腐蚀破裂

应力腐蚀破裂机制为膜破裂控制的阳极溶解。

The mechanism of SCC is an anodic dissolution with film rupture rate-controlling .

800合金的碱性应力腐蚀破裂I.外加电位的影响

Caustic stress corrosion cracking of aloy 800 part 1 . the effect of applied potential

CNG储气瓶的硫化氢腐蚀破裂及预防措施

Sulfur Hydrogen Corrosion Cracking and Prevention Measures of the CNG Steel Cylinders

硫化氢应力腐蚀破裂（SulfideStressCorrosionCracking，SSCC）是制约管线钢应用的主要因素。

Sulfide hydrogen stress corrosion cracking ( SSCC ) is the main factor to restrain the application of the pipeline steels .

研究表明，介质浓度在2.0～6.0%，PH值在0.8～1.8范围是材料出现应力腐蚀破裂的敏感介质。

The research shows that the concentration of 2.0-6.0 % H_3S_xO_6 with pH 0.8-1.8 is that of a sensitive medium to stress corrosion cracking ( SCC ) .

PWR核电站蒸汽发生器传热管和主管道的应力腐蚀破裂研究

Stress corrosion cracking of steam generator tube and primary pipe in PWR type nuclear power plants

试验结果表明：在高温含B水中，U型试样试验5000h后无应力腐蚀破裂，静态月平均腐蚀速率小于2mg/dm2。

The results show that no stress corrosion cracking in U shape samples is found and average static uniform corrosion rate is less than 2 mg / dm 2 after testing in high temperature borated water for 5 000 h.

Fe-Cr-Ni合金碱性应力腐蚀破裂界面反应规律的研究

An Investigation on Interface Reaction Regularity for Caustic Stress Corrosion Cracking of Fe-Cr-Ni Alloy

通过电化学技术，采用模拟贫铬区的钢种研究了敏化奥氏体不锈钢在H2S2O6介质中的应力腐蚀破裂机理。

The stress corrosion cracking ( SCC ) mechanism of sensitized austenitic stainless steels in polythionic acid solutions was studied by means of electrochemical technique , using the sensitized steels to simulate the chromium depleted region .

氮化处理改善1Cr18Ni9Ti钢在MgCl2溶液中应力腐蚀破裂性能的研究

An investigation on resistance of a nitrided stainless steel to stress corrosion cracking in boiling 42 % mgcl_2 solution

用止裂法研究X56G管线钢焊缝金属的应力腐蚀破裂

Study on Behavior of Stress Corrosion Cracking of Pipeline Steel ( X56G ) Weld Metal by Stop Cracking Method

以应力腐蚀破裂（SCC）为代表的环境致裂（EAC）问题是影响核电设备长期安全运行的关键问题，而裂纹尖端微观区域的力学状态是影响环境致裂裂纹扩展速率的重要因素之一。

Environmentally assisted cracking ( EAC ), especially stress corrosion cracking ( SCC ), is a core issue in the long-term safety operation of the nuclear power equipments , and the mechanical state in crack tip is one of the important factors affecting the EAC growth rate .

304不锈钢在高温水中的应力腐蚀破裂

Stress corrosion cracking of 304 stainless steel in high temperature water

石油热采注汽管线腐蚀破裂原因

Causes of Corrosion Cracking of Steam Injection Pipeline for Oil Production

辐照促进应力腐蚀破裂研究的进展

Progress in the Study on Irradiation - assisted Stress Corrosion Cracking

800、600和690合金的铅致应力腐蚀破裂

Lead-induced stress corrosion cracking of alloys 800 , 600 and 690

印染设备的应力腐蚀破裂及防护

Stress Corrosion Cracking and Its Proofing of Dyeing and Finishing Equipment

炼厂两种应力腐蚀破裂的剖析

Analysis of the two kinds of stress-corrosion cracking of refinery equipments

核电工程材料的应力腐蚀破裂研究

Stress corrosion cracking of engineering materials used in nuclear power plants

管线钢应力腐蚀破裂的机理与寿命预测

Mechanisms of Stress Corrosion Cracking of Pipeline Steels and Lifetime Prediction

天然气长输管线应力腐蚀破裂的敏感环境条件

The Susceptible Environmental Conditions of Stress Corrosion Cracking of Gas Pipelines

奥氏体不锈钢在连多硫酸中的应力腐蚀破裂

The Stress Corrosion Cracking of Austenic Stainless Steel in Polythionic Acid

奥氏体不锈钢辐照促进应力腐蚀破裂的模拟研究

Simulating research on irradiation assisted stress corrosion cracking of austenitic stainless steel

304不锈钢微观组织变化对应力腐蚀破裂的影响

Effect of Microstructure Change on Stress Corrosion Cracking of 304 Stainless Steel

电位对核电用镍基合金传热管应力腐蚀破裂的影响

Effect of electrode potentials on SCC of Ni base alloys

电阻焊管在混合硝酸盐溶液中的应力腐蚀破裂

Stress Corrosion Cracking of ERW Pipes in Mixed Nitrate Solution

用慢应变速率法评定低合金钢焊接接头的应力腐蚀破裂

Stress Corrosion Cracking of Low Alloy Steels and Welded Joints in Sea Water

冷加工对800合金抗碱性应力腐蚀破裂的影响

Effect of cold work on the caustic stress corrosion cracking of alloy 800

化学镀镍换热器管束腐蚀破裂失效分析

Failure Analysis of Corrosion Cracking of Heat Exchanger Tubes Packing with Electroless Nickel

石化设备应力腐蚀破裂环境评价

Analyses of stress corrosion cracking environments of petrochemical equipment