假捻

  • 网络false twist;texturized;DTY
假捻假捻
  1. 阻捻盘假捻作用的分析

    An Analysis of False Twist Action of Navel in OE Spinning

  2. 通过对热板温度、加弹速度、拉伸比、DY比、假捻张力等工艺参数的调整,探讨了影响锦纶6弹力丝生产的主要因素。

    The influence of process conditions such as hot-plate temperature , draw texturing rate , D / Y ratio , false twist tension on producing PA6 yarn are described .

  3. 对SDS型假捻变形机的卷绕机构进行了研究。

    The Take-up system of the SDS false twist-texturized machine was studied .

  4. PROFIBUS现场总线技术在化纤行业假捻机控制上的应用

    PROFIBUS Technique Application to the Control of Twister

  5. SDS导丝胶辊为英国斯克格SDS系列高速纺涤纶长丝假捻机用器材。

    SDS rubber guide roller is one part of the high speed false twisting machine of SDS series imported from England .

  6. 文章介绍了制取聚对苯二甲酸丁二酯(PBT)的POY的切片干燥、纺丝及假捻等工艺条件,及其POY和DTY的质量指标。

    Technological conditions for manufacturing POY of PBT include chip drying , spinning and texturing etc.

  7. 本文根据假捻机台数多规格相同的特点,用PLC与一台小容量UPS,对多台假捻机逐台进行双电源切换,完成整个用电系统切换。

    In this paper , basing on many false twist-machines and they have the same standards , we can achieve the double power conversion using PLC and a small capability UPS .

  8. 使用陶瓷盘与聚氨酯盘搭配组合假捻器生产83dtex/68f涤纶DTY,取得了满意的效果。

    83 dtex / 68f PET DTY was produced by using a ceramic disc and PU disc combined frictional unit .

  9. 从丝温、丝在热箱中的接触时间、D/Y比、盘的材质4个方面分析假捻变形机使用高温热箱对PET丝物理参数的影响。

    The article analyses the influence of high-temperature heat box on the physical parameter of PET silk from the following aspects : the silk temperature ; the contact time of silk in heat box ; the D / Y ratio ;

  10. 本文对在日本村田公司33H型双喂入拉伸假捻变形机上开发生产涤纶复合竹节丝的工艺进行了探讨。

    The technology of PET Composite slub yarn produced on the model 33H double feeding draw-texturing machine from Murata Co.

  11. 探讨和分析了加工速度、D/Y比、假捻器工作盘数、热箱温度、卷绕超喂、交叉角、定型超喂、网络压空等对DTY残余扭矩的影响以及残余扭矩的控制。

    The influence of process speed , D / Y ratio , number of friction disc , heater temperature , take-up overfeed , etc on DTY residual torque are analyzed . The central method is put forward .

  12. 通过对Sirospun纺股线中单纱结构的研究认为Sirospun纱两根单纱上存在着假捻现象。

    In this paper , through the investigation of the single yarn structure of the Sirospun ply yarn , it is believed that there is false twist in the single yarns of the Sirospun ply ones .

  13. 纱条与固定假捻器之间摩擦力的计算

    Calculation of Friction between the Ideal Sliver and the Fixed Twister

  14. 涤纶熔结紧点丝假捻变形工艺探讨

    Discussion on the Technology of PET False-twist Textured Yarn with Tight-spot

  15. 微细旦假捻变形丝加工与应用

    The process and application of false twist texturing fine filament

  16. 假捻卷绕张力与工艺参数的数学关系的研究

    Study on the Mathematical Relationship between DTY Winding Tension and Process Parameter

  17. 粗纱机高效假捻器的分析与应用

    The Analysis and Practice of a High efficient False Twister

  18. 固定假捻器的参数优化及其应用

    Optimization of the Fixed Twister 's Parameter and its Application

  19. 空心锭子纺纱系统中缠捻与假捻的研究

    Studies on Wrap-Twisting and False-Twisting of Hollow Spindle Spinning System

  20. 假捻器套圈定位装配新工艺

    The Assembling Process of Ferrule Orientation on the False Twisters

  21. 低碳钢假捻盘冷挤压工艺及模具设计

    Design of Cold Extrusion Process and Die for Mild Steel False Twister

  22. 研究了假捻法低捻纯棉纱的上机织造性能。

    The weaving properties of low twist yarns were studied .

  23. 在聚酯变形工艺中最佳的假捻器入口温度

    Best Inlet Temperature of False Twister in Polyester Distortion Technique

  24. 摩擦假捻器对变形丝质量的影响

    Influence of friction false twister on textured yarn quality

  25. 赛罗纺后导纱器产生的假捻

    False Twist by Back Roving Guide in Siro Spinning

  26. 固定假捻器作用原理的初步探讨

    Preliminary Analysis of the Principle of the Fixed Twister

  27. PLC+UPS在假捻机双电源切换中的应用

    The application of conversion of PLC and UPS at false twist-machine double power

  28. 在假捻过程中捻度随时间变化的规律一般用假捻方程表示。

    The variation of twist with time is represented by a false-twist equation .

  29. 转杯纺加工兔棉纱混纺比、假捻盘、捻系数的优化研究

    Optimization of technical parameters of rabbit / cotton blending yarn on rotor spinning

  30. 苎麻纯落麻转杯纺假捻盘磨损研究

    An investigation into the wear of navel for PURE RAMIE NOIL rotor spinning