浇注

jiāo zhù
  • teeming;pour;trumpet bell
浇注浇注
浇注 [jiāo zhù]
  • [pour] 把熔融金属、混凝土等注入模具

  • 浇注水泥板

浇注[jiāo zhù]
  1. CO2在炼钢与浇注上的应用

    Application of CO_2 to steel making & teeming

  2. 浇注后10min,模角附近λ有最大值。

    There is a maximum λ in vicinity of the mould corner at 10 min after teeming .

  3. 他把全部心血都浇注在事业上。

    He put his heart and soul into advancing the cause .

  4. 铸造工艺CAD浇注系统的研究与开发

    Research and Development in Gating System of Casting Processing CAD

  5. 通用型浇注系统CAD模块的开发

    Development of Pouring System CAD Model in Common Use

  6. 浇注温度对定向凝固Al-Cu合金热裂的影响

    Influence of Casting Temperature on Hot Cracking of Directionally Solidified Al-Cu Alloys

  7. CAD在铸钢件浇注系统上的应用与研究

    The Research and Application of the CAD on the Gating Systems of Steal Castings

  8. 基于UG的铸钢件浇注系统CAD二次开发

    CAD Secondary Development of Gating System for Casting Steel Based on UG

  9. MgO/Al2O3比对铝镁浇注料性能的影响

    Effect of MgO / Al_2O_3 ratio on properties of alumina-magnesia castable

  10. 利用SEM分析手段研究了铝镁浇注料的抗渣性能。

    The slag corrosion resistance of the Al_2O_3-MgO castable is investigated by SEM analysis method .

  11. ρ-Al2O3结合浇注料的研究

    Research on ρ - al_2o_3 bonded castable refractories

  12. LF精炼钢包用铝尖晶石浇注料的研制与应用

    Development and application of alumina spinel castable for LF refining ladle

  13. 大型注射模浇注系统CAE

    CAE of the Running System of Large Injection Mould

  14. 含Cr2O3刚玉质浇注料

    Cr_2O_3 containing corundum based castables

  15. RH插入管刚玉-尖晶石浇注料研制与应用

    Development and Application of Corundum - Spinel Pouring Material for RH Inserting Tube

  16. 基于CAE分析的汽车齿轮室浇注系统的优化

    Optimization of Gating System for Gear Box of the Car Based on CAE System

  17. 分散剂和促凝剂对Al2O3-SiC-C浇注料流动性能的影响

    Effect of dispersants and accelerators on flowability of Al_2O_3-SiC-C based castable

  18. SiAlON对MgO基浇注料高温性能的影响

    Effect of SiAlON addition on high temperature property of magnesia-based castables

  19. 浇注温度对亚共晶Al-Si合金组织和硬度的影响

    Effects of Pouring Temperature on Microstructure and Hardness of Hypoeutectic Al-Si Alloy

  20. 它是指将计算机模拟与X射线实时观察相结合,进行铸件浇注系统优化设计的新技术。

    Combining the computer simulation with X-ray real time observation , view-cast is a novel technique used for optimizing design of filling system .

  21. 基于CAE分析的电脑外壳压铸模浇注系统的设计

    Design of Gating System for Die Casting die of Magnesium Computer House Part Based on CAE Analysis

  22. 高炉出铁沟用Al2O3-SiC-C浇注料流动性和流动性衰减的研究

    Effect of microsilica on flowability and flow decay of Al_2O_3-SiC-C castables for BF trough

  23. 采用新型X射线荧光光谱仪(岛津XRF&1700)的区域分析功能对钢包浇注料用后残块的元素分布进行了检测。

    The element distribution of used ladle castable has been determined by a new type of X ray fluorescence spectrum analyzer using its area analyzing function .

  24. CAE技术在塑件浇注系统设计与工艺参数优化中的应用

    Application of CAE Technique in the Design of Runner System and the Optimization of Technological Parameters in Plastic Forming

  25. 针对注射模非平衡浇注系统的特点,提出了利用BGV值计算浇注系统的平衡加CAE辅助分析相结合的设计方法。

    A design method applying CAE technology and balanced gate value to calculate the runner system balance was put forward .

  26. 莫来石结合Al2O3-SiC浇注料的显微结构特征

    Microstructure characteristic of mullite bonded Al_2O_3-SiC castable

  27. 不同外加物对喷枪浇注料性能的影响:高膨胀骨料可以改善浇注料的热震性等,本试验结果证明红柱石和SiC的引入效果较好。

    Test results on the influence of different additives on castable performance of spray gun shows that andalusite and SiC will improve thermal shock resistant .

  28. 同时,在悬臂浇注的PC斜拉桥施工控制中,立模标高很容易受到多方面因素的影响,特别是中间索力和前支点挂篮对立模标高的影响不容忽视。

    Meanwhile , the formwork placing elevation is influenced by several factors , especially the influences caused by mid cable force and preceding fulcrum traveling carriage cannot be ignored .

  29. 填充型弹性聚氨酯IPN绝缘冷浇注树脂的合成及性能

    The synthesis and properties of filled polyurethane IPN elastomer as insulating casting & resin

  30. 但活性αAl2O3微粉对浇注料的施工性能不利,且施工温度越高,其影响越显著。

    However , the active α Al 2 O 3 micro powder is not beneficial to the working performance of the castable .