光固化

最后，提出了提高制件精度的措施和方法，这对光固化快速成型技术的发展及应用有一定的指导意义。

At last , the measure and method of enhance the part precision is presented , which could be a guidance to the development and application of SLA .

基于PLC的光固化快速成形数控系统

Numerical control system of stereolithography apparatus based on PLC

B组：全酸蚀干黏接光固化复合树脂修复；

Group B , all-etching , dry-bonding , light-curing composite resins ;

UV光固化胶粘剂的研究及应用

Study on UV-curable adhesives and its application in LCD assembly

改性蓖麻油制备UV光固化涂料的研究

Study on UV Curing Coatings Based on Modified Castor Oil

UV光固化热敏记录层机理的研究

Study on the mechanism of UV curable thermo-sensitive recording layer

UV光固化环氧丙烯酸酯耐磨涂料的研究

Study on UV Curing epoxy acrylate Abrasion Resistant Coatings

由蓖麻油制备的UV光固化涂料

The Preparation of UV Curable Coatings from Castor Oil

腰果酚改性酚醛树脂的UV光固化研究

Cardanol Modified Phenol-Formaldehyde Resin of the UV Curing Research

介绍了紫外（UV）光固化涂料的组成（包括光引发剂、活性单体、齐聚物、助剂）及其作用。

The components and their functions of UV curing coatings were introduced at first .

卤素和LED光固化灯照射复合树脂的机械强度比较

Comparison of the mechanical properties of composite resin cured by halogen curing light with those by LED curing light

本研究采用常压浸渍工艺制备了玻璃纤维增强光固化聚丙烯酸酯类树脂基复合材料（GL/EEPE和G（3D）/EEPE）。

In this paper , glass fiber reinforced visible light curable dimethacrylate resin composites were prepared through impregnation technique .

Sol-Gel法制备光固化纳米复合涂料的应用性能

Performance On Application Of Preparing UV-curable Nano-composite Coating by the Sol-Gel Method

印制电路板用UV光固化材料

UV Curing Materials for Printed Circuit Board

目前，牙翌牙科器械主要产品有：LED光固化机、管治疗仪、科正畸系列仪器。

Now , our dominating products are : LED curing light , Apex locator , series of Dental adjust equipments .

石英光纤光固化涂料的XPS分析

A study of UV cured quartz optical fiber coating with XPS

光固化窝沟封闭剂Concise三年临床效果

The Clinical Results about the Visible Light-Cured Sealant Concise Over 3 Years

介绍了UV光固化胶粘剂的优缺点及应用领域；

Advantages , defects and usage fields of the UV curable adhesives were introduced in the article .

介绍了UV光固化涂料用齐聚物、单体、光引发剂以及助剂的开发。

The development of the oligomers , monomers , photoinitiators and additives used in UV curable coatings is introduced .

叔胺能敏化MI，提高MI的引发效率，从而提高光固化速度。

The photo curing was sensitized by tertiary amines .

介绍粉末涂料用于热敏类材质的新品种及UV光固化、低温固化和改进型的低温固化粉末涂料的应用。

The applications of the UV cure , low-temperature cure and modified low - temperature cure powder coatings were introduced .

纳米改性SiO2填料对光固化涂料耐腐蚀性的影响

Influence of Modification of Nano SiO_2 Filler on Corrosion Resistance of UV-Coatings

综述了此低聚物在UV光固化涂料中提高金属表面附着力和具有阻燃特点的应用。

The application of this oligomer in UV curing coatings for improvement of adhesion on metals and its fire retardancy are reviewed .

本文对发展中的光纤保护性涂料进行了介绍，重点介绍了热固化和紫外（UV）光固化两大类光纤涂料的固化原理、组成特性、涂覆工艺及主要性能。

The protective coating for optical fibers was summarized in this review . The heat-cured and UV light-cured coating were reviewed in detail .

粉末涂料光固化UPR的熔融缩聚合成

Melting Polymerization Synthesis of UV-curable Unsaturated Polyester Resins for Powder Coating

重点讨论了紫外（UV）光固化皮革涂饰剂的发展历程和现状，及其相对于传统皮革涂饰剂的优势。

The development course , present situation of ultraviolet ( UV ) curing leather finishing agent and its advantages superior to traditional leather finishing agent were discussed emphatically .

首先，针对UV光固化的一般过程，分析了表面氧阻聚的机理，并评述了前人在氧阻聚的抑制方面所做的工作。

On the base of the process of uv-curing , we analyse the surface oxygen inhibition mechanism and the work on resisting oxygen inhibition before was also evaluated .

结论：不同载体和浓度的CP漂白剂可以引起光固化复合树脂颜色的改变，但没有显著的临床意义。

Conclusion Bleaching agents of different carrier or concentration can cause color change in 4 light-polymerized composite resins , but no obviously clinical significance .

在制备光固化水性环氧涂料的过程中，讨论了环氧开环和引入GMA的意义。

Reaction with GMA and photoinitiator , UV-Curable waterborne epoxy resin coatings have been prepared .

用FTIR跟踪监测环氧丙烯酸酯胶粘剂光固化过程并研究了光引发剂体系中辐射时间与双键转化率的关系。

The paper used FTIR to monitor the curing progress and studied the effects of photoinitiators on the relationship of exposure time and conversion .