工艺设计

主要论述了锰黄铜熔炼工艺设计及熔炼过程。

This paper briefly expounds the technological design and smelting process of ZCuZn40Mn3Fel .

多丝大直径PC钢绞线的生产工艺设计探索

Technological Design Exploration of the Multi-wire and Larger Diameter PC Steel Strand

高浓度CO变换反应器工艺设计探讨

Discussion on Process Design of Shifter with High CO Concentration

提出了确定混凝工艺设计G和T值的优化方法。

This text has proposed the optimization method to coagulation G and T design ;

基于均匀设计与BP神经网络的管材无模轴压胀形工艺设计

Process Design of Dieless Tube Axial Force Bulging Based on Uniform Design and BP Neural Network

V型滤池过滤水力学与工艺设计计算

The hydrodynamics , technological design and computation as related to the V shape filter bed

计算机辅助工艺设计系统（CAPP）

Computer Aided Process Planning System ( CAPP )

文章介绍了一种采用0.18μMCMOS工艺设计，多级级联、差分结构宽带限幅放大器的设计方法。

A0.18 μ m CMOS , multistage cascaded , differential broadband limiting amplifier was proposed .

年产1万t发泡剂ADC装置工艺设计

Process Design for 10,000 t / a ADC Plant

采用0.6μMCMOS工艺设计了一种低压低功耗的运算放大器。

A low-voltage and low-power CMOS op-amp was designed using a 0.6 μ m CMOS process .

定量化和智能化工艺设计是CAPP发展的主要趋势。

The trends of the development of CAPP are toward the quantitative and intelligent process planning .

基于GT的液压机产品快速工艺设计系统开发

Development of rapid process design system of hydraulic press based on group technology

膨胀床-催化蒸馏合成MTBE工艺设计

Process design for MTBE produced by expansion bed - catalytic distillation

用VB开发一款实用软件，集产品设计与工艺设计于一体，提高工作效率。

With the soft developed with VB , we can integrate the design and technics technology , which can improve our efficiency .

工艺设计工作的实际需求是协同工作，知识积累，快速复用，这要求现代CAPP系统是一个完整的分布式网络应用系统。

Process planning needs cooperation , the accumulation of knowledge and rapid reuse , which requests that contemporary CAPP system is a integrated distributed application system .

利用pHEMT工艺设计了一个Ka波段微波单片低噪声放大器电路。

A Ka band monolithic-microwave integrated-circuit ( MMIC ) low noise amplifier with PHEMT process is presented .

硅片是由0.35μm、3-金属和双压CMOS工艺设计和制作的，其空间分辨率为1280×1024象素。

The silicon panel was designed and fabricated by a 0.35 μ m , 3_metal and dual_voltage CMOS process with a spatial resolution of 1280 × 1024 pixels .

OOC工艺设计计算研究与分析

Research and analysis of design and calculation for OOC process

采用0.25μMCMOS工艺设计了一种增益动态范围为30dB的可变增益放大器。

A 30 dB gain CMOS VGA is designed using a 0.25 μ m CMOS process .

通过对上海锅炉厂有限公司的工艺设计业务流程分析，分析CAPP系统需求，确定了锅炉CAPP系统的模块组成。

According to analysis of process designing operation flow for Shanghai boiler works Ltd , the systematic requirement of CAPP was analyzed and the module composing of CAPP was established .

铁屑内电解处理DDNP工业废水工艺设计的研究

Research on Technological Process Design of DDNP Industrial Wastewater Treatment by Iron Chip Internal Electrolysis

热力系统换热设备CAD系统（简称HECAD系统）实现了新型高效纵流壳程换热设备研究开发与工艺设计、机械设计、零部件设计的一体化和集成化。

Heat-exchanger CAD system ( HECAD ) realizes the integration of Technological design , Mechanical design and Components design for heat-exchange equipment with longitudinal flow of shell-side fluid .

120mm×120mm连铸坯一火成材改造工艺设计及实践

Technical Design and Its Practice of " Roll in One Heat " Reformation of 120mm × 120mm Continuous Casting Billet

采用OMMIC的0.2μmPHEMT工艺设计了工作在21~28GHz的平衡式放大器。

Balanced amplifier at 21 ~ 28 GHz was designed using the OMMIC ′ s 0.2 μ m PHEMT technology .

将知识工程引入到CAPP系统中，分析了知识在人机协同工艺设计中的特点和作用，利用面向对象与产生式规则相结合的知识表示方式进行工艺知识建模；

Secondly , knowledge engineering is introduced in the CAPP system and the characteristic and function of process knowledge is analyzed . Model the process knowledge of CAPP system utilizing the combination of the knowledge representation method of object-oriented and procedure rule .

针对大庆原油建立了描述原油TBP蒸馏曲线、相对分子质量曲线和密度曲线的数学模型，为工艺设计提供了可靠的基础数据计算方法。

The mathematical model for crude TIP curve , relative molecular weight curve and density curve corresponding to Daqing crude was established , supplying reliable basic data and calculation method for process design .

凝析气PVT分析数据是进行气藏数值模拟及开采工艺设计的重要参数，但由于各种原因在气藏开发初期未能取得代表性PVT样品或未进行取样，以至使开发方案设计不能正常进行；

PVT data of gas condensate reservoir provide important parameters for reservoir numerical modeling and recovery planing . For various reasons , however , representative PVT samples of the initial development phase are often not available .

利用CAE技术，可以模拟成形过程，预测成形过程中可能出现的质量问题，检验模具设计的合理性，并优化模具的设计和成形工艺设计。

Using the technology of CAE , We can simulate the process of stamping , forecast the questions of quality , evaluate the reasonable of designs for dies ' face , optimize the design of dies ' surface and process parameters at the design stage .

在对基于CAE数值模拟结果的两种设计方案说明的基础上将神经网络设计方法引入到铸造数值模拟结果的分析处理过程，构建壳体铸件低压铸造工艺设计优化模型；

After the description of two kinds of design projects based on CAE simulation results , ANN-Optimization design was used to optimize CAE simulation results of casting process . And then the technological design optimization model of shell casting by low pressure die casting process was constructed .

利用该修正IPR方程，推导了含水油井综合IPR曲线的计算公式，可用于不同井斜角油井含水后的产能预测和举升工艺设计。

IPR equation used in water cut oil wells are derived further using the same technique , and this equation can be used in the forecast of productivity of a well when water appears in the production wells as well as in the design of artificial lift technology .