涤纶短纤维

关于国外几种涤纶短纤维油剂性能的评价

Properties and function of a few foreign finishing oils for polyester staple fibre

在大量实验的基础上，对国外几种涤纶短纤维油剂的本身性能及使用性能进行了评价，为化纤生产厂家了解进口油剂的性能，从而更好地消化吸收国外先进技术提供了参考。

Properties and function of a few foreign finishes for polyester staple fibre were appraised on the basis of plenty of experiments .

本系统通过I/ASeries、变频器、压力变送器等设备来实现涤纶短纤维纺丝生产的自动控制。

The automatic control of staple spinning process was realized by using I / A series , inverter and pressure transmitter etc.

PROFIBUS现场总线技术在涤纶短纤维生产装置上的应用

Application of PROFIBUS Site Bussing Technique in Producing Plant of Polyester Staple Fiber

150t／d涤纶短纤维装置增容改造探讨

Discussion of capacity expansion of 150 t / d PET staple fiber plant

14.6texCoolmax涤纶短纤维与棉混纺纱的生产实践

Production practice of 14.6 tex Coolmax polyester staple fiber and cotton blended yarn

并将Modal纱与粘胶纤维、棉纱、涤纶短纤维纱的物理指标进行了测试对比，还对Modal混纺织物的服用性能进行了测试研究。

The physical indexes of Modal yarn , mucilage glue yarn , cotton yarn , and terylene yarn were tested and compared . And the clothing character of Modal mixed spinning fabric was tested and studied .

用红外光谱ATR法研究了涤纶短纤维的皮芯结构，断裂伸长及老化过程。结果表明：纤维表面与内部只有微小差异；

This paper describes the study of skin core structure , break stretch and ageing of PET cut fibre using ATR of infrared spectroscopy .

HEK型涤纶短纤维油剂的研制与应用

Preparation and application of HEK type finish for Polyester Staples

用其对全棉色织物及三维卷曲涤纶短纤维进行柔软整理，并与进口柔软剂作了比较，表明CO系列柔软剂有较好的应用前景。

The CO series were applied to the softening finish of cotton colour fabrics and tri-dimentional curly shot polyester fiber , and comparisons of CO series with imported softeners were made . The results showed the CO series had a bright future of application .

应用FRS-XRSA、SAXS、DMA等研究了涤纶短纤维在纺丝及后处理过程中的结晶、取向与超结构的形成与变化。

The formation and the change of crystallinity , orientation and super structure of PET fiber during the spinning process were investigated by mean of FRS XRSA , SAXS and DMA .

阳离子可染涤纶短纤维油剂TDY-3的研究及应用

Research and Application of Oiling Agent TDY-3 for Easy Cationic Dyeable PET Staple Fiber

XQ-1B强力仪在测定涤纶短纤维及初生纤维中的应用分析

Application Analysis of XQ-1B Tensile Tester in PET Staple As-spun Fiber

在聚酯熔体中，加入质量分数为0.15%的有光添加剂HB生产1.33dtex细旦有光涤纶短纤维，探讨了其纺丝及后加工工艺对产品质量的影响。

A fine-denier lustrous PET staple fiber of 1.33 dtex can be prepared by adding 0.15 % lustrous additive HB by mass fraction into PET melt . The effects of spinning and after-processing conditions on the product quality were discussed .

通过广角X射线衍射（WAXD），分析了15kt/a涤纶短纤维后加工生产线纤维力学性能的形成过程；对后加工缠辊原因进行了探讨。

By means of WAXD , the fiber mechanical Properties formed in a 15 kt / a draw treatment line of PET staple fiber has been studied and try to find out why the draw roller is winded round in draw treatment tentatively .

利用现有涤纶短纤维生产设备，使用壳牌化学公司聚对苯二甲酸丙二酯（PTT）切片原料成功纺制了1.67dtex×38mm短纤维，纤维强度3.0cN/dtex，伸长73.1%。

Using Shell Company 's chips as raw material , the PTT staple fiber of 1.67 dtex × 38 mm was produced by existing PET production line . The break strength and elongation of the fiber were 3.0cN/dtex and 73.1 % respectively .

本文依托仪化公司引进吉玛150t／d涤纶短纤维生产线，在消化吸收引进技术的基础上，进行纺丝装置170t／d增加生产能力技术研究。

Relying on the 150t / d polyester stable fiber line of ZIMMER AG which YIZHENG CHEMICAL FIBRE CO. LTD fetched in , and after digesting and absorbing it 's technology , the article make a study of technique increasing the production to 170t / d.

仪化公司现有的直接纺涤纶短纤维生产线是80年代初建成投产，单线设计生产能力为50t／d，经过多年增容改造，生产能力已达60t／d。

The staple fiber lines of the company have set up at the beginning of 80 's , the design throughput of the single line is 50 t / d , the actual throughput of the single line already increased to 60 t / d by reforming for years .

三维卷曲四孔涤纶短纤维生产工艺探讨

Discussion on the technology of threedimensional crimp hollow PET staple fiber

活性炭改性涤纶短纤维的研发及应用

Development and Application of PET Staple Fiber Modified by Active Charcoal

涤纶短纤维含油率测试方法的比较

Determination method comparison for finish oil content of PET staple fiber

涤纶短纤维强度变异系数的影响因素

Effective factors on the strength variable coefficient of polyester staple fiber

油剂对有光缝纫线型涤纶短纤维可纺性的影响

Influence of finish on spinning performance of polyester bright sewing yarn

涤纶短纤维生产过程是一个典型的流程工业生产过程。

Polyester staple fiber production is a typical processing production process .

涤纶短纤维牵伸机传动齿轮强度的验算

Calculation of driving gear strength for PET staple fiber drawing machine

纺制0.56dtex涤纶短纤维的喷丝板选用

Spinneret selected for spinning 0.56 dtex fine denier PET staple fiber

影响涤纶短纤维干式拉伸工艺拉伸点位置的因素

The factors affecting the point-of-stretch of PET staple dry drawing process

热定型条件对涤纶短纤维结构性能的影响

The effect of fiber structure and property on heat treatment condition

涤纶短纤维卷曲机常见故障的分析

Analysis of common malfunctions of crimping machine for PET staple fiber

涤纶短纤维生产线前后纺生产能力的调整方法

Comprehension of the capacity adjustment on polyester staple fiber production line