分析手段

  • 网络Analytical methods;anom
分析手段分析手段
  1. 利用XRD、SEM等分析手段对样品进行表征。

    The samples were characterized by XRD and SEM .

  2. 利用SEM分析手段研究了铝镁浇注料的抗渣性能。

    The slag corrosion resistance of the Al_2O_3-MgO castable is investigated by SEM analysis method .

  3. 通过改变碱处理的时间,可以得到不同接枝率的复合膜。通过红外光谱(FTIR)、光电子能谱(XPS)、扫描电镜(SEM)等分析手段证实了膜表面接枝共聚物的存在。

    Grafted copolymers on the surface of composite membrane were verified by FTIR , XPS and SEM .

  4. 采用IR、UV、DSC、TEM等分析手段对复合粒子PANi/nano-Ni进行了分析表征。

    The Nano-Ni / PANi composite nanoparticles were characterized by means of IR , UV , DSC and TEM .

  5. 以FT-IR、DSC、TGA等分析手段研究了聚合物的结构和耐热性能。

    The polymer structure and the heat resistance were investigated by FT - IR .

  6. 用SEM波谱分析手段,定性研究了合金元素铌在新锆合金中的存在方式。

    The existing form of niobium in zirconium-based alloy containing Fe , Sn , Cr alloying elements was researched qualitatively by means of SEM .

  7. 本文采用背散射电子衍射(EBSD)及透射电镜(TEM)技术对拉伸变形单晶铝([110]方向平行于拉伸轴)的显微组织进行了表征,直接对比了两种分析手段所得结果的异同。

    Tensile deformation microstructure of aluminum single crystal was characterized by TEM and EBSD techniques .

  8. 通过X射线衍射、辉光放电光谱、扫描电镜等分析手段,对锌镍合金镀层的成分变化规律、微观形貌和结构以及腐蚀产物进行研究。

    The coating components , microcosmic appearance , structure and corrosion products of zinc-nickel alloy had been analyzed by means of XRD , Glow Discharge Optical Emission Spectrometry and SEM .

  9. 利用扫描电镜、电子探针、X射线衍射和辉光质谱等现代理化测试分析手段,率先完成了对花岗石材高光泽饰面层理化结构的综合测试分析研究工作。

    Comprehensive analysis including the physical and chemical characteristics and microstructure of high glossiness granite surfaces are analyzed by employed the SEM , electron probes , XRD and glow mass spectrogram .

  10. 本文应用常规分析手段对池塘水体中的O2、CO2、pH、阴离子、阳离子及营养元素进行了研究。

    The study on O_2 , Co_2 , pH , negative ions , positive ions and nutrient elements in the water have been carried out with general analysis method in this paper .

  11. 通过采用红外光谱、X衍射及扫描电镜等分析手段分析了络合剂的作用、晶粒、晶相以及薄膜形貌。

    The analysis of FI-IR spectra , XRD patterns and SEM morphologies were used to analyze the effect of chelating agent , crystal grain , crystal phase and pattern of the films .

  12. 基于三期森林资源分布图,以GIS作为分析手段,应用景观生态学数量方法,研究了森林景观及景观类型的变化情况。

    Based on the forest resources distribution map of three periods , taking GIS as a means of analysis , applying landscape ecology means , forest landscape and its type change were studied .

  13. 同时,借助于SEM和XRD等分析手段,对厚膜电阻的导电机理、力敏特性与浆料物化特性之间的关系也进行了一些探讨。

    The corre - lation of conduction mechanism , strain effects and the physical and chemical properties of the paste is also studied with aid of XRD and SEM techniques .

  14. 根据ICF靶材料研究的需要,采用自悬浮定向流法制备了金属间化合物CuAl2纳米复合微粉,并通过TEM和XRD等分析手段对复合微粒材料的显微结构和相组成进行了研究。

    Nanocrystalline intermetallic compound CuAl_2 powder was synthesized by flow-levitation method . The microscope structure and phase composition were studied by means of TEM and XRD .

  15. 利用TG、DTG热分析手段对该系列配合物RE(NCS)3-4(C6H5CH2NH2)的热分解进行了研究。

    By means of TG and DTG thermal analysis , the thermal decomposition of RE ( NCS ) _3 · 4C_6H_5CH_2NH_2 has been studied .

  16. 借助N2吸附-脱附,XRD,NH3-TPD,Py-IR等分析手段对催化剂进行表征,考察了La不同的引入方法对其结构和酸性的影响。

    The effects of different introduction methods for La on the structure and acidity of the resulting catalysts were investigated .

