固化剂

ɡù huà jì
  • curing agent
固化剂固化剂
  1. 合成的含能固化剂与GAP有良好的物理相容性。

    The energetic curing agent C has good physical compatiblity with GAP .

  2. GD-8固化剂及其在环氧滤砂器中的应用

    GD-8 Curing agent and It 's Application on Epoxy Resin Sand Filter

  3. 该胶以端异氰酸酯基聚氨酯预聚体为A组分,以端羟基聚氨酯预聚体和其它固化剂为B组分。

    Hydroxyl-Terminated polyurethane prepolymer is the mainly component of A , B is made of Isocyanate-Terminated polyurethane prepolymer and other curing agents .

  4. 与酸酐类固化剂组合的浇铸树脂,用于绝缘体,开关等,有高的机械强度和F级的绝缘性能。

    Casting resin used with anhydride hardeners for making insulators and switchgear components of high mechanical strength , for class'F'Insulation .

  5. 小叶品种为材料,用由MS基本培养基配制的25%海藻酸钠包裹腋芽节段(固化剂为25%CaC12),制作人工种子。

    Were encapsulated with 2 & 5 % sodium alginate ( Plus a basal MS medium ) for preparating artificial seeds .

  6. PSS系列土壤固化剂在公路路面基层中的应用

    Application of Pss Soil Firming Agent in the Base of Road Pavement

  7. GT型土壤固化剂改良土的工程特性研究

    Study on engineering properties of improved soil by GT soil firming agent

  8. 低苯醇酸树脂与低游离TDI固化剂的研制

    The Preparation of Low-Benzene Alkyd Resin and Low-Isolated-TDI Curing Agent

  9. 气相色谱-质谱联用检测固化剂中游离TDI的研究

    Quantitative determination of free TDI content in crosslinker by GC-MS

  10. 用NCS固化剂处理高液限粘土填土路基

    Treatment the embankment filling base of high water-level clay with NCS Curing Agent

  11. 固化剂含量对RTM用环氧树脂体系固化性能的影响

    Effect of curing agent content on RTM epoxy system curing properties

  12. 新型浅色低游离TDI聚氨酯固化剂的合成

    Preparation Research of New Pale Color PU Curing Agent with Low Free TDI

  13. 试验结果表明:ISS固化剂能有效提高土体力学性能,已建成道路使用较好。

    The results indicate that ISS can improve mechanical properties of soil .

  14. 当增韧剂Q含量在15~20份(质量)时,固化剂在21~24份(质量)时,胶黏剂的剪切强度和剥离强度最佳。

    Shear strength and peel strength reached optimum value when the dosage toughening agent Q is 15-20 parts and curing agent is 21-24 parts .

  15. 由对苯二甲酸(PTA)废料酯化合成的聚酯树脂再与重芳烃、锌粉、铁红、石墨及固化剂等制得防腐抗静电油罐涂料。

    An anticorrosive and antistatic coating for storage tank was prepared with PTA wastes and heavy arenes .

  16. 经迈克尔加成反应,用丙烯腈制作了一系列改性多元胺固化剂,将其与双酚A型环氧树脂配合,用于粘接ABS塑料。

    The results showed that the incorporation of acrylonitrile-modified cure agents can improved the adhesive strength between epoxy resin and ABS plastic .

  17. 确定了实验的固化剂为B/EMI-2,4复合固化体系,由DSC结果用外推法确定了固化工艺。

    B / EMI-2,4 curing system was identified as the curing agent , and the optimized curing condition was also decided .

  18. NCS固化剂改善膨胀土填筑路基施工技术

    Improvement of the construction technology for base courses filling with expansive soils mixing NCS hardening agents

  19. HS干硬性土壤固化剂的研究

    Study on HS Dry Soil Stabilizer

  20. 本文通过一系列的试验方法,研制出以海藻酸钠为成膜物质、硅藻土作填充材料、选用Ca型固化剂等组成的新型面膜&可剥性粉状面膜。

    A new type of face pack-powdered and peel off face pack composed of diatomaceous earth and sodium alginate was prepared based on a series of tests .

  21. 采用催化聚合法合成了低游离TDI聚氨酯固化剂。

    A low free TDI polyurethane crosslinker , through catalyst polymerization technology , has been prepared .

  22. 聚氨酯漆固化剂、聚氨酯胶粘剂:游离甲苯二异氰酸脂(TDI)。

    PU paint firming agent , PU Jiaozhanji : floating toluene two different cyanic acid resin ( TDI ) .

  23. 在本论文的第三章中首先通过DSC测试,确定了环氧树脂与固化剂的配比及固化过程升温曲线。

    In the third chapter , the weight ratio of epoxy resin and curing agent and curing process of heating curves were determined first by DSC .

  24. 所制备的高固含量水性聚氨酯表现出优越的粘接性能,未加固化剂的单组分水性聚氨酯剥离强度(PVC/PVC)高达8.8N/mm。

    Without external cure agents , the unique one-component waterborne polyurethane displays excellent adhesive properties , T-peel strength test ( PVC / PVC ) yielded a maximum value of 8.8N/mm .

  25. 以三聚氰胺、甲醛和苯酚为原料经两步反应,制得了一种环氧树脂的含氮固化剂(三聚氰胺改性酚醛,MPF)。

    A flame-retardant nitrogen-containing curing agent was synthesized by melamine , formaldehyde and phenol through two reactions .

  26. 本实验和理论研究结果首次证明了环氧交联网Tg松弛过程具有单一松弛时间描述的线性标准固体的特征,与预聚体分子量、固化剂配比和固化条件无关。

    Our results first proved that the Tg relaxation of epoxy network is characteristic of standard linear solid with a single relaxation time which is independent of the molecular weight , stoichiometry and cure condition .

  27. 本文研究了固化剂用量、烘烤时间、固化时间以及胶层厚度对CR/MMA接板氯丁胶粘剂剥离强度的影响。

    The peeling strength of CR / MMA graft adhesive is dependent upon the concentration of curing agent , heating time , curing time and adhe-sive thickness .

  28. 利用IR、SEM等手段,较详细地研究了铜粉–环氧树脂体系中固化剂与铜粉的相互作用,并探讨了铜粉用量、形状对涂料导电性能的影响规律。

    In the preparation of conductive paints of epoxy resin filled with copper powders the reaction between the curing agent and copper was studied in detail by means of SEM and IR .

  29. 通过直接剪切、无侧限抗压强度灵敏度、标准固结试验、孔隙分析X射线衍射及扫描电镜等现代测试手段,研究了改性淤泥的强度特性,探讨固化剂的改性淤泥的机理。

    Based on the direct shear , sensitivity of unconfined compressive strength , standard consolidation test , X-ray diffraction ( XRD ) and SEM , the mechanism and strength characteristics of treated sludge are analyzed .

  30. 以我省无砂石地区双城市为例,介绍了NCS土壤固化剂的使用及其效果。

    Taking the case of Shuangcheng the gravel-poor region in our province , it introduces the application and the related effects of NCS .