工业纯钛

工业纯钛焊缝腐蚀性能研究

Investigation on the Localized Corrosion of Commercially Pure Titanium Weldment

工业纯钛高温动态拉伸力学行为的微观机制

Microscopic mechanisms underlying the dynamic tensile behaviors of a commercially pure titanium at elevated temperatures

工业纯钛TA2离子氮化的研试

A Study on the Ion-nitriding of Titanium TA_2

介绍了用Al－Ti－Al合金金属复合板钎焊工业纯钛的研究结果。

The results of a study of commercial pure ( C P ) titanium brazing with Al - Ti - Al clad metal sheet are presented .

工业纯钛室温ECAP变形的组织和性能

Microstructure and Properties of Commercial Pure Titanium Processed by ECAP at Room Temperature

变形方式对工业纯钛室温ECAP组织及性能影响

Influence of ECAP Routes on the Microstructure and Properties of CP-Ti at Room Temperature

利用5kW的CO2快速横流激光器对工业纯钛进行了激光气体氮化。

The nitrided layers were fabricated using a 5 kW continuous wave CO_2 laser on commercial pure titanium surface .

本课题采用真空热压扩散焊接（VacuumHotPressingDiffusionWelding），简称VHP来实现工业纯钛和工业纯铜的扩散连接。

In this thesis , using the vacuum hot pressing diffusion welding ( Vacuum Hot Pressing Diffusion Welding ), which is called VHP for short , can achieve the bonding of industrially pure titanium and pure copper .

通过Gleeble-1500热模拟机研究了在特高温度下工业纯钛的氧化行为。

The extreme high temperature oxidation behavior of commercial pure titanium was researched by Gleeble-1500 thermal simulator .

利用电化学方法研究了F对工业纯钛（TAl）在NaBr水溶液中阳极极化行为的影响。

The electrochemical techniques were used to investigate the effect of fluoride anion on the anodic polarization behavior of pure titanium in neutral NaBr aqueous solution .

逐层TEM亚结构对比分析结果表明：工业纯钛疲劳强度的提高和强化层组织中孪晶的形成有关；

By means of TEM methods to analyze the various layer substructures , the following results were obtained : ( 1 ) The improvement of fatigue strength of commercial purity titanium is related to the formation of twins in strengthened layer ;

采用电弧离子镀设备，以高纯Fe靶和Pd靶为原料，在TA1工业纯钛表面先后沉积Fe，Pd2层单金属薄膜。

An iron ( Fe ) film and a palladium ( Pd ) film were deposited on a pure titanium substrate by using high pure Fe and Pd as target material in a multi-arc ion-plating apparatus .

采用三维晶体学取向分布函数（CODF）分析法研究了工业纯钛板材不同冷轧形变量对织构形成的影响。

The effect of rolling reduction on the formation of texture in cold rolled and annealed titanium sheet has been in investigated by means of the crystallite orientation distribution function analysis ( CODF ) .

结果表明：随着转速的增加和温度的升高，工业纯钛和00Cr25Ni22Mo2不锈钢的冲刷腐蚀速度增大，高温（83℃、92℃）转速高于4.18m/s时腐蚀增加更明显；

The experimental results showed that the erosion-corrosion rate of Ti and the stainless steel increased with increasing rotating speed and increasing temperature , and it approached the maximum at high rotating speed ( > 4.18m/s ) and at high temperature ( 83 ℃, 92 ℃) .

表面强化对工业纯钛显微组织的影响

Effect of surface plastic deformation on microstructure of commercial purity titanium

工业纯钛在特高温度下的氧化行为研究

Research on Extreme High Temperature Oxidation Behavior of Commercial Pure Titanium

间隙杂质对工业纯钛性能的影响

Influence of Interstitial Impurity on Property of Commercial Pure Titanium

工业纯钛光纤激光-MIG复合焊接工艺及性能

Fiber laser-MIG hybrid welding process of commercial pure titanium and its properties

工业纯钛微弧氧化膜的结构及拉曼光谱分析

The Microstructure and Raman Spectra Analysis of MAO Film on Pure Titanium

工业纯钛低周疲劳应力&应变响应

Stress-strain responses of low-cycle fatigue in commercial purity titanium

轧制工艺对工业纯钛组织性能的影响

Effects of Rolling Process on Microstructures and Properties of the Commercial Pure Titanium

工业纯钛电镀槽焊接工艺设计

Welding process design for Pure Titanium Electroplating trough

工业纯钛喷丸强化研究

Investigation on the Shot Peening of Commercial Pure-Titanium

工业纯钛机械孪晶演化及其对纯钛低温力学性能的影响

Twinning behavior and its effect on mechanical behavior of commercial titanium at cryogenic temperature

剧烈塑性变形条件下工业纯钛晶粒细化机理研究

Study on Grain Refinement Mechanism for Commercial Pure Titanium Processed by Severe Plastic Deformation

工业纯钛的离子渗氮

Ion Nitriding of Industrial Pure Titanium Industry

工业纯钛的缝隙腐蚀探讨

Crevice corrosion discussion of commercial pure titanium

利用激光熔覆技术，在工业纯钛表面原位合成了TiC/Ti复合材料。

TiC / Ti metal matrix composite was prepared by in-situ fabrication through laser surface melting .

工业纯钛经喷丸、滚压强化后，疲劳强度得到不同程度的提高。

The fatigue strength of commercial purity titanium was improved through shot peening or cold rolling treatment .

本工作应用表面分析技术研究了工业纯钛在溴化钠溶液中的孔蚀引发过程。

The pit initiation process on commercially pure titanium in bromide solution was investigated by means of surface analysis .