氟橡胶

气相白炭黑对氟橡胶/硅橡胶共混胶性能的影响

Effect of Fumed Silica on Properties of FKM / MVQ Blends

氟橡胶在尽可能小的直径密封-减少摩擦和热量积聚，提高效率，并允许连续工作，无需额外的冷却操作。

FKM seals for the smallest possible diameter & reduces friction and heat build-up , increases efficiency , and allows continuous duty operation without additional cooling .

耐N2O4新型羧基亚硝基氟橡胶密封材料性能研究

Study on Sealing Properties of New N_2O_4 Resistance Carboxy Nitroso Fluororubber

氟橡胶F（2314）黏结剂的热分解动力学

Thermal Decomposition Kinetics of F_ ( 2314 ) Bonder

研究了双酚AF硫化体系对氟橡胶硫化特性的影响。

Effect of Bisphenol AF vulcanizator system on the vulcanizing property of fluoro rubber was studied .

对硫化剂双酚AF，促进剂BPP在氟橡胶中的应用进行了研究。

The application of curing agent bisphenol-AF and accelerator BPP to fluorine rubber was investigated .

氟橡胶硫化促进剂BPP的应用试验

Application Test of Accelerator BPP for Fluoro Elastomer

，因此，在多因素影响氟橡胶老化的条件下，灰色非等距GM（1,1）预测模型更为精确。

Therefore , the prediction results of the grey non-equidistant GM ( 1.1 ) model are more accurate in complex conditions where there are many factors affecting the lifetime of the sealing rubber .

研究了硫化剂双酚AF、促进剂BPP用量及硫化温度对氟橡胶硫化特性的影响。

The effect of the levels of bisphenol AF and BPP and the cure temperature on the cure characteristic of fluorine rubber was investigated .

TAIC作为过氧化物交联或自由基反应交联的助交联剂被广泛应用，如氯化聚乙烯（CPE），EPDM，氟橡胶等等。

TAIC is widely used as a coagent for peroxide crosslinking or radiation crosslinking of Chlorinated Polyethylene ( CPE ) EPDM Fluroelaster and so on .

使用的原料有硅橡胶、氟橡胶、天然橡胶、氯丁橡胶、三元乙丙橡胶、丁基橡胶、聚氨脂橡胶、聚乙烯、聚丙烯、EVA、ABS、PP、PVC等。

The main materials we used are including silicone rubber , fluorubber , natural rubber , neoprene rubber , EPDM , butyl rubber , polyurethane , polyethylene , EVA , ABS , PP , and PVC .

结果表明采用偶联技术能够改善TATB造型粉的力学性能和氟橡胶对TATB的粘附。

The result shows that the capability of fluorine rubber bonding TATB and the mechanical properties of TATB molding powder were improved by coupling method .

对四氟化乙丙橡胶（TP－2）和氟橡胶（FKM－246G）进行了耐280℃水蒸汽试验。

A test is made on the tetrafluoroethylene-propylene rubber ( TP-2 ) and fluro rubber ( FKM-246G ) which resist the steam at the temperature of 280 ℃ .

分析了在役三通阀密封失效的原因，采用X树脂材料制作球阀垫片、在阀体与阀盖间车制梯形沟槽并放置氟橡胶O形密封圈等措施对其进行改造。

Influential factors leading to losing efficacy of the three way valve are analyzed , and some remaking measures are employed , including ball valve shim made from X resin , fluorubber O shaped seal circle in the slit between the valve body and the valve cover .

研究了不同并用比的氟橡胶（FKM）和丙烯酸酯橡胶（ACM）并用胶的硫变特性、物理机械性能、耐老化性、热稳定性和压缩永久变形性能。

The cure characteristics , mechanical properties , resistance to heat and aging and compression set properties of ACM , FKM and their blends of varying compositions were studied .

模得丽935P在氟橡胶中的应用

Application of MOLD FREE 935P to Fluorine Rubber

2002年建成的SUNIST球形托卡马克装置是中国第1台低环径比（R／a≈1.3）的托卡马克装置，具有氟橡胶交叉密封和电绝缘的结构。

The Sino United Spherical Tokamak ( SUNIST ), built in 2002 , is the first Tokamak device with a low aspect ratio ( R / a ≈ 1 . 3 ) . It has a structure of viton cross sealing and electrical insulation .

就四丙氟橡胶TP－2／DCP－TAIC体系做了耐280℃×480h水蒸汽实验，结果表明，其硫化胶的性能保持率较高，体积变化在60%～30%。

With experiment on tetrapropyl fluoro elastomer TP-2 / DCP-TAIC Syatem resistance to 280 ℃× 480h Steam , the result has Shown that the vulcanizate Property has higher preservation and the Volume Change is in 60 % ~ 80 % .

低压变氟橡胶硫化体系试验的研究

Study on Cure System of Fluorine Rubber with Low Compression Set

氟橡胶高效硫化体系的试验及应用

Experiments and Applications of High Efficiency Vulcanizing System for Fluoro Rubber

我国氟橡胶面临着良好的发展机遇。

China 's rubber fluoride facing a good opportunity for development .

用差示扫描量热法研究四丙氟橡胶的硫化特性

Study on the curing characteristics of tetrafluoroethylene-propylene elastomer by differential scanning calorimetry

填料对氟橡胶热空气老化性能的影响

Influence of fillers on hot air aging properties of fluoroelastomer

氟橡胶/甲基乙烯基硅橡胶共混弹性体的性能

Properties of fluororubber / methyl vinyl silicone rubber blends elastomer

叙述了浮动式氟橡胶油封多腔模的结构。

The structure of floating multicavity mold for fluorine rubber was stated .

低压缩永久变形氟橡胶与铝合金粘合的研究

Study on Bonding Fluoro Rubber Having Low Compression Set With Aluminium Alloy

氟橡胶生产、应用现状与发展趋势

The Production , Application Situation and Development Trend of Fluoroelastomer

炭黑对丙烯酸酯橡胶/氟橡胶共混物性能的影响

Effects of Carbon Black on the Properties of ACM / FKM Blends

氟橡胶/镁/硝酸钠富燃料体系的热分析

Thermal Analysis of Viton A / Mg / NaNO_3 Fuel Rich System

氟橡胶/硅橡胶共混胶的制备、结构与性能研究

The Preparation , Structure and Properties of Fluororubber / Silicone Rubber Blends