zro2

Well-size-distributed ZrO2 microspheres can be realized by applying vibration dispersion technology .

采用振动分散技术可以获得尺寸分布均匀的二氧化锆陶瓷微球。

Conclusion : Decorated nano TiO2 and nano ZrO2 could be permeated into dental composite resin evenly .

结论：经过表面处理的纳米二氧化钛和纳米二氧化锆能够均匀的渗入牙科复合树脂中。

Al2O3 / ZrO2 system refractory casting materials and their products combined by mullite

莫来石结合铝锆质耐火浇注料及制品

In this paper , Al2O3 / ZrO2 composite ceramics were prepared by explosive synthesis .

本论文研究了通过爆炸合成制备al2O3/ZrO2共晶复合陶瓷。

To fabricate high performance ZrO2 / Ni cermets with continuous component distribution is of great significance .

因此，研究如何制备出成分连续变化的ZrO2/Ni系金属陶瓷复合材料有着重要的现实意义。

Processing and microstructure characteristics of hydrothermal crystallized Zro2 nanometer powders under low pressure are discussed .

本文采用水热结晶法研究了在较低压力下纳米氧化锆粉体的制备和性质。

It also deals with the cutting features and experiments of fine ceramic tool material ( Al2O3 , ZrO2 ) .

指出了氧化物系精细陶瓷Al2O3、ZrO2的切削加工特点，列举了加工实例。

The grain size , surface roughness and residual stress of the ZrO2 coatings increase as the substrate temperature goes up .

随着基板温度的升高，涂层表面颗粒逐渐长大，表面粗糙度增大；

TEM tests show that the particles of TiO2 / ZrO2 were found in the water droplets coated by oil phase .

通过对复合微乳液的透射电镜测试，结果表明TiO2/ZrO2复合微粒在油相包裹的水池中生成。

Using sol-gel prepared ZrO2 ( CaO ): Yb3 + / Tm3 + upconversion system materials .

采用溶胶-凝胶法制备了ZrO2（CaO）：Yb3+/Tm3+体系的上转换发光材料。

Among them , ceramic bearing material is mainly zirconia ( ZRO2 ) and silicon nitride ( SI3N4 );

其中，陶瓷轴承材料主要为氧化锆（ZRO2）和氮化硅（SI3N4）；

Oxide ( MgO , SiO2 , TiO2 and ZrO2 ) - supported platinum catalysts were prepared .

合成了氧化物（MgO、SiO2、TiO2和ZrO2）负载的铂催化剂，考察了它们对氧气常压氧化成醇生成戊醛反应的催化作用。

The interface between 316L stainless steel fibre and HA ( ZrO2 ) matrix is partly concavo-convex .

316L不锈钢纤维与HA（ZrO2）基体间的界面表现为部分凹凸不平，紧紧地咬合在一起。

Zirconia ( ZrO2 ), with high strength and toughness , excellent biocompatibility and corrosion resistance , is one of the potential dental repair materials .

氧化锆（zirconia，ZrO2）具有较高的强度和韧性、优良的生物相容性和耐腐蚀性，是一种颇具潜力的牙科修复材料。

Al2O3 / ZrO2 composite ceramics prepared by explosion synthesis , through XRD analysis , presented high purity of Al2O3 / ZrO2 eutectic .

通过爆炸合成反应制备出al2O3/ZrO2共晶复合陶瓷，通过XRD分析，可得到纯度很高的al2O3/ZrO2共晶相。

According to the results on the structure and surface morphology of ZrO2 thin films , the dependence of deposition temperature on surface evolution and its physical mechanism are discussed also .

此外，根据薄膜微结构和表面形貌的研究结果，探讨了沉积温度对薄膜生长行为的影响及其物理机制。

At last , we research on the change of nucleation agents ( TiO2 and TiO2 + ZrO2 ) and their effect on the glass-ceramic .

