控制站

控制站的人员已经开始倒数秒数了。

The people at control have already begun to count down .

该无人机系统由无人机、地面控制站、保障系统组成。

The system is composed by the large UAV , a ground-control station and a support system .

基于GIS的无人机地面控制站的实现

UAV Ground Control Station Based on GIS

在DCS系统中，现场控制站是整个DCS的核心部分。

Field control station is the main parts of DCS .

现场控制站之间组建了Controllerlink现场网络，并在现场网络上实现了数据共享。

Controller Link network is set up between controlling stations in the field , and the data is shared on it .

新型DCS现场控制站的控制策略与容错技术研究

Research on Control Strategy and Fault-tolerant Technique of New DCS Field Control Station

DCS系统中控制站及其组态方法的研究

Research of Control Station and Configuration in DCS System

这个工作台作为控制站，提供跨工具的影响分析和数据沿袭，为InformationServer提供丰富的报告和管理功能。

Acting as a control station , the workbench provides cross-tool impact analysis and data lineage , as well as extensive reporting and administration functions for Information Server .

在DCS系统中，控制站组态是控制方案实施的一个重要组成部分。

Field control station configuration is the important part of realizing control method in DCS system .

DCS训练仿真器中控制站的OO设计与实现

OO design and implementation of the control station of the DCS training simulator

现场控制站的性能设计直接决定了整个DCS系统的可靠性和稳定性。

The design of field control station directly determines the reliability and stability of the entire DCS system .

监控系统、PLC控制器、通信网络和各现场控制站组成了污水处理的主要控制系统。

Monitoring and control system , PLC controller , communication network , and each site control station form the main control system of wastewater treatment .

采用基于PLC的控制站能有效提高DCS的设计和现场调试效率，降低运行维护成本。

The practical experience of PLC-based control stations can improve the design and field commission efficiency greatly and reduce the operation cost effectively .

文中研究了利用PLC自由口通讯协议实现两个S7-200控制站之间以及PLC与上位机之间的通讯。

This paper investigated the application of user-defined protocol with freeport mode to realize the communication among S7-200 Control Sets and computer .

整个系统的硬件由PLC控制站、PLC分布式I/O站、工控操作站/工程师站、冗余网络总线组成。

The hardware of whole system consists of PLC control station , distributed I / O station , operation station / engineer station , and redundant network bus .

叙述DCS系统中的网络通信协和系统的监控软件体系，阐述了系统中操作站和过程控制站的软件结构。

Describes the communication protocol and monitor architecture in the DCS system , illustrations monitor architecture in operation station and process control station .

针对工业危险废弃物处置场的生产特点，设计了一套以网络结构和PLC控制站为主的计算机控制系统，并详细介绍了该系统的结构、特点、功能及实施方法。

A set of computer control system predominated by network structure and PLC control station is designed with reference to the production features of industrial hazardous waste disposal site .

在对DCS现状分析的基础上，设计出了一套由组态软件和智能现场控制站组成的DCS系统。

Based on the analysis of present DCS , a kind of DCS consisting of the configuration software and intelligent field control station are designed .

通过该网络设计，该系统实现了对操作站IPC、控制站PLC，尤其是第三方控制系统单机的柔性无缝集成，极大地提高了可实时性和可扩展性。

Furthermore , for the flexible seamless integration of IPC , PLC , and especially single equipment system , the real-time capability and expandability were improved greatly .

系统包括两个控制站（CS），一个工程师站（ES）和两个操作员站（OS），它们之间通过基于TCP/IP协议的以太网相连。

The system includes two control stations , one engineer station and two operate stations , which are joined via Ethernet based on TCP / IP protocol .

GPS监测系统是一套实时监测系统，它包括：GPS测量仪、接驳站、信息收集总控制站、光纤网络、GPS计算机系统及显示器等。

GPS is a real time monitoring system , including GPS surveying instrument , receiving station , central control station for information collection , optical fiber network as well as GPS computer system and monitors , etc.

中央控制站（PC微机）以主从式工作方式实现对128个现场测控单元的监控管理，并通过通信控制器RS232／485转换模块完成网络通信。

128 field measure-control units are monitored and managed by central control station with master-slave mode , and the network communication is performed by RS-232 to RS-485 communication controller .

并讨论了具有N个控制站的一般分散非线性控制系统，给出了此种系统通过坐标变换和反馈变换可精确线性化的充分必要条件。

At the same time , this paper discussed the general decentralized nonlinear systems with N control station , and gives the sufficient and necessary conditions such that the systems can exactly linearize through axis transfer and feedback transfer .

该系统采用PLC作为控制站，因此能适应恶劣的工业环境，组态软件采用数据引擎技术解决了PLC编程的不方便以及在线修改等难题。

The system could stand adverse industrial environment as it used PLC as a control station . Using the data engine technology in the configuration software solved the problems of PLC program and on line modification .

应用该方法的计算机一方面与Internet联网，另一方面通过西门子通讯卡与控制站组成MPI/DP网络，从而确保系统网络的可靠安全性。

The computer for remote diagnosis and maintenance is both connected to the Internet and to the control station through the Seimens ' communicating card thus forming an MPI / DP network and the reliability and security of the system network are ensured .

CENTUM－CS控制站组态主要包括控制站FCS构成，I/O模件登录，软件开关定义，区域定义等。

Field control station configuration is consisted of PCS configuration , I / O module , software switch , area common and so on .

针对V型滤池净水处理工艺，设计了以冗余PLC为现场控制站、工控机为监控管理机的全厂计算机监控系统。

Aim at the V-filter water treatment process , a monitoring control system is designed for the whole treatment plant , which consists of a supervision management computer and redundancy PLCs that acts as the local control station .

中间层为分布式冗余现场控制站（DPU），它处于主干网和现场总线网之间；

In the middle is the dispersed redundancy spot controlling station distributed process unit ( DPU ) .

RVT能做为选择直接连接到地面控制站。

The RVT can alternatively be connected directly to the Ground Control Station .

N-90系统数字控制站的仿真模块设计

Design of simulation algorithm for digital control station ( dcs ) of N-90 system