橡塑
- 网络Rubber and Plastic;NBR;EPDM
-
橡塑异型材挤出口模CAD的前处理
Pretreatment Technology of CAD in Rubber and Plastics Profile Extrusion Mold
-
PLC在橡塑混炼设备控制系统中的应用
Application of PLC in Rubber Mixing Machine Control System
-
基于DSP的模块化橡塑机械控制器
Moulding Rubber and Plastic Machines Controller Based DSP
-
NET组件技术的变化,最后给出了开发.新型橡塑预制件拼装式集雨水窖研发的可行性探讨
NET component . Discussion of Feasibility of Developing Modular Water Cellar Assemble and Installed with Rubber-plastic Prefabricated Component
-
皮带有橡胶、橡塑、PVC、PU等多种材质。
Belts are rubber , rubber , PVC , PU and other materials .
-
本文研究了以PVC树脂为基质,通过橡塑共混改性PVC的方法制备热塑性弹性体。
In this paper , PVC-TPE was studied by means of modifying PVC and rubber-plastic blending .
-
AF型旋转油封是近年来在国外相继出现的新型橡塑型复合油封。
Type AF rotary oil seal is a new rubber-plastic compound oil seal in recent years abroad .
-
偶氮二甲酰胺(发泡剂ADC)是橡塑制品中使用最广泛的有机发泡剂。
Azodicarbonamide ( ADC blowing agent ) is a kind of widely used organic foaming agent in rubber and plastic products .
-
输送带的材质有:橡胶、橡塑、PVC、PU等多种材质,机架材质有:碳钢、不锈钢、铝型材。
Conveyor belt material are : rubber , plastics , PVC , PU and other materials , frame materials are : carbon steel , stainless steel , aluminum .
-
研究了短纤维(SF)增强再生胶(Rr)、废胶粉(Rs)与高密度聚乙烯(HDPE)的橡塑共混体的制备及其性能。
The study relates to preparing plastic / rubber blend in reclaim rubber , waste rubber powder and HDPE , that is strengthened in short fiber .
-
橡塑电力电缆0.1Hz超低频耐压和tanδ的测试技术
0.1 Hz ultra-low frequency voltage-withstand testing and tan δ measuring techniques for rubber plastic cable
-
用铁精矿生产异性粘结永磁橡塑磁粉的研究两种高能球磨机制备Fe-Si合金磁粉的对比
Comparative study on preparation of Fe-6.5 % Si alloy magnetic powder by two different high energy ball mills
-
探讨了橡塑比和mPE的牌号对共混物力学性能的影响;
The influences of blending ratio and the type of mPE on the properties of PP / elastomer blends were studied .
-
因含有部分有机成分使OSP表面具有一定亲油性,故OSP粉体可直接作为橡塑工业的补强填充剂。
OSP can be used as a rubber reinforcing filler because there are some organic components in it .
-
结果表明,随着共混物橡塑比的增大,EPDM/PP中PP相结晶度下降、周期性应力作用下的滞后现象也减小。
It has been found that the crystallinity of PP in EPDM / PP blends decreases with the in - crease of the blending ratio of EPDM / PP , and the hysteresis reduces under , periodic stress .
-
本文叙述了注射级EPDM/PP材料的研制过程,采用动态硫化方法,找出了适宜的橡塑比例及其它助剂的种类、用量、工艺参数。
The research process of injection grade EPDM / PP material was reported . Using dynamic vulcanization method , the suitable rubber plastic ratio and type , quantity , process parameters of other assistants were discovered .
-
在三螺杆动态混炼挤出机上,研究了不同橡塑比的(三元乙丙橡胶)EPDM/(聚丙烯)PP共混物经动态混炼和稳态混炼挤出后的拉伸性能。
In this paper , EPDM / PP blends with different rubber plastic ratio are extruded separately in dynamic and steady condition from the tri-screw dynamic mixing extruder , and the tensile strength of samples are investigated in the experiment .
-
特别是近年来,随着全钢子午线轮胎、丁基胶内胎、切割V带、橡胶油封等新产品的开发和广泛使用,再加上橡塑共混制品的不断开发,对密炼机的性能要求更加提高。
Especially in recent years , the development and utilization of many new products such as radical wire tire , acrylonitrile butyl rubber tube , raw edge V-belt and rubber oil seal as well as the development of rubber and plastic mixtures deserve perfect function of the internal mixer .
-
CR-E型橡塑共混防水卷材
Mixed CR-E Rubber Water - proof Roll Sheet
-
水泥砂浆水窖整个过程pH值偏高、浊度值一直保持较低;橡塑水窖在贮存中pH值降低、COD值升高;固化土水窖除浊度值前期偏高外,其他指标整体较好。
The turbidity of cement mortar plastering cellar kept low , while the pH values was high during the storage process ; pH value of rubber-plastic cellar decreased but the COD value increased ; the other indicators of solidified soil cellar were better except the high turbidity in initial stage .
-
综述了废橡胶制取的粒径在0.3mm以下的细胶粉在橡胶材料、建材、橡塑共混材料等领域的应用研究进展。
The application of fine rubber powder with particle diameter less than 0.3 mm made from waste rubber to rubber materials , building materials and blending with plastics were reviewed .
-
结果表明:选用低结晶度且熔融指数小的PP与SBR共混,采用半有效硫化体系,橡塑比为70/30~60/40,共混时间为9min时,共混物综合力学性能较好。
The results showed that the better physical properties of blend were obtained by using PP with low crystallinity and melt index , semi efficient curing system , 70 / 30 ~ 60 / 40 SBR / PP blending ratio and mixing cycle for 9 min.
-
试验表明:采用0.1Hz超低频交流电压和调频型谐振试验系统对橡塑绝缘电力电缆进行绝缘测试,可以准确、快捷地发现绝缘缺陷,具有很高的实用价值。
The testing showed that adopting the 0.1 Hz VLF method and using frequency-tuned resonance could find the problem of insulation quickly and accurately . Thus our experience is of very high and practical value .
-
BR/LLDPE橡塑共混体系发泡的研究
A Study of the Foaming of BR / LLDPE Rubber-Plastics Blends
-
橡塑低压输水管的研制热塑性聚氨酯的合成塑料管材的分级问题
Manufacture of Thermoplastic Elastomers / Plastics Low Pressure Water Transportation Pipes
-
橡塑助剂防水涂料加工销售,建筑材料销售。
Xiangsu waterproofing paint fertilizer sales processing , building materials sales .
-
橡塑活性叶蜡石填料的性质及应用
Properties and Application of Activated Pyrophyllite Filler for Rubber and Plastics
-
橡塑磁在微电机中的应用特点与检测规范
The Applied Characteristics and Checkout Specifications of Rubber Magnet for Micro-motor
-
聚氨酯材料在橡塑组合密封中的应用
The Application of Polyurethane in Rubber - Plastic Composite Type Seal
-
橡塑合金橡胶阻燃护套料的研制
Development of Flame Retardant Sheathing Compound Based on Polymer Alloy Rubber