反应工程

  • 网络Reaction engineering;Chemical Reaction Engineering
反应工程反应工程
  1. 热塑性弹性体SBS的工程开发&Ⅰ.反应工程开发

    Engineering development of SBS thermoplastic elastomers & ⅰ . reaction engineering development

  2. 本文介绍用VB语言开发《化学反应工程》多媒体课件的性能特点,讨论实现中的一些主要技术及课件的使用情况。

    The functions of the multimedia CAI for Chemical Reaction Engineering that is developed by VB are introduced in the paper .

  3. 己内酰胺聚合反应工程CAD软件包&Ⅰ.工业化生产实际值与软件包计算结果的比较

    CAD software for CPL polymerization engineering & ⅰ . comparison between calculation results and practical results

  4. 在此基础上,提出了PA6聚合反应工程研究中尚有待开展的几点建议。

    And then , a few problems for the further research in PA6 polymerization process are pointed out .

  5. 应用电子束辐照法净化含SO2和NOx的烟气,是原子核化学反应工程在环境工程中的具体应用。

    The method of application of electronic beam irradiation to purify smoke with SO_2 and NO_X , is the practical application of atomic nucleus chemical reaction engineering in the environmental engineering .

  6. 从聚合反应工程角度分析了顺丁橡胶(BR)生产中的聚合过程特点及其偏离理想动力学的情况。

    The process characteristics of polymerization reactor for butadiene rubber ( BR ) production were analyzed in view point of engineering research .

  7. 为了研究超临界CO2作为非水相介质在生化反应工程中的作用,有必要考察超临界CO2处理对微生物活性的影响。

    In order to study the role of supercritical CO2 as a nonaqueous medium in the engineering of biochemical reactions , it is necessary to probe the effects of supercritical CO2 treatment on microbial activity .

  8. Adomian分解法在反应工程非线性数模求解中的应用

    Application of Adomian Decomposition Method to the Solution of Nonlinear Mathematical Models in Reaction Engineering

  9. 介绍了己内酰胺聚合反应工程CAD软件包的建立,用工厂单VK管聚合和两步法聚合生产工艺验证了该软件包的可靠性。

    A new CAD software for caprolactam polymerization was reported . Its reliability was verified by the results from plants with single VK tube polymerization or two step polymerization .

  10. 应用化学反应工程的原理,分析了Fe3O4氧化过程颗粒的热状态,表明存在着火现象,并经实验证实。

    Thermal state of ultrafine Fe_3O_4 particle in the oxidization process was analysed via chemical engineering principle . The result showed that there exists ignition phenomenon and was verified by experiments .

  11. 论文利用双膜理论和化学反应工程分析的方法,探讨了高浓度CO2生产超细碳酸钙的碳化反应各阶段的动力学区域、碳化反应机理和结晶原理;

    The article uses " the Double-film Theory " and " Chemical Reaction Engineering Analysis " way to study the dynamic areas , crystal principle and its ' carbonized mechanics of all terms high concentration CO_2 to produce super-fine calcium carbonate .

  12. 在对影响TA精制过程的几个反应工程问题进行计算和讨论的基础上,探讨了PTA(精对苯二甲酸)装置长周期、高负荷稳定运行的工艺条件。

    The process condition for long - term high - loading steady operation of PTA unit was studied on the basis of calculation and discussion of several reaction engineering problems affecting the TA refining process .

  13. 强调要实现sPP的工业化,尚需从聚合反应工程的角度,加强催化剂负载和聚合工艺的研究。

    Confronting with problems such as low bulk density of sPP and reactor fouling , it has been emphasized that the studies of reaction engineering focused on developing an optimal process for catalyst support and special polymerization process are very important .

  14. 《化学反应工程》多媒体课件的开发及应用

    The Development and Application of Multimedia CAI for Chemical Reaction Engineering

  15. 关于超临界流体技术在反应工程上应用的回顾和进展

    Review and Development of Super Critical Flow Application on Reaction Engineering

  16. 产品工程学&化学反应工程的新拓展

    Production engineering : a new developing space for chemical reaction engineering

  17. 光化学反应工程是化学反应工程的一个分支。

    Photochemical reaction engineering is a branch of chemical reaction engineering .

  18. 研究方向是分离与催化反应工程。

    His research areas include separation and catalytic reaction engineering .

  19. 化学反应工程对石油化工技术发展的影响

    The impact of chemical reaction engineering on the development of Petrochemical Technology

  20. 反应工程在研究箱式混合澄清槽中的应用

    Application of Reaction Engineering to the Study of Box Mixer-Settlers

  21. 对苯二甲酸精制过程中几个反应工程问题探讨

    Study on Several Reaction Engineering Problems in TA Refining Process

  22. 氯乙烯悬浮聚合反应工程中的若干问题

    On the of Reaction Engineering in the Suspension Polymerization of Vinyl Chloride

  23. 化学反应工程题库的设计

    Design of the Test Bank for the Chemical Reaction Engineering

  24. 反应工程中的过程耦合研究现状及前景

    A survey and prospects of processes coupling in reaction engineering

  25. 化学反应工程教学新理念和实践探索

    New Concepts and Practical Exploration in the Teaching of Chemical Reaction Engineering

  26. 顺丁橡胶聚合反应工程分析与生产装置技术改造探讨

    Engineering analysis for polymerization and approach to improving process equipments in BR production

  27. 连串、平衡反应工程收率最优化

    Optimization of the total yield of consecutive equilibrium reactions

  28. 化学反应工程教学改革探讨

    Some experience of teaching practice for chemical reaction engineering

  29. 自由基聚合在聚合反应工程中占有举足轻重的地位,在自由基聚合反应过程中,尤其是本体聚合,常常出现凝胶效应和玻璃化效应。

    Free radical polymerization plays a key role in modern polymerization reaction engineering .

  30. 柴油深度脱硫中的反应工程问题及对策

    Chemical reaction engineering problems in deep hydrodesulfurization of diesel fuel and corresponding solution