导磁体

中心导磁体对S-枪特性影响的计算与实验研究

The Calculation and Experimental Study of the Effects of Central Magnetic Conductor on the Characteristics of S-Gun

研究了使用温度范围在3～10℃（±3℃）的感温磁控开关，开关中的感温导磁体和恒磁源分别用Cu-Ni-Si-Mn合金和快淬Nd-Fe-B粘结磁体制成。

The switch controlled by magnetism and temperature was studied . The applying temperature of the switch is 3 ~ 10 ℃(± 3 ℃) . The magnetic conductor induced temperature and permanent field were made of Cu-Ni-Si-Mn alloy and bounded Nd-Fe-B , respectively .

磁悬浮轴承（MB）是一种新型的机电式轴承，是利用电磁场对导磁体的作用力而实现对转子的无接触支承。

Magnetic Bearing ( MB ) is a kind of new typical mechatronics product which utilizes the electromagnetic attractive force exerting on a magnetic conductor to suspend a rotor without any contact .

伺服阀衔铁与上导磁体干涉问题分析

Analysis of Interference between Servo Valve Keeper and Upper Guide Magnet

块状导磁体在深度卡尺感应加热中的应用

Application of Blocky Magnet in Induction Heating for Depth Callipers

强力感应器与导磁体的发展

Development of Power Inductor and Magnetic Flux Field Concentrators

悬浮电位导电体或悬浮磁位导磁体存在下三维静电磁场的计算

Calculation of Three-Dimensional Static Fields with the Existance of Isolated Conductors and Magnets

导磁体引出一点与电抗器作电气连接。

A point is led out by the magnetic conductor to make the electric connection with the reactor .

基于对脉冲电磁控制阀的动态电磁特性的试验研究，通过改进导磁体使用的磁性材料，减小了电磁阀的磁响应时间，大大提高了电磁控制阀的快速响应性能。

In order to improve the injection system performance , the dynamic electromagnetic characteristics of a pulsed solenoid valve are analyzed by experiments .

这种新型的永磁&内封闭导磁体组合发电机既有永磁发电机的体积小、重量轻、无电刷等优点，又有内封闭导磁体发电机电压可调的优点。

It combines the advantage of permanent-magnet generator ( small size , light weight , brushless ) and inductor generator ( voltage regulaton ) .

通过对电子管高频振荡线路的分析和对导磁体感应器的试验，制作了合适的高频导磁体感应器。

Suitable high frequency magnetic conductive inductor was made through analyzing the high frequency vibrating circuit of electron tube and doing an experiment of magnetic conductive inductor .

在感应加热中，导磁体的应用能显著提高感应器的加热效率、提高产品质量、节能等。

In respect of induction heating , a magnetizer will considerably heighten both heating efficiency of inductor and heat treatment quality of part so as to save energy .

计算了四种导磁体结构S-枪的磁场分布，并就场分布对S-枪工作特性的影响进行了实验研究。

The field of four structures has been calculated , and an experimental study of the effects of field distribution on the characteristics of S-gun has been done .

结果表明，带锥角镶嵌导磁体的圈式感应器，其有效圈高度、锥角和内径的合理匹配可以满足淬硬层形态的要求，采用立式淬火机床连续淬火可以大批量生产合格的半轴。

The result shows that the quenching inductor with wimble magnet inlaid is adaptable for this technique , and the vertical quenching machine can be used in mass production .

根据麦克斯韦电磁理论建立磁场的数学模型，使用了列主消元法对磁路模型的磁场进行了分析和仿真，得到了在不同电流及位置下磁通在导磁体、衔铁中的分布状况；

Build mathematics model of magnetic field according to Maxwell 's electromagnetism theory , give a theory analysis to magnetic model through column-pivoting elimination , get the relation between the size of armature and the position ;

本文简单介绍了导磁体工作的基本原理，并给出在汽车零件大规模生产中所积累的导磁体应用的一些经验，以阐明如何更有效地使用导磁体。

This paper introduced the work principle of magnetic conductive body and certain experiences accumlated in course of massive production of auto parts to explain haw to use more effectively the magnetic conductive body , what has been stated here is only for reference .

本文定义了切向结构永磁同步电机聚磁的概念，并利用有限元分析软件讨论了极对数与气隙磁密、每极磁通、空载电势、转子导磁体磁密等物理量之间的关系。

The finite element analysis ( FEA ) software is used to analyze physical relations among pole numbers to air gap flux density , per pole flux , non-load electric potential , flux density of rotor lead magnet material , flux density of stator tooth , etc.

三维导电导磁体电磁响应的数值解载流直螺线管磁场的三维数值解

The numerical solution for the EM response of three-dimentional conducting permeable bodies the three-dimensional numerical solution of magnetic field of a current-carrying solenoid

常导型MR磁体温度控制部分原理及故障处理

Theory and trouble shooting of temperature control unit in resistive magnet

对于聚变反应堆中超导载流磁体在稳态电流基础上受到脉冲电流影响时的动力稳定性给出了定量分析方法。

A quantitative analysis for dynamic stability of a set of superconducting partial torus in a fusion reactor under a pulse current over a stationary current is given .