锡磷青铜

  • 网络Tin phosphor bronze;tin phosphorus bronze;ECuSn-C;ECuSn-A;ECuSi-A
锡磷青铜锡磷青铜
  1. 黄铜和锡磷青铜应力松弛动力学研究

    Study on stress relaxation kinetics equation of brass and bronze alloys

  2. 紫铜与碳钢、锡磷青铜、黄铜的电阻钎焊

    Resistance Brazing of Copper With Carbon Steel , Phosphor Bronze or Brass

  3. 铈对锡磷青铜铸造与变形组织的影响

    Effect of Ce on Structure and Property of Sn-P Bronze

  4. 锡磷青铜板带材生产的关键技术

    Key Technology for Production of Sn-P Bronze Plate and Strip

  5. 现代锡磷青铜带材生产工艺与技术

    Modern Process and Technology for Producing Phosphor Bronze Strip

  6. 终端:亚光比对锡磷青铜,镀镍。

    TERMINALS : Matte-tin over nickel over phosphor bronze .

  7. 锡磷青铜带是当前应用最广泛的铜合金弹性材料。

    Phosphor bronze strip is the most widely used ductile material of copper alloys at present .

  8. 现代锡磷青铜带材生产线的建设及其工艺与装备的选择

    Construction of a Modern Production Line for Phosphor Bronze Strip and Selection of Processes and Equipment

  9. 阳极磷铜变形抗力的实验研究高锡磷青铜压力加工材料的研制

    Experiment of anodic phosphor copper deformation resistance A Study on the Phosphor Bronze With High Tin Content

  10. 旧料生产锡磷青铜带材急冷破鳞开裂原因及其探讨

    Study of Cause for Fracture of Phosphor Bronze Strip Produced with Scraps during Rapid Cooling for Removing Surface Scales

  11. 阐述了在实际生产过程中,因大量使用镀白旧料生产锡磷青铜带材,在急冷破鳞时易出现开裂现象及其产生的原因。

    The cause for the fracture of phosphor bronze strip during rapid cooling for removing the scales on its surface is studied .

  12. 水平连铸锡磷青铜表面裂纹形成原因及探究镁合金反重力消失模铸造临界阻流面积的研究

    Research of Surface Crack on Phosphor Bronze Strip Produced by Horizontal Continuous Casting Critical Gate Area of Mg Alloy in Counter-gravity EPC

  13. 总结了安徽鑫科新材料股份有限公司高精度铜板带材生产线项目的建设情况,并就现代锡磷青铜带材生产线的建设及其工艺装备的选择作一介绍。

    The construction of a modern production line for producing high precision phosphor bronze strip and the selection of processes and equipment are summarized .

  14. 锡磷青铜带材的横向弯曲性能这一重要的质量指标对其最终制品的质量有很大的影响。

    The bending property in transverse direction of tin-phosphor bronze strip is a very important quality index which has a great inference on the quality of final products .

  15. 锡磷青铜作为广泛应用的弹性合金材料,生产上要求其尺寸精度高、表面质量好、板形和性能优良。

    Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension , good surface quality , excellent shape of strip and properties for production .

  16. 内部采用一体的黄铜电源带,锡磷青铜的插孔簧片,硬连线电气结构,无铆钉连接或无摩擦触点,可保证接触良好并提高了长期满电气负荷下的可靠性。

    Interior structure consists of one-piece Copper power belts , Phosphor Bronze jack strips and rigid connecting wires without rivet or friction , ensuring close contact and long-term reliability .

  17. 铸造锡磷青铜合金组织中存在显微缩松、枝晶偏析和反偏析是冷加工报废的主要原因。

    There are some micro-shrinkage porosity / dendrite segregation and inverse-segregation in the strip billet of horizontal continuous casting , which are the main reasons for rejected castings during mill machining .

  18. 并测试了其物理和机械性能,分析和讨论了实验结果,证明该合金可以取代锡磷青铜在某些工业部门中的应用。

    The meas - urement of its physical and mechanical properties ; the analysis and discussion of the experimental results . The alloy can be substitute for tin phosphor bronze in some industrial sections .

  19. 该文就现代锡磷青铜带材生产的熔炼与铸造、退火、轧制、清洗、矫平、剪切等工艺与技术作一介绍。

    This paper introduces the modern process and technology for producing phosphor bronze strip with special references given to the technological steps of melting , casting , annealing , rolling , cleaning , tension leveling and slitting .

  20. 25钢基体锡磷青铜合金粉末等离子孤喷焊层,含有较多的强化相,与镀铬轮组成摩擦副,耐磨损性能明显优于由QA19-4青铜和镀铬轮组成的摩擦副。

    By using plasma arc method an Sn-P bronze hardfacing formed on steel 25 , which contains more strengthening phases . The wearing property of the friction pair consisted of Sn-P bronze and Cr-plated wheel is better than that of bronze QAl 9-4 and Cr-plated wheel .

  21. 本法已用于测定锡青铜、磷青铜和铝青铜中的铜。

    This method has been applied satisfactorily to determine copper in copper alloys .