气流粉碎

  • 网络Air Flow Attrition;jet mill;jet milling
气流粉碎气流粉碎
  1. 碳化硼粉气流粉碎机理

    Mechanism of air flow attrition of boron carbide powder

  2. 气流粉碎方法制备超细WC粉末

    Jet Mill Application on the Manufacturing of Ultra-fine WC Powder

  3. 流化床对撞式气流粉碎制备SiC超微粉

    Preparation of SiC Superfine Powder by Fluidized Bed Opposed Jet Mill

  4. 在高速气流粉碎作用下PVC的力化学降解及形态变化的研究

    Mechanochemical degradation and morphology development of PVC during jet milling

  5. PVC树脂低温超细气流粉碎研究

    Cryogenic ultrafine grinding of PVC resin by jet mill

  6. 气流粉碎B4C粉末的活化烧结研究

    Studies on Activated Sintering of Jet Milled B_4C Powders

  7. B4C粉末的气流粉碎及烧结

    Jet milling and sintering of B_4C powders

  8. 符合GMP要求的气流粉碎自动控制及实验研究

    Autocontrol System and Experimental Study by Air Jet Pulverization According to GMP Requirements

  9. 用气流粉碎分级法对超细WC粉末研磨气流粉碎技术在氢氧化铝生产中的应用

    The application of jet mill in powder metallurgy industry Application of Airflow Grinding Technology in Production of Aluminum Hydroxide

  10. 采用流化床对撞式气流粉碎(QLM80K)对工业用SiC粉体进行超微化处理,考察了工作压力对超微化的影响;

    The superfine-treatment of the industrial SiC powder was carried out by fluidized bed opposed jet mill ( QLM-80K ), and the effects of working pressure on superfine-treatment were studied .

  11. 以同种WC粉末为原料,分别采用高能球磨和气流粉碎的方法细化,通过实验对比两种工艺制备出粉末的物理性能及粒度分布、微观结构。

    This paper compares the physical properties , distribution of particle size and microstructure of two kinds of finished products by means of ball-mill and jet-mill respectively using the same raw WC powder .

  12. 叙述了进行的UO2粉末筛上料气流粉碎试验,并进行了制备芯块研究。

    This paper describes experiments of UO_2 powder superior to screen comminution by airflow , and processes research of pellets preparation .

  13. 本文叙述了用PTFE废弃边角屑料经辐射裂解,超微气流粉碎制备PTFE超细粉的工艺过程与应用范围。

    This paper describes the preparation of ultrafine PTFE powder from the waste leftover bits and pieces of PTFE by radiation splitting and superfine airflow , as well as the application of the powder .

  14. 提高分级精度,增加产量,缩小产品的粒度分布范围是CP系列超声速超微气流粉碎分级机一直以来面临的问题。

    For a long time , CP series of supersonic superfine air flow milling and grading machinery have faced up to such problems as improve high grading precision , increase output and reduce range of particle distribute .

  15. 从气流粉碎系统气流对硅灰石晶体的作用力方向及X衍射结果表征等较深入探索了制备超细针状硅灰石的机理。

    The power direction function on the wollastonite crystal by the fluidized jet mill system , and the characteristics expressiveness of X ray diffraction results are analyzed , at the same time , the preparation mechanism of the superfine grinding high aspect ratio of wollastonite was also studied .

  16. 方法本文主要研究利用水热合成法、气流粉碎法和分级筛分复合技术,利用红外光谱、X射线衍射、粒径分析等进行表征。

    Methods The paper mainly studies a kind of composite technique about heat of water systemization method , current of air smash method and classified filtration technique , making use of the red and outside spectrum , X-radial diffraction , particle diameter analysis etc , to process token .

  17. 采用气流粉碎B4C粉末(中位粒径3.85μm)进行热压烧结实验,研究了热压烧结B4C陶瓷的物理性能。

    The hot-pressing sintering experiments of boron carbide powders ( 3.85 μ m ) obtained by jet milling were carried out . In addition , the physical properties of hot-pressing sintered B_4C ceramic were studied .

  18. 气流粉碎法制备超细粉体的效应分析

    Analysis on Effects of Gas Flow Crushing Process of Superfine Powders

  19. 滑石超细改性气流粉碎研究

    Study on Ultrafine Grinding and Modification of Talc by Jet Mill

  20. 关于无机填料的颜超微气流粉碎

    On the ultra-fine air stream pulverization of inorganic pigments and extenders

  21. 气流粉碎分级技术在亚微米粉体材料制备中的应用

    Application of Airflow Crushing and Grading to the Preparation of Sub-micron Powders

  22. 蒸汽浴电气加热用具过热蒸汽气流粉碎分级机的数值模拟

    Electric sauna heating appliance Numerical Simulation of a Superheated Steam Comminution Classifier

  23. 药品气流粉碎中的工艺参数研究

    Study of the process parameters in pharmaceutical air jet pulverization

  24. 超细气流粉碎基础理论的研究现状及发展

    Actualities and Developments of the Elemental Theory of the Super-Fine Jet Mills

  25. 气流粉碎技术在氢氧化铝生产中的应用

    Application of Airflow Grinding Technology in Production of Aluminum Hydroxide

  26. 气流粉碎分子筛性质和催化性能的研究

    Study on the Properties and Catalytic Performance of Zeolites Pulverized by Air Stream

  27. 气流粉碎对Y型分子筛结构与性能的影响

    Influence of Air Stream Pulverization on the Structure and Properties of Y Zeolites

  28. 超细气流粉碎分级系统产品粒径的确定与控制

    Determination and Control of Product Size for a Ultrafine Milling-Classifying Closed Loop System

  29. 气流粉碎装置粉碎效能分析

    Analysis on crushing efficacy of gas flow crushing equipment

  30. 用于煤超微气流粉碎喷嘴设计关键参数的研究

    Research on key design parameters of nozzle of ultrafine flow-grinding using on coal