首页 / 词典 / good

fsw

  • 网络搅拌摩擦焊;摩擦搅拌焊接;女性性工作者;搅拌摩擦焊接
fswfsw
  1. Effect of FSW Parameters on Welding Properties of 2519 Thick Plate

    搅拌摩擦焊工艺参数对2519厚板焊接性能的影响

  2. Metal flowing is the main course during FSW .

    搅拌摩擦焊过程中的金属塑性流动是形成焊接接头的主要过程。

  3. Study on Optimization of Stir Head for FSW Based on Genetic Algorithm

    基于遗传算法的搅拌摩擦焊的搅拌头优化研究

  4. FSW can improve mechanical properties of the welding joint remarkably .

    可见摩擦搅拌焊能够显著提高Al-Mg-Mn-Sc-Zr合金板材焊接接头的力学性能。

  5. This is the idea of computing Radiation stress by FSW theory .

    这就是用流函数理论计算辐射应力的思路。

  6. Effect of tool tilt angle on formation and mechanical property of FSW

    搅拌头倾角对FSW成形和接头力学性能的影响

  7. The welding tool technology is one of the most important factors to the FSW processes .

    搅拌焊接工具技术是搅拌摩擦焊工艺最重要的因素。

  8. Study on Plastic Flow Characteristic s of FSW

    搅拌摩擦焊流变特性研究

  9. So fsw method is better than conventional welding methods in welding pure aluminum .

    由此认为,采用FSW法焊接纯铝是常规焊接方法所不能比拟的。

  10. New FSW Technology with Array Jet Impingement Heat Sink Mode

    阵列射流冲击热沉搅拌摩擦焊接新方法

  11. A new starting point of friction stir welding : welding steel with FSW

    搅拌摩擦焊技术的新起点&钢的焊接

  12. Effect of Temperature on Mechanical Properties of 2219 Aluminum Alloy and Welding Joint of FSW

    温度对2219铝合金及搅拌摩擦焊焊接接头性能的影响

  13. The Finite Element Analysis for Thermal-mechanical Coupled Field of FSW Based on ANSYS

    基于ANSYS的FSW热力耦合有限元分析研究

  14. Numerical simulation of tensile deformation on aluminum alloy FSW lap joints

    铝合金搭接搅拌摩擦焊接头拉伸变形的数值模拟

  15. Application Research of FSW Welding Process for Joining Propellant Tanks in New Generation Launch Vehicle

    新一代运载贮箱搅拌摩擦焊应用研究

  16. Effects of tool dimensions and welding parameters on the quality of plastics FSW joints

    搅拌工具尺寸和工艺参数对塑料搅拌摩擦焊焊缝质量的影响

  17. Structure and Property of FSW Welds of 2519 Aluminum Alloy

    2519铝合金搅拌摩擦焊焊缝组织与性能

  18. Distribution and control of residual stresses in FSW joints

    FSW接头残余应力分布及控制技术

  19. Investigation of acting force of stirring pin in FSW and its effect

    FSW中搅拌针作用力及其影响的研究

  20. Analysis of Bubbling on the Surface of FSW Welding Seam

    2A14铝合金搅拌摩擦焊焊缝表面鼓包原因分析

  21. COPPER FSW Process of Copper and Its Alloy

    铜及铜合金的搅拌摩擦焊工艺研究

  22. Feasibility of Popularization and Application of Hand Brakes Type FSW on General Freight Cars

    FSW型手制动机在通用货车上推广应用的可行性

  23. Comparison of Microstructure and Properties of FSW and MIG Joint for Aluminum Alloy

    铝合金搅拌摩擦焊与熔化极氩弧焊接头组织性能比较

  24. The joint properties of FSW are superior to that of fusion weld .

    搅拌摩擦焊的接头性能普遍优于熔化焊的。

  25. Effect of rotating speed on FSW joint

    旋转速度对6063铝合金搅拌摩擦焊接头力学性能的影响

  26. Impact properties of 6063 Al alloy FSW weld

    6063铝合金搅拌摩擦焊接头冲击断裂分析

  27. This paper studied the fracture mode of Al-Li alloy FSW joint at different welding speeds .

    对铝锂合金搅拌摩擦焊接头断裂模式随焊接速度提高的变化规律进行了深入的研究。

  28. A three-dimensional heat transfer model based on the tool shape and size for FSW is established in this paper .

    根据搅拌头形状与尺寸,建立了FSW三维传热有限元模型。

  29. Investigations on FSW thick aluminum plate Sealing Additive for Aluminum Thick Oxide Film

    厚铝板的搅拌摩擦焊接工艺研究铝厚膜常温封孔剂的研制

  30. This paper gives a brief account of the subsonic experimental investigations of FSW models .

    本文介绍了某型飞机前掠翼气动布局的低速风洞实验结果。