淬火油

菜籽油基生态淬火油的研制

Environmentally friendly quenching oil based on rapeseed oil

对已发生变质和老化的淬火油进行再生，可以恢复其使用性能，延长其使用寿命。

Degenerated and aginged quenching oil was reformed , its service property can be resumed and service life can be prolonged .

结果表明，淬火油的淬火烈度H值与建立在冷却曲线基础上的硬化能力HP值均随介质流速的增加而增加，二者增加的斜率相近。

The results show that the values of hardening capacity and quench severity increase in similar slope with the raise of flow rate .

淬火油污垢处理技术及应用

Treatment Technology and Its Application for Quenching Oil Dirt

以专用淬火油取代机械油提高零件淬火质量

Improving quenching quality of parts by replacing machine oil with special quenching oil

68~淬火油的改性及应用

Modification and application of 68 ~ # quenching oil

通道式分级淬火油槽及45钢淬火工艺

Quenching Technique of 45 Steel by Tunnel quenching Tank

提高淬火油使用寿命的措施

Measures on Improving Life of Quenching Oil

热处理车间淬火油着火和气体爆炸原因分析及安全措施

Analysis and Safety Measures on Quenching Oil Firing and Gases Exploding in Heat Treatment Workshop

淬火油复合添加剂研究

Study on the quenching oil package

用专用淬火油取代机械油提高零件内在质量的技术经济分析

Cost-effectiveness Analysis of Using Special Quenching Oil instead of Machine Oil to Improve Internal Quality of Parts

淬火油概述

General Outline of Quenching Oil

油中含有水分是对淬火油正常工作的最大危害，也是造成火灾的隐患。

Containing water in quenching oil not only affects its normal performance but exerts danger of fire .

淬火油的再生处理

Regeneration of Quenching Oil

然而，开发、生产及使用植物油基淬火油等绿色淬火介质势在必行。

However , it is imperative to develop , produce and apply vegetable oil based quenching oil and other green quenchants .

提出了用被迫对流和超声波振动同时作用于淬火油槽的方法。

The author suggests that forced convection and ultrasonic wave vibration should be employed simultaneously to exert a coaction on the oil trough .

为了控制冷却淬火油的温度，在淬火油槽中加装了冷却用蛇形水管。

In order to control coolling quenching oil temperature , the cooling device of snake-shaped water pipe was installed in the quench tank .

试验研究表明，用涡流喷射器作用淬火油槽，可显著提高油的冷却能力。

It has been proved that with the vortex spray applied to the oil trough , the oil cooling ability will be improved remarkably .

本文对在淬火油槽内用超声波振动提高油冷却能力的试验进行了研究。

This paper deals with the experimental study of improvement on the oil cooling ability by producing ultrasonic wave vibration in the quenching oil trough .

通过加氢处理、改进添加剂配方及废油再生可以减少矿物油基淬火油对环镜的危害。

The harm of mineral oil based quenching oil to environment can be weakened through hydrogenation , improvement on addition component , and regeneration of wasted oil .

论文就热处理车间淬火油着火原因进行了分析，同时，提出了改进及防护措施。

In this paper , the fire causes of quenching oil in heat treatment workshop were analyzed , the improved and protective measures were proposed at the same time .

以一个全封闭恒温车间内热处理油烟的收集与净化为例，介绍了井式淬火油槽和井式回火炉中所产生油烟的收集与净化方法。

A method for gathering and purifying the oil smoke which was produced by oil quenching tanks and tempering in the whole-sealed and constant-temperature heat treatment plant was introduced .

介绍了淬火油稀土催冷添加剂的合成与调合工艺以及对淬火油理化性能、冷却性能和淬火工艺性能的影响。

This paper deals with the technological routines of RE additive on quenching oil , and the effect of RE additive on physicochemical properties , cooling properties and processing performance .

评估了水、10%的水溶性聚合物溶液以及常规淬火油对碳氮共渗件的淬火性能，并比较了经各种介质冷却后的淬火态和调质态的显微组织。

Water , 10 % aqueous polymer solutions and a conventional quench oil were evaluated to harden carbonitrided parts . The resulting as-quenched and quenched and tempered microstructures were compared .

介绍了我国近年来研制的不同牌号和需要的专用淬火油在不同行业上的应用，取得的经济效益和社会效益。

The application of special quenching oil of different grades and requirements to different trades , which is formulated in recent years , and obtained economic benefit and social benefit were described .

该清洗机利用淬火油等挥发性液体减压后沸点下降，和油、水、水蒸气等一起加热，其沸点亦下降的原理进行清洗。

The principle of the vacuum washing technology is based on the boiling point of volatile liquid like quenching oil will decrease by decompression and by heating with water and other organic liquid .

加热后分别采用自来水、淬火油、流动空气及炉内静止空气冷却等不同冷却方式，对1420铝锂合金进行固溶，随后再进行时效处理。

During the solution-aging treatment of 1420 Al-Li alloy , four different mediums including room temperature water , quenching oil , moving air and still air in furnace were used to produce different cooling rate .

表面感应加热淬火抽油杆残余应力衰减的研究

Investigation in attenuation of residual stress on surface induction hardened sucker rods

并探讨ITQS就水溶性聚合物淬火剂代油的应用和原理。

This paper will discuss the principles and application of ITQS to replace oil with aqueous polymer quenchants .

新型水溶性淬火介质替代油淬火冷却的应用效果

Applied Effect of New Medium Substitution for Quenching Oil