  17. 由实时测定的溶液浓度和透光率得到的参数DC可确定相应工艺条件下的最小晶种添加量,为结晶产品的质量控制和优化提供了分析手段。

    The parameter DC estimated from on-line measurements of solute concentration and transmittance could be applied to minimize the seed load for a given seeded crystallization operation , and to control or optimize crystal quality .

  18. 通过FT-IR、SEM、TGA及DSC等分析手段,探索其杂化机理,研究两种杂化纤维的形貌、结构与性能。

    The mechanism of the hybrid reaction , the structures and properties of the two hybrid fibers were studied by FT-IR , SEM , TGA and DSC .

  19. 为解决控制系统中角度位置信号实时测量、分析手段缺乏的问题,设计基于USB技术的便携式角度位置数据采集仪。天使(英文)

    A portable angle position data acquisition device based USB technique is designed in order to implement real-time measure and solve the lack of analytical method in angel position control system .

  20. 经过氨处理,薄膜的机械强度比未采用氨处理的薄膜大大增强,并利用红外光谱、原子力显微镜(AFM)等分析手段分析了薄膜强度增强的机理。

    After ammonia process treatment , the mechanical property of film was improved obviously and the mechanism was discussed by IR spectrum , AFM analysis methods .

  21. 采用多种分析手段(UV-vis、IC、~1HNMR、HPLC-MS)确定光催化&臭氧氧化降解H酸的中间产物。

    Intermediates of H-acid degradation by combined photocatalysis of UV irradiation and ozonation were analyzed by some analytic technologies ( UV-vis , IC , 1H NMR , HPLC-MS ) .

  22. 本文以动态力学分析手段(DMA)分别研究了SA型树脂、Retan540和铬复鞣革的动态力学性能。

    The ' dynamic mechanical properties of leather retained by SA type resin , Retan 540 and chrome are studied in the present papes by DMA method .

  23. 本文以四极质谱作为过渡应答测量中的分析手段,连续快速跟踪和分析被测物种,测量了H2和CO在改性Rh/Al2O3催化剂上的吸附和脱附性能。

    Quadrupole mass spectrometer was used in the transient response technique as an analytical tool . With this technique the adsorptive characteristics of H_2 and CO on the modified Rh / Al_2O_3 catalysts were studied .

  24. 通过宏观形貌、化学成分、金相组织、力学性能、X射线衍射、扫描电镜观察等分析手段判断出热采注汽管线的最终破裂原因是氢腐蚀造成。

    The analysis of macroforms , chemical compositions , metallographic structure and mechanisms performance as well as x-ray and electronic scanner examination have found that the rupture of the steam injection pipe was caused by hydrogen corrosion .

  25. 同时采用GPC(凝胶渗透色谱)、GC/MS(色谱一质谱)等分析手段对水解(酸化)反应过程中有机物形态变化进行研究。

    The difference of organic form in hydrolysis ( acidification ) was analysed with GPC ( Gel Permeation Chromatography ) and GC / MS ( Gas Chromatography / Mass Spectrometer ) .

  26. 利用荧光探针技术和圆二色谱等分析手段对两种水溶性高分子金属卟啉络合物同DNA的作用进行了初步研究。

    The modes and activities of the interaction of DNA and water soluble polymeric metalloporphyrin complexes , which have been prepared by polymeric analogous reaction and copolymerization , have been discussed according to circular dichroism spectra and fluorescent probe method .

  27. 利用红外光谱、透射电镜、DSC等分析手段,对硅丙乳液的粒子结构进行了表征,并与乳胶漆的主要性能进行了关联、分析。

    By means of IR , GPC , TEM and DSC , molecular structure of silicone acrylate emulsion was characterized , correlated with principal performance of emulsion paint and analysed .

  28. 利用阿基米德排水法、XRD、SEM、ICP-MS等分析手段对CdTe靶材的致密度、相结构、组织形貌、纯度等性能进行表征。

    By using Archimedes method , XRD , SEM , ICP-MS and other analytical tools that characterized CdTe targets density , phase structure , morphology , purity and other properties .

  29. 同时,用现代微观分析手段,探讨了纳米Zn/ZnO颗粒在Al2O3管状基质上烧结时,纳米ZnO颗粒的形核和长大。

    Moreover , modern microanalysis device is used to explain the formation or growth of ZnO nanoparticles , when Zn / ZnO nanoparticles coated on tubal fundus of Al2O3 ceramic were sintered in air .

  30. 在一流化床上制备彬县煤活性焦,利用X射线光电子能谱(XPS)等分析手段考察了活化条件对制得的彬县煤活性焦表面性质的影响。

    The effects of activating conditions on the surface properties of the activated chars prepared from Binxian coal on a batch fluidized bed were investigated using X ray photoelectron spectroscopy ( XPS ) and other analytical methods .