最后，对TiO2和TiO2+ZrO2进行深入研究，对比TiO2晶核剂和TiO2+ZrO2复合晶核剂对微晶玻璃性能的影响。

The Weibull distribution , abrasion performance and cutting lifetime of Al2O3 of Al2O3 / ZrO2 ( Y2O3 ) composites were investigated .

研究了Al2O3和Al2O3/ZrO2（Y2O3）复合刀具材料的Weibull分布、磨损形态及其切削耐用度。

Studies on WO3 / ZrO2 and MoO3 / ZrO2 Solid Superacid Sytems

WO3／ZrO2和MoO3／ZrO2固体超强酸体系研究

The bridge type josephson junctions are fabricated by weaken thin films YBaCuO / ZrO2 ( 100 ) with water selectively .

该文介绍的是有选择性地弱化YBaCuO／ZrO2（100）薄膜制备Josephson桥结的一种简洁方法，分析、讨论了该方法影响结参数的各种因素。

It is a good way to improve the properties of the structural ceramics by using additives . The mullite / ZrO2 / Al2O3 composite ceramics have good mechanical property .

利用添加剂改善结构陶瓷材料的性能是一种较佳的方法，复合陶瓷mullite/ZrO2/Al2O3具有较高的力学性能。

In the second part , nanocrystalline ZrO2 : Eu and YVO4 : Eu powders with different shapes were synthesized by a surfactant-assisted hydrothermal process .

第二部分尝试用水热法合成了不同形貌的掺铕荧光粉（ZrO2：Eu、YVO4：Eu），并对它们的荧光特性进行研究。

The effect of thin film construction on the damage , and the action of SiO2 protecting coating in increasing the laser damage threshold of ZrO2 / SiO2 film are analyzed .

分析了薄膜结构对薄膜受破坏的影响，以及SiO2保护膜在提高ZrO2/SiO2膜的抗激光强度中的作用。

The Pt / ZrO2 catalyst prepared using the plasma treatment and calcination method shows higher reactivity for the CH4 / CO2 reforming with regard to the sample without plasma treatment .

等离子体处理制备的Pt/ZrO2催化剂在甲烷二氧化碳重整反应中显示出高于常规催化剂的活性。

Possible ( ZrO2 ) n ( 1 ≤ n ≤ 5 ) clusters were calculated by the density functional method , and the infrared spectra of related cluster were simulated simultaneously .

应用密度泛函理论方法计算了各种可能的（ZrO2）n（1≤n≤5）团簇结构，同时模拟了对应团簇结构的红外光谱。

We can get the better prepared condition of the superacid catalyst SO42 / ZrO2 for the synthesis of Octyl-Polyglycoside through the mathematics way of orthodoxy design .

本文运用正交设计实验方法研究了SO4~（2-）／ZrO2固体超强酸在辛基多苷合成中的催化活性，探讨这种固体超强酸的制备条件对其催化剂性能、结构的影响。

2 ) Metal-insulator-semiconductor ( MIS ) structures with high-K gate dielectric ( Al2O3 / ZrO2 ) containing Ge nanocrystals were fabricated .

2）首次制作了埋嵌有Ge纳米晶的高K栅介质（Al2O3、ZrO2）形式的金属绝缘体半导体（MIS）器件，观察到了Ge纳米晶显著的电子存储特性。

The quarternary composite ceramic material with Al2O3 / mullite ( 3 / 1 ) + 15 % ZrO2 + 10 % SiC was made by hot pressing method .

用热压的方法制备了Al2O3／莫来石（3／1）＋15%ArO2十10%SiC四元复合材料。

ZrO2 ( 9mol % Y2O3 ) nano crystal powders is prepared by modified sol-gel method massing the gel to precipitate before being dried .

对溶胶-凝胶法进行改性，使凝胶聚沉为沉淀物，进而可以成功地合成ZrO2（9%Y2O3）纳米粉体。

In addition , the pore diameter , pore volume and the surface area of ZrO2 porous nanosolids could be controlled by changing the solvent species , hot press temperature and pressure .

另外，通过改溶剂的种类、温度和压力可以在一定程度上调变多孔纳米固体的孔径、孔容及比表面积。