首页 / 词典 / good

peen

  • 网络喷丸;锤头;锤打
peenpeen

noun

1
the part of a hammerhead opposite the flat striking surface (may have various shapes)

数据来源:WordNet

  1. Numerical Simulation and Parameter Optimization for Shot Peen Forming Process Based on Temperature Gradient

    基于温度场的喷丸成形数值模拟及参数优化

  2. Theoretical Investigation and Finite Element Simulation of Laser Peen Forming of Metal Plate

    金属板料激光喷丸成形理论研究与数值模拟

  3. The application and development of advanced shot peen forming technologies

    先进喷丸成形技术及其应用与发展

  4. Experimental Study for Micro Laser Peen Forming of 8011 Aluminum Alloy Foil

    8011铝合金板材脉冲激光微冲击成形实验研究

  5. Microscale laser peen forming of sheet metal and its research situation

    板材脉冲激光微冲击成形技术及研究现状

  6. Numerical simulation of narrow strip peen forming

    窄条喷丸成形的数值模拟

  7. Technology and Equipment of Peen Shot Strengthen for Drive Gear of Rear Axle in Heavy Duty Vehicle

    重型车后桥主动齿轮喷丸强化工艺及设备

  8. The study presented herein is the numerical simulation of a narrow strip peen forming process , an effective method to form single curvature surfaces .

    在分析窄条喷丸成形的变形特点基础上,提出了通过等效变形实现数值模拟的方法。

  9. For half an hour I haf peen trying to say dot I am ready to bose .

    我不是讲了半天愿意给你当模特儿吗?

  10. Shot peen forming and laser peen forming , two peen forming technologies , have been used to form sheet metals which have gently shapes .

    机械喷丸成形和激光喷丸成形是两种喷丸成形技术,用于成形外形变化平缓的蒙皮类钣金零件。

  11. The primary problem in using the method of Numerical Control Manufacture-Shot Peen forming to manufacture the part on rough is to determine the size of the roughcast .

    采用毛坯数控加工-喷丸成形方法的首要问题是确定坯料结构尺寸。

  12. This paper presents the principle , methods and development of forming aerodynamic break shape of wing skin panel with emphasis on the peen forming process commonly used in the aircraft manufacturing today .

    介绍了机加厚蒙皮类型机翼壁板气动弯折外形的成形原理、方法及其发展,着重介绍了目前飞机制造中普遍采用的喷丸成形方法。

  13. The effect of wheel speed on shot peen_forming is studied through the experiments , and the result shows that chordwise shot peen deformation is the power function of wheel speed .

    试验研究了叶轮转速对抛丸成形的影响,结果表明,横向抛丸变形是叶轮转速的幂函数。

  14. Thermomechanical simulator ′ s hydraulic servo system requires working both in big flux area and small flux area , and it needs to control peen ′ s position exactly in a large range of work area .

    热力模拟实验机的液压系统既要求工作在大流量区域,又要求工作在微小流量区域,需要在极宽的工作范围内精确地控制锤头的位移。

  15. Microscale laser peen forming (μ LPF ) is a novel plastic forming process which utilizes a high pressure plasma to deform the 3D profiles and it has great potentials for the manufacturing of MEMS parts .

    激光微冲击成形就是利用脉冲激光产生的高压等离子体的冲击力效应,使超薄板材产生塑性变形的新技术。该技术在制造微机电系统零件方面有巨大的潜力。

  16. Laser peen forming ( LPF ) is a novel technique that laser-induced shock wave is used to impart residual stress field in the material and finally shape the sheet metal . It is the combination of traditional peen process and new laser process .

    激光喷丸成形是利用激光产生的冲击波使金属板料产生一定分布的残余应力场从而实现板料变形的一种新型成形技术,是传统喷丸工艺和现代激光加工技术的结合。

  17. This paper presents effect of heat treatment process on peen shot strengthen ing performance of rear axle pinion gear and peen shot methods of hypoid gear , and also introduces the main structure features of peen shot machine for rear axle pinion gear .

    讨论了热处理工艺对后桥主动锥齿轮强化喷丸效果的影响以及准双曲面螺旋锥齿轮强化喷丸方法,介绍了研制的后桥主动锥齿轮强化喷丸机的主要结构特点。