圆锥齿轮

利用CATIA的混合建模功能在实体和曲面工作台上建立直齿圆锥齿轮模型，并通过知识工程工作台完成齿轮的参数化建模。

Building the parametric model of straight-tooth bevel gear wheel with CATIA is discussed .

Windows环境下圆锥齿轮传动CAD系统的设计

The Design of a CAD System for Bevel Gearing Transmission in Windows Environment

基于AutoCAD的航空圆锥齿轮传动CAD系统研究

Research on Aviation Conical Gear Transmission CAD System Based on AutoCAD

本文主要研究在通用数控铣床上加工直齿圆锥齿轮模具电极的NC刀轨自动生成算法。

This thesis studies the algorithms of the tool path generation for NC milling .

本课题开发了直齿圆柱齿轮传动、斜齿圆柱齿轮传动和直齿圆锥齿轮传动CAD系统。

The transmission CAD system also includes diagonal tooth cylinder gear and straight tooth taper gear transmission CAD system .

基于ANSYS的滚齿直齿圆锥齿轮弯曲应力有限元分析

Finite element analysis on the bending stress for roller spur bevel gear based on ANSYS

基于OpenGL的圆锥齿轮曲面离散

Dispersing the Surface of Conical Gear Based on OpenGL Technology

基于Pro/E与ADAMS圆锥齿轮的建模及仿真

Modeling and Simulation of the Bevel Gear Based on Pro / E and ADAMS

利用UG实现直齿圆锥齿轮的三维造型

Realization of the 3D model of straight-teeth bevel gear by using UG software

设计直齿圆锥齿轮的SolidWorks二次开发

The design of straight bevel gear and developing of SolidWorks

本文研究的是基于UG的汽车差速器圆锥齿轮的参数化设计。

This thesis is base on UG automotive differential in parametric design of bevel gear .

目的是在UG建模的环境下，利用表达式功能实现汽车差速器圆锥齿轮模型的参数化设计。

Purpose is in UG modeling environment , use expression function realization car differential bevel gears model parametric design .

根据直齿圆锥齿轮渐开线齿廓的形成原理，利用VBA编程，在AutoCAD环境下自动生成渐开线齿廓。

According to formation principle of involute profile of cone gear , the involute profile was automatically created under the AutoCAD environment by VBA program .

提出实体参数化逆向造型设计的方法，介绍应用该方法开发圆锥齿轮三维实体参数化造型设计系统的过程.基于SolidWorks的圆柱直齿轮参数化设计

Process of parametric modeling of bevel gear with standard evolute tooth on PC based CAD system is presented . Development of Parameterized Design for Straight Bevel Gear Based on SolidWorks

本文采用PRO/E参数化特征建模方法和ANSYS有限元分析系统，对斜齿圆锥齿轮的齿廓进行弯曲强度和接触强度分析，进一步探讨斜齿圆锥齿轮在承载方面的优势。

This article adopts PRO / E parameterized model building and chooses ANSYS finite-element analysis system to analyze bending strength and contact strength of skew bevel gear tooth profile , so as to further explore skew bevel gear load-bearing advantage .

在软件Catia中建立了滚齿直齿圆锥齿轮的精确模型，利用Catia与ANSYS之间的数据交换接口，将该模型导入ANSYS。

The precise model for the roller spur bevel gear is built up in the software Catia . Taking ( advantage ) of the data interface between the Catia and ANSYS , we put the model into the ANSYS .

提出一种基于STEP标准的汽车后桥主传动器中圆锥齿轮类零件的几何模型描述，并制定出它的应用协议（ZCAP）。

This paper presents a geometric model description methods of the cone gear for final driver of automobile driving axle system based on STEP , and establishes application protocol ( ZCAP ) .

通过对已生成曲面的TrimMerge等操作生成单个轮齿实体，最后使用Patten等方式获得完整的渐开线直齿圆锥齿轮，实现了对直齿圆锥齿轮的造型设计。

The single tooth is generated by " Trim " " Merge ", and the complete teeth is obtained through such as " Patten " method , finally the 3D model of involute straight-teeth bevel gear is realized .

直齿圆锥齿轮摆辗成形有限元模拟研究

Finite Element Analysis of Rotary Forging in Straight Tooth Bevel Gear

斜齿圆锥齿轮与直齿圆锥齿轮应力分析研究

Analysis of Skewed Tooth Bevel Gear and Straight Tooth Bevel Gear

基于Pro/Engineer的直齿圆锥齿轮三维实体造型

Entity Modeling of the Conic Gear Based on Pro / Engineer

直齿圆锥齿轮齿面和齿根过渡曲面方程

The tooth flank equation and fillet equation of straight bevel gear

冷精锻修形圆锥齿轮的齿形设计

Teeth Surface Design for Flashed Cold Die Forging Bevel Gears

重载圆锥齿轮的自然齿形

The Natural Teeth Profile of the Heavy Load Taper Gear

直齿圆锥齿轮冷闭塞锻造数值模拟分析

Numerical Simulation Analysis of Cold Closed-Die Extrusion Forging for Straight Bevel Gear

等基圆锥齿轮数控铣削走刀轨迹的研究

Study on cutting tool path of equal base cone gear NC manufacturing

直齿圆锥齿轮啮合过程数值模拟

Numerical value simulation on matching course of spur bevel gears

建筑机械圆锥齿轮传动的模糊可靠性优化设计

Fuzzy Reliability and Optimum Design for Cone Gear Drive of Architecture Machine

非对称直齿圆锥齿轮的建模及其接触应力的有限元分析

Straight Bevel Gear 's Precise Model and Contact Stress Finite Element Analysis

高速圆锥齿轮断裂故障分析

Crack Failure Analysis of a High & Speed Bevel Gear