有机玻璃

采用连续损伤力学模型对YB3有机玻璃在常温下的疲劳寿命进行预测。

Fatigue life of the YB-3 polymethyl methacrylate at room temperature is predicted by the continuum damage mechanics model .

高透光率韧性有机玻璃的制备与研究

Study of Preparation of Toughened Polymethyl Methacrylate with High Transmittance

她的出租车里乘客座位和驾驶员之间装着厚厚的有机玻璃隔板。

Her taxicab has a thick perspex partition between the passengers ' seats and the driver .

主材以铝型材与进口有机玻璃、PC、防水布、钢化玻璃

Main wood to aluminum and plexiglass , PC , tarpaulins , toughened glass .

UV光聚合／溶胶－凝胶法制备有机玻璃耐磨涂层

The Preparation of PMMA Wear Resistant Coating by UV-Light Polymerization and Sol-gel Process

挡块及有机玻璃托盘对Sc影响可忽略。

The effect of the block and tray can be ignored .

为了验证该准则，本文采用有机玻璃板材加工多种V形切口试件进行了拉伸实验；

To verify the validity , tensile experiments were carried out on several kinds of V-notched PMMA specimens .

含Eu（OC3H7）xβy配合物的发光有机玻璃的性能研究

Properties of photoluminescent organic glass containing complex Eu ( OC_3H_7 ) _x β _y

本文测得了多孔Al2O3材料和有机玻璃中的二维轴对称冲击波的衰减过程。

As an application , the processes of 2-D symmetric shock attenuation in porous AL_2O_3and PMMA are measured .

ns脉冲下有机玻璃电树枝的引发特性

Initial Characteristics of Electrical Tree in PMMA Under Nanosecond Pulses

在有机玻璃上射频溅射ITO组合薄膜

Deposit ITO coatings on PMMA substrate by RF magnetic sputter

层状有机玻璃PMMA的冲击极化效应与应用

Shock Induced Polarization of Laminate PMMA and Its Application

有机玻璃化学复合镀（Ni-P）-PTFE工艺

Technology of ( Ni-P ) - PTFE Electroless Composite Plating for PMMA

对振幅谱进行了扩散校正，并利用该方法测量了有机玻璃和饱水岩石样品的Q值。

Diffraction for the spectra is corrected and the Q values of organic glass and water-saturated rock samples are measured .

国产航空有机玻璃（PMMA）的非线性应力松弛行为研究

On nonlinear stress relaxation behaviour of polymer PMMA

在用有机玻璃制成的背斜和断层二维模型上，采用等炮检距的特殊观测方法，进行了P波和P&SV转换波的同时观测。

A simultaneous detection of P wave and P-SV converted wave is made using constant offset on a 2-D organic glass model consisting of anticline , fault and horizontal reflector .

H化工公司是以甲基丙烯酸甲酯为龙头，集生产、营销、科研、深加工、产品开发为一体的有机玻璃生产企业。

The H Chemical Company is an organic glass manufacturer that sets production , marketing , scientific , deep processing , product development as a system .

国产航空有机玻璃（PMMA）的压缩应力-应变行为研究Ⅰ.试验方法和试验结果

A STUDY OF UNIAXIAL-COMPRESSIVE STRESS-STRAIN BEHAVIOUR OF POLYMER PMMA ⅰ . Experimental Method and Measurement Results

非金属：模切板、有机玻璃、PC板、PVC板、橡胶板、纺织材料、纸材、塑料。

Non-metal : die cutting board , organic glass , PC board , PVC plate , plate , textile materials , paper , plastic .

MMA室温本体聚合法制有机玻璃的配方研究

Study of the Formulation of Organic Glass from Bulk Polymerization of MMA at Room-Temperature

我们采用的材料有：ABS、POM、有机玻璃、PP料、PC料、电木、铜、铝等。

We work with ABS , POM , organic glass , PP , PC , bakelite , copper and aluminum .

通过试验研究了溶液和乳液聚合法制备聚丙烯酸丁酯（PBA）对浇铸型有机玻璃（PMMA）的增韧改性。

The plasticizing and modifying of PBA to PMMA by solution and emulsion polymerization was studied .

使用直流辉光和微波电子回旋共振两种等离子体辅助反应蒸发法在有机玻璃基底上制备了透明导电ITO膜。

ITO films have been deposited on the polyalkylmethacrylate substrates by DC arc plasma and ECR plasma aided reactive vaporization .

采用所设计的微型CT系统对有机玻璃标准样品进行了三维重建，结果表明该微型CT系统具有较高的精度，重建相对偏差在0.6%以内。

The micro-CT system is used to reconstruct a Lucite sample first and the result shows that the system has a high precision , the relative error of reconstruction is under 0.6 % .

实验测定了国产航空有机玻璃PMMA在室温（20℃）、3&20.45%应变量范围内的应力松驰曲线。

The stress relaxation curves of PMMA in the strains range of 3-20 . 45 % and at room temperature are measured .

应用动态力学热分析技术研究了纳米介孔材料MCM-41对有机玻璃PMMA动态力学行为的影响。

The effects of nanostructured mesoporous material MCM41 on the dynamic mechanical behavior of PMMA were studied by DMTA technique .

方法：比较17例IMRT静态物理补偿器调强治疗计划与有机玻璃模体绝对剂量。

Methods The absolute dose between static physical compensator IMRT plan and polymethyl phantoms was compared in17 cases .

利用低能等离子体对有机玻璃表面进行改性以提高ITO膜的附着力。

The surface reconstruct via bombardment of low energy plasma in order to enhance the adhesion between ITO coatings and substrate of PMMA is finished .

试验表明，在催化剂被加热到400~600℃左右后，该点火器可以成功启动N2O/有机玻璃（PMMA）混合火箭发动机。

A hybrid rocket motor using this igniter was tested . The experiment results demonstrated that this new igniter can successfully start the N2O / PMMA hybrid motor .

该涂层是甲基烯酸甲酯－SiO2的复合物，对基底附着力强，能显著改善有机玻璃表面的抗擦伤能力及表面硬度。

The coating is a PMMA-SiO2 hybrid which firmly adheres to substrate . It is found that the wear resistance and surface hardness of coated PMMA are modified substantially .