圆柱

在圆柱靶管中装入环状永磁铁（1）、导磁垫片（2）以及冷却管组成。

The utility model is composed of an annular permanent magnet ( 1 ), a magnetic conductive gasket ( 2 ), and a cooling tube , which are arranged in a circular column target pipe .

RC圆柱正截面承载力实用计算方法

A Practical Method to Calculate the Capacity of RC Circular Column

圆柱在建筑中通常用来增添气势和显示地位。

Columns are usually intended in architecture to add grandeur and status

它被记录在一个蜡质圆柱上。

It was recorded on a wax cylinder .

基于PC的开放式圆柱凸轮数控加工系统

Developing of NC Machining System for Cylindrical Cam Based PC

渐开圆柱面SPLIT钻数学模型

The mathematical model of SPLIT drill with involute cylindrical surface SUNFLOWER OPENING

运用中文Excel函数进行变位圆柱齿轮几何尺寸的计算

Calculation on Geometry Size of Cylindrical Gear Using Chinese Excel Function

用H（01）型圆柱谐振腔测量介质材料介电常数的原理及方法

Principle and Method To Measure The Permittivity of Dielectric Material by Using H_ ( 01 ) Type Cylinder Resonator

轴心受压FRP约束钢筋混凝土圆柱的承载力计算方法

Axial Compressive Capacity of FRP Confined Circular Columns

依据二维流体弹塑性模型及二维断裂处理方法，研究X射线热击波在圆柱壳体内的传播规律。

In this paper , the propagation of X-ray thermal shock wave in cylindrical shell is studied according to the two-dimensional fluid-elastic-plastic model and two-dimensional fracture method .

LDV技术用于测量振动圆柱尾迹

Measurements in TI-IE wake of an oscillating cylinder with LDV technique

通过爆炸焊接过程的闪光X射线摄影，测得了飞板弯折角。其数值与半圆柱试验测得的飞板弯折角基本上相一致。

The bend angle of the flyer plate was determined by flash X-ray photography during explosive welding and the value coincides with that obtained in the semicylinder test .

8mm波段圆柱螺旋腔的研制

Study of Cylinder Helical Cavity for 8 mm Waves

小Kc数振荡流中圆柱绕流流场结构的数值分析

Numerical analysis of flow structure around a circular cylinder in oscillatory flow at low KC numbers

空心圆柱仪（HCA）模拟恒定围压下主应力轴循环旋转应力路径能力分析

Analysis on ability of HCA to imitate cyclic principal stress rotation under constant confining pressure

对适合圆柱坐标描述的问题，通过公式变化将其转换为能用PDE工具箱求解的形式。

Problems suitable for description with cylindrical coordinates are transformed into forms that are capable of solution with the PDE toolbox through formula variation .

通过solidworks软件能够建立精确的圆柱凸轮的三维模型，为有限元分析和动态仿真奠定了基础：（4）能够将设计结果转换为数控加工代码，为数控加工做好准备。

The system can set accurately up the three-dimension model by Solid Works , on which the finite analyses and the dynamic emulation are based ; ( 4 ) the system turns the result of design into NC code , which is prepared for the NC manufacturing .

而当H在实用范围内，特别是对于表面发射率较低的短圆柱空腔和半顶角较大的圆锥空腔而言，两种方法得到的ε~c值是不同的。

In other words , the differences in the values of ε for two methods are evident in the H range of practical application , especially in the following cases : smaller values of surface emittance ; shallow cylindrical cavities and conical cavities with larger half-angles .

132m跨双层圆柱面网壳的非线性稳定分析

Buckling Analysis of 132 meter Span Double-Layer Reticulated Cylinder Shell

并据此基本解得到了圆柱壳受集中法向载荷、集中温度载荷作用下的奇异解，这些积分形式的解的被积函数具有第二种Hankel函数和指数函数乘积的形式，容易获得数值结果。

Numerical results for the singular solutions with integrands expressed in terms of the product of the second Hankel function and the exponential function agree well with FEM results .

用Fluent计算流体力学软件对固体火箭发动机喷管流场进行了数值计算，研究了喷管收敛半角、喷管喉部上游圆弧曲率半径和喉部圆柱段长度对喷管流场的影响。

Nozzle flow field of SRM was numerically simulated with Fluent software . The effects of nozzle convergent half angle , radius of curvature on upstream of throat section and length of throat cylinder on flow field are investigated .

首先介绍了编织复合材料圆柱壳在几种主要因素影响下的动力稳定性问题，用Hamilton原理建立非线性动力稳定性问题的一般性基本方程。

First , the dynamic stability of braid composite cylindrical shells with the influences of some main factors is introduced . The general governing equations for the nonlinear dynamic stability is obtained . by the Hamilton Principle .

结合GS系列高速渐开线圆柱齿轮传动和我所当前的实际情况，以SolidWorks2001为平台进行二次开发，开发出GS系列高速渐开线圆柱齿轮传动CAD软件。

Combining GS series high speed involute cylindrical gear transmission system and our practical application , taking SolidWorks 2001 as programing platform for secondary development , the GS series high speed involute cylindrical gear transmission CAD software system has been set up .

基于Mindlin板理论、压电理论、粘弹性理论和理想流体方程，对充液圆柱壳主动约束阻尼结构在流固耦合条件下的建模进行了研究。

Based on the theories of Mindlin plate , piezoelectricity and viscoelastic materials and fluid dynamics , the finite element modeling of a fluid-filled cylindrical with piezoelectric damping is presented in this paper .

在Visualc++6.0编程环境下，开发了扭曲叶片、圆柱叶片、双流道叶轮、蜗壳和径向导叶等的参数化三维造型软件PCAD-3D。

Under the environment of Visual C + + 6.0 , the parametric 3-D modeling software PCAD-3D is developed , which includes column blade , curved blade , double channel impeller , volute and radial vaned diffuser , etc.

采用电磁工作者广为关注的FD-TD方法，对飞机的基本构成部件（方柱、圆柱、平板）的电磁散射问题，进行了研究。

In this paper the widely concerned FD-TD method is employed in analyzing Electromagnetic scattering problems of aerocraft basic parts ( square cylinder ? circle cylinder ? flat board ) . Rectangular mesh ?

本文分析圆柱TE011模端盖对称隙缝特性。

The characteristics of symmetric slots on the t op-cover of TE 011 - mode cylindrical cavity are analyzed in this paper .

借助落锤装置实现冲击加载，完成了一组充满水的金属薄壁圆柱壳试件轴向冲击屈曲过程的实验研究，同时利用LsDyna大型动力软件对冲击屈曲的全过程进行了计算机模拟。

An experimental investigation on the axial impact buckling of thin metallic cylindrical shells fully filled with water is presented . Low velocity impact tests are carried out by DHR 9401 drop hammer rig . The whole process of dynamic buckling is simulated using LS DYNA computer code .

用三维圆柱坐标同位网格方法求解环形空间中的自然对流，用周期性三对角阵（CTDMA）方法求解所形成的代数方程。

Natural convection in annular enclosure is simulated numerically using collocated 3D cylindrical coordinate . The cyclic tridiagonal matrix ( CTDMA ) method is adopted to solve the discretization equations .

滚动轴承中圆柱滚子的线接触长度为有限值，在充分供油情况下，它有其独特的润滑现象&油膜压力分布规律和油膜厚度分布规律，这些是经典线接触EHD所不能揭示的。

The length of the cylinder roller in the roller bearing is finite on the condition of fully-supplying-oil , it has its special phenomena of lubrication-rules of film pressure distribution and rules of film height distribution , etc. Such are not revealed by the classical line-contact EHD .