环烷油甚至归入了MES类，在橡胶工业制品部门，对产品选择的自由度更大一些，可能还未能充分利用环烷油的优点。

Some naphthenic oils are even classified as MES . In the industrial rubber segment , where the freedom in product choice is greater , the full utilization of the naphthenic advantages may be had .

试验证切，10种环烷油均可作SBS填充油，其中8~、9~两种油具有色浅，稳定性好的特点，而且与SBS有较好的相容性。

All the ten grades of oils are suitable to be used as extender oil , and among them grade 8 and 9 oils possess the characteristics of light colour and good stability as well as relatively good compatibility with SBS thermoplastic elastomers .

在最常用的工业用橡胶中，对比了环烷油与芳烃油和石蜡油的性能。

The performance of naphthenic oil in the most common industrial rubber types is compared with that of aromatic and paraffinic oil .

结果表明：填充高芳烃油比填充环烷油的橡胶的拉伸强度、伸长率、生胶门尼略高，定伸应力略低；

The results showed that the tensile strength , elongation at break and Mooney of the filled Aromatic oil rubber were a little higher than that of the filled Naphthenic oil rubbber , but the 300 % moduls was a little lower .

在研究IS热稳定性的过程中，对用三种稳定剂所制备的IS进行充环烷油、脂肪烃油、芳烃油处理，比较了工艺油的品种和稳定剂的协同作用对IS的受热影响。

The thermal stabilities of the IS treated by different oils , such as the naphthenic oil , paraffinic oil and arene oil , were studied separately , and the synergistic effects of processing oil types and stabilizers on the thermal stability were compared .

改进方法是：先将不溶性硫磺粗品用CS2萃取，然后与环烷基油按质量比1：（10～12）混合，加热到60～70℃，恒温搅拌30min后抽滤。

The measures include extracting the crude insoluble sulfur with CS_2 , mixing with paraffin oil in the proportion of 1 : ( 10-12 ), heating to 60-70 ℃ and agitating for 30 min at this temperature , and then extruding . Compared with the traditional method , i.

环烷基油磺酸盐驱油剂的制备及其应用研究

Study of Preparation and Application of Naphthenic Petroleum Sulfonates for EOR

以环烷基油调合压缩机油的研究

Study of Blending Compressor Oil from Naphthenic Base Oil

环烷基油&一种理想的橡胶增塑剂

Naphthenic Oil & Ideal Plasticizer for Rubber Industry

渗铝钢在高温环烷酸油中的耐腐蚀机理研究

Mechanism on Corrosion Resistance of Aluminized Mild Steel in Hot Oil Processing Containing Naphthenic Acid

环烷基油在变压器中的应用

Application of Naphthenic Base Oil to Transformer

胶乳的门尼粘度越高，填充相同份数环烷烃油后其充油橡胶的门尼粘度也越高。

The Mooney viscosity of oil-extended rubber extended same amount of cycloalkyl oil increased with the increases of the Mooney viscosity of latex .

全氢工艺生产优质环烷基润滑油

The production of premium naphthene - base lube oil with hydrogen technique

丁苯橡胶环烷系填充油的研究

Study on naphthene series extender oils for styrene-butadiene rubber

环烷基橡胶油的光稳定性与热稳定性改进研究

Studies on Improvement of Light and Heat Stability of Naphthenic Rubber Process Oil

环烷酸脱油工艺的实验研究

Study on the Naphthenic Acid Deoil in Lab

液相脱氮-白土精制工艺应用于环烷基润滑油生产

The production of naphthenic base lube oil with liquid phase DENITROGENATION-CLAY refining combined process

石蜡基和环烷基变压器油的性能比较

Characteristic Comparison between Paraffine-Base and Naphthene-Base Transformer Oils

20万吨/年环烷基馏分油加氢装置设备平面布置设计

Design of Equipment layout for 200 kt / a Naphthenic Base Fraction Hydrogenation Unit

我国环烷基润滑油基础油

Naphthenic base lube base oil in China

发现以酯类油与环烷基矿物油的混合油做基础油时，合成的锂基脂具有较好的噪声特性。

To find that mixture of naphthenic mineral oil and ester oil as base oil , the grease has a proper noise character .

本文就环烷基润滑油馏分性质和各工艺对产品的加工特点进行论述，阐述环烷基原油加工润滑油基础油的工艺特性，对环烷基原油生产润滑油产品具有一定的指导意义。

The properties of naphthenic base lube oil distillates and processing characteristic of products are discussed . It is helpful for producing lube oils with naphthenic base crude oil .

但是环烷基橡胶油在使用过程中，逐渐暴露出高压加氢所共有的缺点：光、热稳定性差。

But , during the use of naphthenic robber process oil , the common disadvantage of high-pressure hydrotreatment process has gradually emerged , that is , bad light & heat stability .

针对环烷基变压器油的吸水问题，用干燥的气体对储油罐内的变压器油采取了保护措施，并用真空滤油机对已吸潮的变压器油进行真空脱水处理，提高了变压器油的质量。

To solve the problem of absorbing water , drying gas is used to protect naphthene base transformer oil in storage tank , The vacuum dewatering process from moisture-bearing transformer oil is carried out by vacuum oil filter . The quality of the oil is improved .

10B高级环烷型橡胶填充油研究及工业试生产

Study on premium 10B naphthenic type rubber filling oil and its industrial trial-production

环保型环烷基胶粘剂专用油

Kg series environment-friendly naphthenic base softening oil specially used for adhesives

高碱度环烷酸镁润滑油清净剂的合成超高碱值环烷酸镁研制

Synthesis of Highly Alkaline Magnesium Naphthenate THE DEVELOPMENT OF THE MAGNESIUM NAPHTHENATE WITH SUPER-HIGH BASE NUMBER