三角测量法

本文提出一种以CCD摄像机为检测工具，以激光三角测量法为原理的激光切割机高度跟随检测系统的设计方案。

A method using CCD camera and the laser triangulation principle to design a height adjusting system for laser cutti .

对激光三角测量法应用于表面形貌的检测进行研究。

Research has been done on the measurement of surface profile using the laser triangulation method .

为了测量在线转子的振动信息，以半导体激光器为光源，以PSD（positionsensitivedetector）为探测器，基于光电三角测量法，建立了一套包括软、硬件在内的激光测振系统。

In order to measure the vibration information of a rotor on line , a laser vibration system including software and hardware is set up , based on diode laser as light source , PSD ( position sensitive detector ) as receiver and photo-electric triangular measuring method .

IRST的被动定位实质上是一个动态三角测量法，对于固定目标，可以利用多次测量和最小二乘法降低定位误差。

The passive orientation of IRST is a dynamic triangle measurement . For the fixed target , the orientation error can be minimized by multiple measurements and the least squares ( LS ) method .

本文研究二元光学元件（BOE）在三维轮廓测量中的应用，以BOE作为结构光发生器，设计并搭建一套基于三角测量法的三维测量系统。

The application of the BOE in the 3-D measurement has been investigated in this paper . A 3-D measurement system is designed and established based on the triangle method , in which BOE working as the producer of the structural light .

一种标定三角测量法激光位移计的方法

A Calibration Method for Laser Displacement System Based on Triangulation

三角测量法是一种传统的位移测量方法。

Laser measurement based on triangulation is a traditional method for measuring displacement .

你能够通过三角测量法确定埋藏中心碑石的地点。

And you should be able to triangulate where the centre stone is buried .

三维曲面激光双三角测量法

Laser Two-Triangle Measuring Method of 3-D Curved Surface

根据光学三角测量法的原理，设计了一套测量机车受电弓滑板磨耗的装置。

A unit for abrasion detection of pantographic slipper of locomotive is designed according to the principle of optical triangulation method .

研究的对象是基于激光三角测量法获得的船体分段面三维数据。

The research aims at a data of the ship body that acquired according to the triangle diagraph method of laser .

随着激光器、光电探测器和计算机的发展，三角测量法有了很多新的进展和应用。

Along with the development of Lasers , photoelectric detectors and computers , triangulation method has made much progress and found more and more applications .

激光三角测量法是一种非常重要的非接触测量方法，在工业生产中，特别是三坐标测量机上，有着广泛的应用。

As an important non-contact measuring technology , the laser triangle method is widely applied in industrial production , especially in Coordinate Measuring Machines ( CMM ) .

三角测量法原理简单、计算方便，在无接触测量距离及面形中有相当重要的实用价值。

Triangle measuring method has quite important practical value in non-contact measurement for distance and three dimension position of surface , and its principle is simple and calculation is convenient .

用三角高程测量法代替三四等水准测量的可行性研究

Feasibility of Measuring by Triangle Elevation Instead of Level Survey

简便的全站仪三角高程测量法

Triangle height survey method using simple total-station meter

新三角高程测量法的探讨

On new trigonometric leveling method

基于此，提出了全站仪三角水准测量法，并论述了该法的测量原理和实际作业方法及在山区地形条件下实际应用的可行性。

Based this , this paper puts forward the method of total station triangle leveling , and discusses the principle of the method and actual working method and the feasibility of actual application under mountain area terrain condition .

然后，针对系统结构特点，采用了三角交汇测量法和立体视觉测量法分别对系统空间位置静态误差和动态误差进行测量。

Also , the system tracking performance is improved . Secondly , for the structural characteristics of the system , the measuring method of triangular intersection and stereo vision are used to measure the static error of the spatial location and the dynamic error , respectively .

对于漫反射物体的轮廓测量的光学投影式轮廓测量技术，根据不同的测量方法和条纹图像分析技术可以大致分为两种：直接三角法和相位测量法。

Of the different shape measurement methods and the phase analysis techniques , optical profilometry for the diffused reflection objects can be classified into two groups , namely direct triangulation and grating projection phase measurement method .

本文在深入研究激光三角测量原理的基础上，提出了一种三维曲面的激光双三角测量法，并给出了设计要点。

On the basis of a thoroughgoing study of the principle of laser triangle measuring method , a laser two-triangle measuring system for 3-D curved surface is described .