液晶模块

而大多数液晶模块一般采用并行数据总线接口，占用主控制器的I/O端口较多。

But a mass of LCM always adopt parallel data bus interface , so the master controller must have many I / O ports to connect it .

基于Proteus的液晶模块仿真

Simulation of LCD Module Based on Proteus

基于DSP和CPLD的液晶模块的设计

The Design of Liquid Crystal Module based on DSP and CPLD

给出了利用FPGA实现驱动液晶模块的方法以及数据存储与处理模块等的设计方法。

The method of driving liquid crystal module is given and data storage and data processing modules are realized by FPGA .

采用LCD液晶模块显示参数，系统显示的信息量显著增加；

It adopts the LCD to display the parameters , which makes the amount of informations of the system to increase obviously .

TFT液晶模块驱动电路设计

Driving Circuit Design of TFT Liquid Crystal Module

显示模块我们采用串行的液晶模块通过RS232接口和DSP相连，实现测量数据的实时显示。

We connect the LCD display module with the DSP through the RS232 interface and achieve the real time display of the data that we measure .

针对主要的电路进行了设计和分析，其中包括ADC电路、电机驱动电路、信号处理电路、键盘输入电路、MCU与液晶模块接口电路、单片机与上位机的接口电路等。

And main circuits are analyzed and designed : AD circuit , motor-driving circuit , signal-processing circuit , keyboard-input circuit , interface circuit of MCU and LCD .

在市场上逐步推广的液晶模块（LCM）生产中，其LCD系列驱动电路的封装工艺主要采用裸芯片的COB（chiponBoard）封装方式。

In mass production of LCD module under widely developed market , the assembly process of LCD drive circuits is based on COB ( Chip on Board ) technique .

本文主要介绍了一种应用微电子技术开发数字式波形记录仪的方案，并采用32位浮点DSP、容量非易失性SRAM和彩色点阵图形液晶模块等技术成功地研制了便携式数字波形记录仪的样机。

This paper mainly introduces a new design of digital waveform recorder developed by using micro-electronic technique . This recorder adopts many new techniques , such as 32-bit floating-point DSP , large volume nonvolatile SRAM and color LCD display module .

系统由80C196KC单片机、HD61202液晶模块和矩阵键盘电路组成。

This system is composed of80C196KC SCM , HD61202 LCM and matrix keyboard circuit .

本文介绍了流量计中微处理器以软件模拟方法产生SPI信号与液晶模块通信的过程，以及用显示缓冲实现多参数显示的处理方法。

In this paper , the communication process between microprocessor and LCD module is introduced . The microprocessor uses software simulation method to generate SPI signal . Meanwhile , display buffer is used to achieve multi-parameter display .

文中介绍了一种DSP控制器的设计方法，用于对内藏T6963C控制器液晶模块进行字符图形显示控制。

In this paper , A design method of DSP controller is introduced , which controls the LCD module containing the T6963C controller to achieve the display of the characters and graphics .

以MSP430单片机为控制器搭建了用于手机供电的DMFC混合电源系统，通过液晶模块和RS232串口将各工作参数显示并上传到上位机。

The DMFC hybrid power source powering mobile phone is established with MSP430 single-chip microcomputer as the controller . Meanwhile , the working parameters is displayed by LCD module and sent to computer through RS232 serial port .

同时，对OCMJ液晶模块与单片机的双线握手协议进行了研究。

Meanwhile , this design researches into the double-line hand-shaking protocol between the OCMJ LCD module and the single ship computer .

图形点阵液晶模块的中文菜单界面的实现

Realization of Chinese menu interface based on graphic dot matrix LCD

振动信号波形在图形型液晶模块上的实现

Realization of the Vibration Signal Wave Display on Graphics LCD

采用点阵图形液晶模块的信号曲线显示

Display of Signal Curve Using Lattice Graphics LCD Module

液晶模块在称重控制系统中的应用及菜单的实现

The Application of LCD module in Weighing System and the Implement of Men

对液晶模块快速刷新的改进

Quick ; Improvement of Rapid Refreshing LCD Modules

小点阵汉显液晶模块及其应用

Little Lattice Chinese LCD Module and Its Application

中小规模点阵图形式液晶模块电路的分析和设计

Analysis and design of dot matrix graphic LCD module circuits of middle and small size

汉字库图形点阵库液晶模块在激光告警接收机中的应用

Application of Liquid Crystal Display Module with Chinese Graphical Lattice Stock to Laser Warning Receiver

液晶模块的接口扩展

Interface Expand of Liquid Crystal Module

其中涉及液晶模块的改造与使用、控制电路和控制软件的实现等多方面问题。

It relates to alteration LCD module , Implementation of driving and control circuit , and also their software implementation .

采用点阵液晶模块显示有效地增强了智能仪表的输入输出功能。

The function of input and output in the intelligent instruments is enhanced greatly with the use of dot matric LCD module display .

在单片机软件编程方面，采用结构化程序设计方法，完成了单片机系统中各模块的初始化，使其能正常工作，并着重优化液晶模块显示算法。

In the single-chip microcomputer software programming , it used structured programming methods to complete the initialization of each module in the single-chip microcomputer system .

通过该设计，只需改变图像模值即可实现任意静态图像的显示，为液晶模块与单片机的接口设计以及实现图像显示提供了好的思路。

According to the design , only change the graphic matrix value , the circuit can display arbitrarily static graphic , which provide idea for the display of static graphic and the interface design of LCD and single-chip microcomputer .

从软、硬件方面介绍了嵌入有控制芯片的点阵式液晶模块在煤矿突出预测仪器中的应用设计和实现方法。

This paper , from the aspect of software and hardware , gives a description of the application design and realizing method of the lattice LCD module inserted with control chip in the outburst predictor used in coal mines .

创建的通用模块成功实现了流量仪表从英文显示到中文显示的升级，将原来基于字符型显示模块直接替换成基于点阵式液晶模块显示。

By using this module , English display of flow meters can be upgraded into Chinese display ; the display module based on character type can be directly replaced to display module based on dot matrix type liquid crystal display .